I have Problem in AutoCAD 2012 Reverse command.
Reversed horizontal line type does not display in AutoCAD 2012.
But if i open same file in AutoCAD 2010 or 2011 it displays.
This is Problem with Only line/pline drawn horizontally. Vertically drawn line/pline displays reversed line using reverse command.
How can i get horizontal mullions to cut through vertical instead or reverse?
View 2 Replies View RelatedI assume it's just my autocad display but I can never tell if lines and are drawn correctly or not. I'll draw construction lines and circles and grip edit my linework to snap to the end points and arc midpoints perpindicular to the circle but there are still overlapping displays. In the attached image I've snapped to arc points to the circle and the edges of the hatch to the extension/intersection of them and this is how it still displays.
Yes, I am constantly regenning and my arc smoothness is set to 10000.
I must have changed a setting and now I cannot figure out what I did.
On AutoCad at school, when drawing a line, there is a light blue dialogue box that would pop up above the cursor telling you the length of the line before you set it. (not the coordinates).
This is not showing up on the educational version of AutoCad I am running at home.
New to this video editing game, just have a question regarding 4.3 and 16.9. i have a Canon XM2 which has a setting in the menu for 16.9 wide screen format. When this is selected on the camera the view finder shows a distored image (squshed). I have also found a setting that when 16.9 is turned off you can display 2 horizontal lines on the display. my question is am i better off shooting footage with the 16.9 turned off on the camera and then using Videostudio pro x4 to create the 16.9 format(if this can be done).
View 1 Replies View Relatedhow to break diameter line into horizontal line at the end ?... there's no such option in editor style (I want to have 2 arrows for this diameter, not one as it is in editor options)
View 2 Replies View RelatedIllustrator 15.1/CS5 on Mac used to display selected text in reverse and would show handles for text on a path. Now it does neither.
View 1 Replies View RelatedI have made line types with text and need to reverse the direction that the text reads. The text autocorrects based on UCS north. The UCS in the drawing is rotated 90 degrees so line text reads upside down. I type in the reverse command but the text does not change.
View 1 Replies View RelatedIs there a way of reversing the start and end points of a line? I have a lot of mirrored lines on my model, and so the direction (start/end) is also mirrored. This poses a problem when i export the model to another program witch has a coordinate system based on the direction of the entity (in this case a line). So i come back to the question, is it possible to change(reverse) the start/end position to already drawn (mirrored) lines? Btw i am using acad2011
View 2 Replies View RelatedI have a special ditch profile that I'd like to use a linetype with arrows on. Currently, it shows the arrows going up station with my mainline profile. i.e. now water does flow uphill...
How can I flip this line?
On my LED monitor (Samsung XL2370), horizontal and veritcal lines display as different hues. Is there an Autocad setting to work with this or is it maybe some setting on my monitor?
View 1 Replies View RelatedI have the bottom axis selected and trying to change my minor tick interval from 5' to 2.5' on the grid in the Horizontal Axes tab, but each time I type in 2.5' my minor horizontal tick intervals disappear. The lowest I can set my interval is to 3.5'. What is causing the interval to disappear? The major tick interval is set to 50' in the Horizontal Axes tab and my Major tick interval is 20' in the Vertical Axes tab with 2.5' for the minor. My Display settings have everything unfrozen and turned on.
Working in AutoCAD Civil 3D 2011
I must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
C3D 2012 SP3 on Win 7 Pro:
I have an alignment with horizontal PVI points that are coincidental with COGO points. I want to display in a profile view, a surface elevation at the alignment PVI points in a band style. Is it possible to do this? If so, how?
I wonder if the RM can be used in reverse, i.e. to find which drawings reference a certain file.
Or is there another tool for this?
Can you reverse the direction of an auto feature line generated from a corridor in C3D 2012?
View 4 Replies View RelatedAfter closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedUsing ACAD LT 2009. Update 3.
I've tried some of the settings for the mleader text placement. I'm trying to get the text to sit on top of a horizontal line. And an angled leader from the horizontal line to the object I am describing, ending in a dot.
All this is working fine, the lines, dot, etc. It's set for straight, not spline. And max. 2 leader points. All works as I want here.
