VideoStudio :: Display 2 Horizontal Lines On Display
Dec 4, 2011
New to this video editing game, just have a question regarding 4.3 and 16.9. i have a Canon XM2 which has a setting in the menu for 16.9 wide screen format. When this is selected on the camera the view finder shows a distored image (squshed). I have also found a setting that when 16.9 is turned off you can display 2 horizontal lines on the display. my question is am i better off shooting footage with the 16.9 turned off on the camera and then using Videostudio pro x4 to create the 16.9 format(if this can be done).
View 1 Replies
ADVERTISEMENT
Nov 8, 2013
On my LED monitor (Samsung XL2370), horizontal and veritcal lines display as different hues. Is there an Autocad setting to work with this or is it maybe some setting on my monitor?
View 1 Replies
View Related
Dec 9, 2010
I have a video file created from one of my old VHS tapes. Unfortunately the display shows two rows of tracking lines about two inches from the top and bottom. Can VS ProX2 filter them out?
View 4 Replies
View Related
Sep 11, 2012
I have Problem in AutoCAD 2012 Reverse command.
Reversed horizontal line type does not display in AutoCAD 2012.
But if i open same file in AutoCAD 2010 or 2011 it displays.
This is Problem with Only line/pline drawn horizontally. Vertically drawn line/pline displays reversed line using reverse command.
View 9 Replies
View Related
Jul 26, 2012
I have the bottom axis selected and trying to change my minor tick interval from 5' to 2.5' on the grid in the Horizontal Axes tab, but each time I type in 2.5' my minor horizontal tick intervals disappear. The lowest I can set my interval is to 3.5'. What is causing the interval to disappear? The major tick interval is set to 50' in the Horizontal Axes tab and my Major tick interval is 20' in the Vertical Axes tab with 2.5' for the minor. My Display settings have everything unfrozen and turned on.
Working in AutoCAD Civil 3D 2011
View 7 Replies
View Related
Oct 8, 2013
C3D 2012 SP3 on Win 7 Pro:
I have an alignment with horizontal PVI points that are coincidental with COGO points. I want to display in a profile view, a surface elevation at the alignment PVI points in a band style. Is it possible to do this? If so, how?
View 1 Replies
View Related
Jan 28, 2013
I am currently writing a book that will initially be sold as a PDF but may later go on the i Book store, however I don't have a Retina display myself and what is the best practice for making screenshots from a normal display look acceptably sharp on a Retina display?
I have Photoshop along with the iOS simulator that shows how the iPad or iPhone will look if they can be used in some way but I mainly need to get menu items and dialogue boxes from various applications in OS X and Windows looking good on Retina screens. I really don't want to pay out for a Retina display purely for this task that would only take a few hours of work at most.
View 10 Replies
View Related
Jan 23, 2013
After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies
View Related
Oct 13, 2012
Sometimes this happens. At other times nothing will display at all. I have also had a portion of the picture duplicated multiple times on the stage.
View 4 Replies
View Related
Oct 16, 2012
How do you add a display component to a display?
For example, Stairs have a stringer componet in plan display configuration but does not have a stringer componet in the Low Detail configuration. I need the stringer to show when I go to low detail how can I add a stringer componet in low detail.
View 9 Replies
View Related
Nov 1, 2012
Quick explanation of how to make columns display as columns in the coarse level of detail instead of just as sticks?
I know I'll have to edit the family but I can see anything obvious to change.
View 1 Replies
View Related
Dec 17, 2013
I just installed inventor. When I begin a part there is no display of the planes, only the corner indicators show up when I hover over a plane. Also, when a part is created, only the edges show up when I hover over them.
View 4 Replies
View Related
Sep 19, 2012
I am having problems viewing my contour lines after I create a surface. I create the surface using points. The contour lines will show up when I create the surface. After I close the program or the drawing, I am not able to see the contour lines again. The contour lines are on in the surface style. How can I see the contour lines without creating the surface again?
View 4 Replies
View Related
Nov 2, 2011
I have canon legria HFR 106 [URL]......
