Another user has created a bunch of sketches and somehow has set the drawing up where all the viewport and our title block are displayed in white. model space everything is fine and is as it should be.
View 5 RepliesIn paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
Explain Autodesk's logic?
When working in a paperspace layout I am not able to move or re-size the default viewport. Upon selecting the viewport and attempting to move it I receive the following command line message: "1 was not in the working set." The viewport appears to be fixed and non-editible. What does the message mean? Would putting the viewport in the working set make it editable, and if so, how is this done?
View 2 Replies View RelatedAm using Autocad 2012 with SP2 downloaded, note the problem does not occur in Autocad 2013... So basically if you open the dwg you will see it opens in paperspace, the viewport is locked to a specific scale etc. Now go into model space where the dwg is, you should be able to zoom around, pan etc fine, problem is when you now go back into the layout or paperspace. You will notice that upon re-entering paperspace that the vport is highlighted, ie there is a thicker outline of the vport boundary, however am still in paperspace according to the tabs. When you now try zooming in or out using the mouse scroll you will notice an additional copy of the viewport is imprinted on the screen. Thats the problem. Doing a few undos will set you back right again.
So far we are inclined to think that its either something to do with the UCS or the units that the program is getting confused with but havent been able to find a solution. Also bear in mind that it seems to work fine in 2013. Its probably something really simple that we've missed but thought would try anyway Will attach the dwg file.
I am trying to plot a drawing with a viewport (of a 3D planview) in paperspace. The viewport has the "3D Hidden" shade plot property applied. The plot preview shows all the entities color-by-layer. I am plotting with a plot style that assigns all colors to black. Typically the plot preview shows all linework black when plotting with this plot style applied. The resulting plot (from an Oce tds700) shows the linework in a "grayscale" quality, not the normal solid black linework typically associated with a 2D viewport plotted on the same plotter with same plot style.
View 2 Replies View RelatedIs there a way to see and move paperspace viewport boundaries in model space?
Explaining: You have created layout which includes multiple viewports with different scale and size (view, section). Now you copy the layout to create a new layout with with same viewports. Now you have to change the view in all viewports. I have used technique where you double-click in viewport and you navigate in modelspace (pan/zoom) until you reach the right position.
The problem is If you have like 100 layouts with 10 viewports each, it takes very long time to pan the views into right position.
I have a some theories:
1. If I could see the viewports in modelspace, I could drag them all into right position without navigating them one-by-on in paperspace.
2. If I could pan the view in viewport by specific amount lets say 10m to the right.
As soon as you double click on a viewport in paper space - cad just craps it self and i have to control-alt-delelte.
Is it this lame HP Z200 workstation.
or is there a way to disable this command so when i accidentally double click it doesn't crash.
Is there a way to "disable" the display of the viewport "outline" so that it is not seen when looking at the paper space tab on a computer screen? Kind of like how images have frames but you can "hide" them.
View 4 Replies View RelatedI have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
Viewport. I have scaled the viewport to 1/16 in paperspace, but the drawing is to large and does not fit in the viewport I need to zoom in to make it fit.
View 4 Replies View RelatedI am trying to create a named viewport in paperspace and have to off selected layer only in selected view port. I Know to do this manually, but i don't get any idea for doing this using .net.
View 4 Replies View RelatedI need to rotate a view through a viewport in paperspace and tried to use the mvsetup command but LT doesn't recognize that command. How I can do it?
View 5 Replies View RelatedI was in paperspace, clicked in the viewport to do something in model space and a compass with north south east and west showed up in the top right corner of my viewport. When I clicked on it, my x-ref rotated. How in the world do I re create this? I have no clue how I even accessed it or what command prompted this to happen.
View 4 Replies View RelatedIn paperspace, each time I double click inside the viewport it automatically zooms to the extents of my drawing, changing the scale. Also, when I switch back to model space i am zoomed to extents in model space. How can I fix this?
View 2 Replies View Relatedissue I'm having in my plot files. The way our office sets up our drawings is that we have a set of base files (which is where we do all our plans and details, etc), and then those drawings get xrefed into a different files located in a "plot" folder that that has our titleblock and viewports of the xrefed base files.
The problem is that the plot files have started to NOT save any of my layer states that are associated with the base files. For example, I have a base floor plan that has demolition, construction, RCP layer states that are toggled with LMAN. But if I open the plot file for the RCP and set up the viewports so only the RCP layers are visible...the next time I open the drawing the RCP layer state is abandoned...now ALL the layers are on and I need to redo the viewport layer states...
why the text and leaders placed over viewports (in paperspace) keeps disappearing? The text is still there...just not visible. i can select the text with no problem. and if i move it off of the viewport then i can see it just fine. this is happening with all the viewports in my drawings... on all tabs. If i close the drawing and reopen then all the text appears again.....but when i switch tabs then come back...the text vanishes again.
