Windows 7 Enterprise SP1 - AutoCad 2011 - Current Microsoft Patches - Office 2010
I can get Gotham .OTF fonts working ok in Adobe applications (Photoshop, Illustrator), Microsoft Office Applications (Word, Excel, Outlook) and Archicad. But I cannot get the Gotham fonts to appear in AutoCAD. Do I specifically require .TTF files for the fonts to work correctly in AutoCad?
Attempted .TTF conversion that only wanted to replace the existing .OTF via Control Panel-Fonts...Uninstalled KB2753842 that seemed to be a forum topic of cinversation
After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
One of the few software that didn't play nice was CS3, so I had to re-install it. Now, many of the fonts won't show up. I'm doing a logo for a client and I need some fonts but fonts from the following- New Peninim, Corsiva Hebrew, Ariel Hebrew and/or Raanana-- don't appear after you engage the Type tool. What shows up in both Photoshop and especially Illustrator is a square box with nothing in it.
columns on line and followed 4 or 5 different "solutions"-- nothing seems to work. I even, against my suspicions, called the Adobe customer service and the best they could offer was to post a question here if my answer was not apparent.
Bearing in mind that I've put fonts in the Adobe folder, reset characters and a few other things since yesterday.
I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?
I am creating a document in Tamil. Normally I type in Google document. Then copy and paste in Word. It works perfectly.
Now I am creating a poster in Adobe illustrator. I did type in google and pasted in notepad. It works perfectly.
When I copy and past in Adobe Illustrator the font is not displaying correctly.
In preferences-->Type-->Text Engine options I selected 'Middle Eastern', previousy it was 'East Asia', after that the Tamil letters are getting displayed correctly.
I have seen another post which says I need to enable show Indic option. [URL] Unfortunately I do not have Indic option. My screen looks different
I have some tamil fount installed. When I tried to change the fount to tamil font, it does not work either. I have another font called Latha. When I changed to Latha font the character displayed in Tamil but all spelling went wrong in Tamil.
How can I make CorelDraw X5 not display fonts marked "hide" in the FONTS folder of Win 7? Scrolling through hundreds of fonts to find the one you want is a real nightmare.
ttf files into the windows/font folder like everybody says, but they wont appear in the font select menu. I've tried closing and opening photoshop, and I've tried uninstalling and reinstalling photoshop, AND uninstalling and reinstalling illustrator just to make sure, but to no avail. They all appear in the font folder, but photoshop will not recognize them. Furthermore, I've been able to add new fonts in the past, they display in the font menu just fine...but not the ones I recently tried to put in. What's going on here? Are there more than one kind of .ttf ? Is there a way to force photoshop to look at the font folder?
I've been tearing out my hair, trying to do this for hours...
for some reason, all of a sudden photoshop wont display any available fonts in my font list beyond the begining of the letter m. i have tons of fonts. not all of them are turned on. ones that are turned on though and that i have been using up to this point regularly are not accessable now.
When designing a sign for a customer, I take a photo of the existing signs, place on a new document in illustrator cs6, type text then scroll through the text character drop down menu to match the new sign text to the font that is currently on the customers signs, business card etc.
There are many different types of fonts and I would prefer not to have the adobe system fonts, asian, arabic and other fonts that are not used for my purposes.
Is there a way to remove them from this list.
I have tried deleteing them from the window 7 font manager but they are essential system fonts and it displays a message that some programes will not work if I delete them.
I have tried show/hide in the windows 7 font manager but this has no effect on the fonts displayed in illustrator.
When I open drawings created by others, I get a message " Specify font for Style OPT and "Arial Unicode MS" and a host of other fonts appear in the table. If I substitute this with Arial from the drop down list then the drawing opens. I believe Auto Cad automatically picks up either the SHX files in its own font directory or font files from MS office. My computer has Arial Unicode files in C:/Windows /Font directory and I do not know why it is not picking up the font from that file.
We have a customer that sends us drawings with Arabic fonts that we sometimes need to edit and insert Arabic fonts. Is this possible in the English version of AutoCAD? If so, how do we go about loading Arabic fonts?
I draw, and after, I would like to know, how to change the fonts in my custom line types (for example --HW--) from ARIAL to TAHOMA. If I change my Text syles and reload mu custom linetype it doesn't change the text fonts.
I'm trying to import a pdf underlay in AutoCAD 2012. However, every time I have imported it, the frame of the underlay shows up, but the pdf itself doesn't show up.
Contrast = 100 Fade = 0 Monochrome = No Show underlay = Yes Path is correct
I've tried importing image underlays (PNG files), and they work fine. Also, the pdf file is pretty big (about 100 MB), so I didn't know if that affected its ability to display. How to get this to show up?
How do I get rid of this "pin point" in my display. It shows up when displaying an isometric or perspective view. I would like to make a nice screenshot without it. There must be a variable somewhere?