What isn't working well is the text placement. I am able to have the text be horizontal, this works. But I can't get it to have the text above the horizontal line. I can set the leader connection to underline top line, or underline bottom line, or underline all text. These 3 choices seem sort of retarded. The first two put the text right on the line with no space. Doesn't look good. The third choice puts the text a bit above the line, looks perfect, except that there is now an additional line below the horizontal leader line, and that looks dumb.
Am I missing something? Has this feature matured more in later versions?
The text commant in a drawing has the option to attach an arrow head with a leader. I want the text to be horizontal, so, i drag the leader line approximately horizontal.
Is there a way to make it horizontal? i tried pressing shift but no
OK, something I did completely displaced my ribbon from the default horizontal location to either a floating or dockable vertical layout. It's probably staring me right in the face but how can I change it back?
View 2 Replies View RelatedI need to dimension numerous angles in a drawing, but I have a constraint on where I need the dimension to start from. I'm looking for the "least number of mouse-clicks" solution on this, since it's angles.
I need the dimension to always start from a quadrant, preferably 0 degrees.I'd prefer to simply pick (1) line and have AutoCAD auto-magically dimension that line from 0 degrees, rather than my having to draw short horizontal lines at each of these lines, then pick each one inside the DIMANGULAR command.
How to make oblique lines to be horizontal when copied?
I’m wondering if there is a coot tool that enables copying a set of oblique lines to make them horizontal.
Sure there are many ways to do that but looking for the most brilliant way.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
What is the industry standard regarding horizontal vs. vertical scale? More specifically, should the exaggerated vertical scale be proportional to the horizontal scale?
For example, if I have a drawing that has a horizontal scale of 1" = 100', should my vertical scale be 1" = 10'? Or if my horizontal scale is 1" = 30', should my vertical scale be 1" = 3'? Obviously, we have the ability to make the vertical scale anything we want but what is there a recognized industry standard that correlates the horizontal scale to the vertical scale?
I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?
View 9 Replies View RelatedI'm getting a strange horizontal line (sometimes 2 lines) on my D800 RAW files when opened from Bridge into Camera Raw - see picture 1
If I open the same file in Windows picture Viewer there are no lines - see picture 2 - Note, this is the same file but from my backup drive and has never been opened in Adobe
I've applied all the latest updates to Photoshop. At first I thought either my camera was broken or the memory card corrupted but the file that has not been near Adobe is OK.
I'm just getting a horizontal line when I try to type a letter in Photoshop CS6. No Brush Presets it seems. I was previously Painting in PS CS6. I use Apple OS X Ver 10.8.
View 2 Replies View RelatedI need to cover some details about the photo such as: date - location, etc.. - Until now I used the brush tool with a stroke to cover the details I have mentioned, but I can not run it with the mouse perfectly horizontal line. There is another way that I could use?
View 2 Replies View Relatedthis in an issue ive noticed for a long time now across a few versions of ACAD, not sure whats causing it. When i try to draw an XLINE sometimes the command will get locked into either horizontal or vertical mode, without me choosing that option. seems to based on the OSNAP pickpoint i grab maybe.
attached are pics of the process.
i run XLINE, pick endpoint and bam, its locked into horizontal mode, very annoying if im trying to make a vertical and horizontal line based off the same point.
How can I change the horizontal line color of a table (not the border line color)? I would like the border to be black, but the horizontal lines to be gray.
View 9 Replies View RelatedIs there a way to draw a perfectly vertical or horizontal line in Xara (Designer Pro 6) without manually lining it up with the grid? Sometimes I just need an instant horizontal or vertical line and I find I have to turn on the grid, zoom right in and meticulously place the pen tool so that the line is a perfect vertical (90 degrees) or horizontal (180 degrees) without slant or lean. Surely there�s a quicker and more reliable method?
View 8 Replies View Related1) I will be drawing a house facade in plain lines in an orthographic view. Once one window is drawn, can I duplicate this several times along an imaginary horizontal line? If so, what tool or action does this?
2) Similarly, is there a way to duplicate a brick outline at a desired spacing many times along an imaginary horizontal line, and then duplicate this course many times on top of each other to fill a wall?