Problem is setting of the best resolution:
-FULL HD is making these horizontal lines (every other pixel line) if something moves in the picture so its not good
- lower camera setting makes the resolution to 1440x1080 which is 4:3 !! that's not the ratio of today (and youtube) and i didn't even realize it because video studio has 16:9 project settings and the ratio of outputted video seems right?
- Compared these: video 4:3, project 16:9, still images from another camera 4:3 -> fail
what do you recommend, is there a way to get full resolution better without those lines or other way to 16:9 ?
2. Also only recent and fast opening player to play those camera raw videos (.mts) is VLC-player. Is there a way to get it open those videos in zoom mode of 50% or 33% and not 100% they goes over my screen every time!
View 4 Replies
View Related
Oct 1, 2012
Is there a way to display more "lines" at the command line?
View 8 Replies
View Related
Sep 30, 2013
I'd like to know the coordinates relative to the last entry when creating lines (splines). When creating splines using the line tool, it would be useful to know the coordinates of my current cursor position relative to the last point in an easy way, so I can draw precisely a long line without having to memorize the coordinates of the last point.
Initially, I thought the 'Keyboard Entry" rollout would show the values that reflect what I'm doing visually, just like the rectangle tool for example, or pretty much any other tool, I don't know why the 'line' tool is different but anyways.
View 1 Replies
View Related
Dec 4, 2013
I used Solid Edge for my entire professional career. One thing that is driving me batty is how, when necessary in a view for clarity, tangent lines are displayed and how to change them, or at the very least, come up with a work around to display them how is needed. In general, tangent lines are first, supposed to be of thinner lineweight, but also, are not supposed to extend all the way across the surface of a part, they are to leave a small gap.
I have found and tried the option of displaying tangent lines, and also have checked the for shorten option. The issue is, in many of the parts the gap produced in HUGE. So I've spent a few hours tinkering, and I finally decided to try and define a new linetype using autocad express tools. So I tried this, but to my dismay I haven't been able to set up a linetype that only has a gap at the end. See attached jpeg for illustration.
View 2 Replies
View Related
Sep 17, 2013
I have drawn in essentially a sewer pressure pipe (using gravity part network because I don't have time to setup the other) and I am using PVC pipe and null structures at the joints. I created the pipe network from a feature line with verticies at the grade breaks and every 10'. As you can see in the picture the pipes are lining up but I have these straggling lines on the profile.
View 2 Replies
View Related
Jan 21, 2013
I have recently installed Revit on my windows interface via Parallels on a best of the line Macbook Pro. For some reason the display is hazy and the lines and annotations are not very clear. I have attached the picture here as well.
View 3 Replies
View Related
Mar 19, 2012
In AutoCAD, or some 3rd party software perhaps.
Is there a way to automatically display the dimension of lines or objects as you draw them? I looked at dimensional constraints, but AutoConstrain doesn't seem to have an option to automatically apply dimensional constraints....right?
View 1 Replies
View Related
Mar 11, 2013
Since downloading the new version I have ran across a display issue. When editing, all of the popup display boxes are too large and extend under my taskbar. I have tried everything such as changing the monitor's screen resolution to nearing every setting. And I have searched and attempted to come up with a fix from with in the preferences, UI layout, etc.
View 1 Replies
View Related
Jun 30, 2008
I'm trying to create a certain effect that is probably best illustrated with pictures
created by varying the thickness of lines, whether horizonal or part of letters or even symbols.
I don't know if this is even possible using photoshop to be perfectly honest. If that's the case, does anyone know the software that would be required?
View 9 Replies
View Related
Jan 31, 2013
Why do our feature lines all come in as the color white when xreffed into a drawing? Feature lines show up just fine in our topo drawing, so then we xref it into our design drawing and they all show as if the color is white when is is not in the layer properties. All other items (symbols, points, and lines) come in as the color they were drawn in the topo drawing.