I have big problem with Text in AutoCAD drawings. Text is missing and I can't write in new drawings as well. We have different systems xp x 64, xp x84 , windiows 7 x64 and windows 7 x 84. Different AutoCAD’s: 2010 2011,2012 and the same problem. The problem occurs in many files, so not only in this one. When text bloc don’t work it showing every time, when we want to write, on down ribbon “** Undefined symbol 101 and 102 ...” . When we want to open stiles for text AutoCAD Mechanical have critical error: “Unhandled Access Violation Reading 0x0000 Exception at e0533c85h” and closed. We have different computers with different graphical cards. We installed already SP 2 for 2012 and other versions are too upgraded. It looks like this problem isn’t connected with hardware. We are using local licenses. You can see this problem on attached pictures.
I assume it's just my autocad display but I can never tell if lines and are drawn correctly or not. I'll draw construction lines and circles and grip edit my linework to snap to the end points and arc midpoints perpindicular to the circle but there are still overlapping displays. In the attached image I've snapped to arc points to the circle and the edges of the hatch to the extension/intersection of them and this is how it still displays.
Yes, I am constantly regenning and my arc smoothness is set to 10000.
I suddenly am having a problem viewing underlays. It happens with PDF Files and DWF Files. When I insert the file nothing is displayed. I dont see a frame or an image. All I get is a point. When I select the point the underlay ribbon bar comes up. I have the show underlay selected. The Fade is Set to 0, In properties I can the layer is set to 0, but under view the height and width is all 0.00000.
I am running straight Autocad 2012 w/ SP1. Its 64 bit on Windows 7.
If I insert a pdf underlay into a drawing, it won't display or print out. I know a pdf has been inserted as I can use Erase-All and it will say an object has been selected. The funny thing is that it all worked fine a week ago, and now doesn't. I can open a drawing done months ago which was fine but now there is no pdf displayed.
I've checked various settings against another computer and they are the same.
I am having a problem with a bunch of existing drawings. The drawings displayed fine with Autocad 2009 but with 2010 the blocks have huge rectangles drawn around them. (so big they extend off the title block) We have a few machines running older versions and the drawings display fine but any machine with 2010 all displays these boxes.
I have a question on the display of the layers in the layer-pulldown. I have a client that is having problems with the display of his layers in the pull-down. They are not in alpha order. When he opened the dialog box they are listed correctly - what can cause this?
How do I set up a dwt so that linetypes appear the same no matter what the scale of the viewport. I tried AutoCad help but the recommended fix if I am reading it correctly is psltscale set to 1. That didnt work. We normally set our ltscale to 0.5. Should the scale of linetypes be controlled by the scale of the viewport? Isnt the scale of the viewport supposed to be multiplied by the ltscale so that the linetypes always appear the same no matter what the veiwport scale?
Another user has created a bunch of sketches and somehow has set the drawing up where all the viewport and our title block are displayed in white. model space everything is fine and is as it should be.
I've been working with a firm for 6 weeks now, and had no major AutoCAD problems for the first 5 weeks. We're running AutoCAD 2010 on my machine, and it crashes quite often when I close drawings, which is quite annoying. But last week after opening a series of drawings to print some stuff for the boss, and CAD crashing after every 1 or 2 prints, I got the message:
A display driver file (.hdi) is missing or has been corrupted. The program will be closed.
This problem may be caused by missing .hdi files in the following location:
C:program filesAutoCAD Architecture 2012drv
I ran a repair, then did a reinstall, and when neither of those worked I just uninstalled and reinstalled the whole program. I still got the error message, but I had opened AutoCAD Architecture and was using that instead for a bit and saw Autodesk do an update in the background. So I booted up AutoCAD 2010 and it was working again so I guess it fixed the problem. I used it for a few more days then yesterday I had to open and print another series of drawings for the boss and it crashed again after every one, as usual, and when I sat back down and tried to open up a drawing to work on it I got the same error message again. Frustrated and angry, I switched over to AutoCAD Architecture and imported my Classic setting and used that for the next day. But this morning I had to open and print 3 more drawings for the boss and Architecture crashed after every one, then it started giving me the same error that regular AutoCAD has been giving me about the missing .hdi file. I copied the drv folder from a co-worker's computer and replaced mine with the working one, but neither version of AutoCAD is working again.
So I ask, what do I do now? I can't keep uninstalling and reinstalling AutoCAD every week because of these crashes and missing .hdi files. I need a real fix, something to fix the constant crashes and missing files. Sometimes I have to open multiple drawings to pull blocks or whatever from an older drawing, and I can't risk CAD crashing after I close these drawings and me possibly losing some work on the file I am actually working on at the time. this is making me way less productive at work spending all this time trying to get AutoCAD to work.
I want to display the network server name automatically (preferably using a diesel expression).
I currently use diesel expressions to show the saved path and drawing name, but since we have a multitude of servers I'd like to show the server name as well. At the minute it just shows the network map name, i.e. N:, but I'd like to prefix that with the actual serve name, i.e. SERV-FILE-1 (or something like that).
I'm trying to figure out two things that have changed:
1) Lets say i create a polyline, lets say its 15 inches long. I used to be able to click on it and have the length show up in my properties. it no longer does that.
2) Lets say i create a polyline, it's green and has a dot pattern. I decided i wanted to change it to yellow and hidden pattern. I can no longer select the line and change it under the properties, it will change it in properties, but not on my screen. then when i draw a new line it will be yellow and hidden. I end up having to matchprop to make it work.