View 2 Replies View RelatedI recently had to reload my Autocad and in doing so I now see all the coloured lines inside the viewport in paperspace. Previously these lines were in black, how can I return the viewport to that setting.
View 9 Replies View RelatedI am working on a rendering on vanilla AutoCad 2013, and I am getting frustrated with having to reset my viewport to the named view every time I move my camera.
I know that when you create a viewport you can call up a named view, but is there any way to link it permanently?
I just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies View RelatedAfter closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedA file created over a year ago (I believe with AutoCAD 2010) is needing to be updated. I have AutoCAD 2012 and when I open it there is no text in my Paper Space. However, if my manager is to open the same exact file with his AutoCAD 2012 he can clearly see all of the text is still in place. Is there a setting somewhere that I have missed that may be making the text not show up? All layers are on and visible.
View 5 Replies View RelatedWhilst dimensioning in paperspace I dont seem to be able to get the dimesions to sit above the drawing in model space. for example if I place a leader across the drawing to a specific point the leader sits under the drawing and is lost/hidden. how I set the dimensions to sit above the drawing.
View 1 Replies View RelatedWhen I make a layout with a part of my drawing in a viewport, I switch over to paperspace to draw dimension lines in it. Although the layout is displayed in another scale (e.g. 1:100) it puts the right dimensions at the drawing.
But now a problem appears:
With one of my drawings the layout does not put the right dimensions at the drawing in paperspace. I really don't know what went wrong. Strange dimensions appear, as if there must be a strange scale factor somewhere. (Dimlfac=1)
With standard CAD objects it is possible to control their display on a per viewport basis by using the layer manager and freezing any unwanted layers in a particular vport.
I'm having trouble controlling the display of FDO objects from an SDF file in the same way though.
We do a lot of labeling in paper space and have been encountering a problem with our dimension command mislabeling lengths and widths. Please see attached DWG. The road width should be 24' and its labeling it 880'. BUT measuring hoizontally it seemed to work fine. Really strange.
I am using the dimension command and snapping nearest and perpendicular. If I just click without using osnap it seems to work.
We tried using the DIM / DIMFLAC / V / and selectiong viewport
The funny thing is that I dont have this problem with every drawing. Just some seem to have this glitch.
I just installed the 2011 update (recomended). Now, on restart, all my butto icons are gone! The buttons are still active but I can't see them. They highlight when I roll over but the icon doesn't show up.
What can I do???
See att for printscreen
In the plot dialog box the options Plot paperspace last and Hide paperspace objects are only supposed to be available in Paperspace however they show up as checked in some of our drawings when plotting from Modelspace. They should be greyed out then. (see attached) If I copy/paste all objects into a new drawing everything is fine. If I delete all layout tabs the options are still checked when plotting in model space.
The only thing I can figure is there are paperspace entities in my model space or that somehow paperspace is leaking through into modelspace.
I'm having an issue with viewports in a drawing not displaying the color of the objects in model space. All of the objects are set to display bylayer, and all of the viewport overrides in the drawing are off. Still, the objects will only display as either white or grey through the viewport, even though the colors show up fine in model space. I've also tried making a new viewport and it also displays everything as either white or gray, so I'm thinking it might be some kind of system variable that I don't know about.
View 2 Replies View RelatedI dont use paper space at all. i mostly work in model. but i just want to explore the paper space side.
I have my lpaperspace dimscale set at 1
In the model space my picture is drawn to scale, so its like 12 feet tall.
when i put the viewport in and get the picture positioned in the viewport, when i dimension the model in the viewport my dims are set according to the paperspace dimscale.
is there a way i set the dimscale in the viewport at a different dimsale then the dimscale set in the paperspace without having to set the dimscale in the model space?
See the attached JPEG files for a viewable explanation.
Dimensions placed in paperspace that are scaled by the viewports, change on their own. This happens at no apparent frequency. And for no apparent reason.
This has happened after I've saved a drawing and reopened. Also has happened when I've moved or stretched a viewport.
Currently I am using Autocad 2012, but this has been happening for some years.
Modeling 1:1 in MS, dimensioning in PS different scaled viewports. Plotted from PS, did further work both in MS/PS and notice dimension readings have scaled up by 99.98% and 100% to what they were in hard copy. Changed dims in properties but for some reason they have reverted back to the percentage increase? For example I have a 5745mm truss span that is now a 574.5 meter spanning truss!!?? Haven’t altered dimstyle at all or any scalings. Laid another dimension again in PS along side the exaggerated one using same endpoints in order to check things and it’s fine.
Would like to know what has caused the dims to scale up in PS and, how to undo the problem, hoping not to have to re-dimension.
Attached is the dwg. and yes, I have dimensioned in MS but there was a reason. It’s PS that’s causing the grief.