View 3 Replies
View Related
Jul 6, 2012
I can't remember the option how to change the display of linetypes to show as solid instead of as two lines. I think this may be something to do with the 'solidfill' option.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 1 Replies
View Related
Feb 26, 2011
Have created a 42 minute movie that includes the accompaniment track and visuals for musical. I will show the movie via large media projector from the computer VGA out. I'm running 3X in Windows 7.
I am able to access extended desktop, duplicate desktop, etc. via function F4.
I need to be able to PAUSE the video (for live drama) and restart without the controls showing on the big screen. I need to be able to SHOW the movie while viewing the CONTROLS on my monitor display.
Can the "project playback" function be set up to play this way? If not, is there a recommended format I should export to to be able to control the movie this way? Any software recommended to show the movie with a public view and a control view on my monitor?
View 5 Replies
View Related
Jul 5, 2011
I'm looking to upgrade from my copy of Ulead's Media Studio Pro 7. According to the Ulead's web site, "Corel is not planning any future updates to this product" so I'm assuming that Video Studio Pro X4 would be Corel's replacement product.
Media Studio Pro is the FileStrip Mode of the Timeline Display. I'm experimenting with the trial version of Video Studio Pro X4 and I haven't found a way of getting that type of display mode. Is it possible to get the timeline to display such a mode?
View 2 Replies
View Related
Oct 23, 2012
I am an avid user of New Blue Effects. Film Effects, Video Essentials V and Stabiliser all appear correctly in the FX Filter drop down box and when one of these is clicked on, the correct New Blue effects display.However, with Video Essentials 111 and Colorfast, whilst they display in the FX Filter drop down box, when clicked on, nothing happens, the effects do not display, they are there when selecting "ALL" so they are installed correctly, Colorfast is not really an issue because it is just one item, but with Video Essentials 111, it is necessary to search through the complete FX list to find the one I want Not sure if this is a Corel issue or a New Blue issue. Using Video Studio X5 Ultimate.
View 11 Replies
View Related
Sep 25, 2012
Everytime i press the shift key and quotation mark key for the double quotation mark to display on my text on PS cs5 doesn't work. It display a double arrow instead.
View 4 Replies
View Related
Mar 21, 2011
As I launch a videocapture on videostudio pro X4, I don't get any video display on my screen, only hearing the sound. Afterwards, the generate file is OK with picture and sound.
View 5 Replies
View Related
Nov 15, 2013
I have come across - the 1st time - a series of mpg video clips which, assembled into a project file on a 3rd party usb memory stick, irregularly freezes the preview image and sound while playing, usually in the 1st or 2nd clip in the file. Searching for a reason, I have played the file on two machines across both usb2 and usb3 connections, and using different versions of VS, and the freezing of the play occurs in all of them. At different places in successive events. The same thing happens with individual clips in VS, and individual clips in other video player software like media player and VLC.
I've no reason to believe that the software or even the files are causing this. At least, not yet. The only common element seemed to be the memory stick, so I copied the files from the 3rd party item to one I know is usb3, opened the project file and after re-linking, played it. Same thing happened in the 3rd clip. The results to date suggest that the player software (any of them) in doing the background data load from the memory stick at some point is taking too long, and thus the freeze. Which led me to review the file formats and size.
The freezing files are interesting - mpg format, but way bigger than I had expected for the duration involved. For example, one of the freezing ones is 1min18sec duration and 99,791Kb in size. Compared to a 51sec 22,224Kb file taken on a different camcorder. The duration versus size differences are substantial (for only a 27 sec duration difference the size difference is nearly 5 times), and one wonders why? Both of them loaded into VS show as MPEG-1 format on a right click properties display.
As far as I am aware, mpeg-1 is the same as avi format, and mpeg-2 and mpeg-4 are compressed and thus smaller versions of the same file length without loss of quality. Why mpg file should freeze during play in VS X6, X5, media player and VLC, on a desktop and a separate laptop machine?
View 14 Replies
View Related
Mar 19, 2011
Trying out VS trial. The desktop display only allows full screen which gives me no access to anything else or minimized. What's up with that? I have a big monitor and certainly don't need all of it for one program.
View 5 Replies
View Related
