I recently had to reload my Autocad and in doing so I now see all the coloured lines inside the viewport in paperspace. Previously these lines were in black, how can I return the viewport to that setting.
View 9 RepliesI have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
Viewport. I have scaled the viewport to 1/16 in paperspace, but the drawing is to large and does not fit in the viewport I need to zoom in to make it fit.
View 4 Replies View RelatedIn paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
Explain Autodesk's logic?
I am trying to create a named viewport in paperspace and have to off selected layer only in selected view port. I Know to do this manually, but i don't get any idea for doing this using .net.
View 4 Replies View RelatedAnother user has created a bunch of sketches and somehow has set the drawing up where all the viewport and our title block are displayed in white. model space everything is fine and is as it should be.
View 5 Replies View RelatedWhen working in a paperspace layout I am not able to move or re-size the default viewport. Upon selecting the viewport and attempting to move it I receive the following command line message: "1 was not in the working set." The viewport appears to be fixed and non-editible. What does the message mean? Would putting the viewport in the working set make it editable, and if so, how is this done?
View 2 Replies View RelatedI need to rotate a view through a viewport in paperspace and tried to use the mvsetup command but LT doesn't recognize that command. How I can do it?
View 5 Replies View Relatedthe grey or coloured lines on screen are plot in black, even in the pdf preview. How can I obtain the chosen colours?
View 3 Replies View RelatedAm using Autocad 2012 with SP2 downloaded, note the problem does not occur in Autocad 2013... So basically if you open the dwg you will see it opens in paperspace, the viewport is locked to a specific scale etc. Now go into model space where the dwg is, you should be able to zoom around, pan etc fine, problem is when you now go back into the layout or paperspace. You will notice that upon re-entering paperspace that the vport is highlighted, ie there is a thicker outline of the vport boundary, however am still in paperspace according to the tabs. When you now try zooming in or out using the mouse scroll you will notice an additional copy of the viewport is imprinted on the screen. Thats the problem. Doing a few undos will set you back right again.
So far we are inclined to think that its either something to do with the UCS or the units that the program is getting confused with but havent been able to find a solution. Also bear in mind that it seems to work fine in 2013. Its probably something really simple that we've missed but thought would try anyway Will attach the dwg file.
I was in paperspace, clicked in the viewport to do something in model space and a compass with north south east and west showed up in the top right corner of my viewport. When I clicked on it, my x-ref rotated. How in the world do I re create this? I have no clue how I even accessed it or what command prompted this to happen.
View 4 Replies View RelatedIn paperspace, each time I double click inside the viewport it automatically zooms to the extents of my drawing, changing the scale. Also, when I switch back to model space i am zoomed to extents in model space. How can I fix this?
View 2 Replies View Relatedissue I'm having in my plot files. The way our office sets up our drawings is that we have a set of base files (which is where we do all our plans and details, etc), and then those drawings get xrefed into a different files located in a "plot" folder that that has our titleblock and viewports of the xrefed base files.
The problem is that the plot files have started to NOT save any of my layer states that are associated with the base files. For example, I have a base floor plan that has demolition, construction, RCP layer states that are toggled with LMAN. But if I open the plot file for the RCP and set up the viewports so only the RCP layers are visible...the next time I open the drawing the RCP layer state is abandoned...now ALL the layers are on and I need to redo the viewport layer states...
I am trying to plot a drawing with a viewport (of a 3D planview) in paperspace. The viewport has the "3D Hidden" shade plot property applied. The plot preview shows all the entities color-by-layer. I am plotting with a plot style that assigns all colors to black. Typically the plot preview shows all linework black when plotting with this plot style applied. The resulting plot (from an Oce tds700) shows the linework in a "grayscale" quality, not the normal solid black linework typically associated with a 2D viewport plotted on the same plotter with same plot style.
View 2 Replies View RelatedIs there a way to see and move paperspace viewport boundaries in model space?
Explaining: You have created layout which includes multiple viewports with different scale and size (view, section). Now you copy the layout to create a new layout with with same viewports. Now you have to change the view in all viewports. I have used technique where you double-click in viewport and you navigate in modelspace (pan/zoom) until you reach the right position.
The problem is If you have like 100 layouts with 10 viewports each, it takes very long time to pan the views into right position.
I have a some theories:
1. If I could see the viewports in modelspace, I could drag them all into right position without navigating them one-by-on in paperspace.
2. If I could pan the view in viewport by specific amount lets say 10m to the right.
why the text and leaders placed over viewports (in paperspace) keeps disappearing? The text is still there...just not visible. i can select the text with no problem. and if i move it off of the viewport then i can see it just fine. this is happening with all the viewports in my drawings... on all tabs. If i close the drawing and reopen then all the text appears again.....but when i switch tabs then come back...the text vanishes again.
View 2 Replies View Relatedwhy using the line tool, that small divider lines to divide text style links disappear when I save the page? Is there a better way to make colored lines?
View 3 Replies View RelatedI am working on a rendering on vanilla AutoCad 2013, and I am getting frustrated with having to reset my viewport to the named view every time I move my camera.
I know that when you create a viewport you can call up a named view, but is there any way to link it permanently?
As soon as you double click on a viewport in paper space - cad just craps it self and i have to control-alt-delelte.
Is it this lame HP Z200 workstation.
or is there a way to disable this command so when i accidentally double click it doesn't crash.
In our company we currently model using coloured lines rather than the Revit desired black/white but we are more and more being asked to print the odd view on a sheet with coloured lines or a coloured 3d view.
As some of us have grown up on th edrawing board through to Revit we are so used to the coloured lines and feel that it gives the drawing depth and is so much easier to understand.
I have been trying every way to keep the coloured linies but using view templates. filters and phasing to enable me to change views quickly from coloured to black and then back but there is no easy quick transition especially as we can't use these to change standard linetypes.
Why Autodesk have made this such a difficult issue within revit... Now we can model in 3D, create schedules automatic yet Autocad is much better for plotting...
When I make a selection in a picture, the selection dotted line shows a coloured border, which is the colour of the second choice in the Materials palette. Especially if I make an addition to the selection, this coloured line runs right through the selected figure. If I copy the selection, undo the selection and then paste as a new layer, the coloured border, especially in added areas, remains visible.
how I can get rid of this strange artifact? I didn't use to have it, it emerged a few days ago.
I'm using autocad for mac. I've just saved a pdf in illustrator as an autocad dwg and opened it in autocad. It shows up but is not visible in my paperspace.
I've made sure it's on in the viewport. I've even tried to plot from modelspace but the lines don't show up in the plot. They are visible in the modelspace. They have all imported on the same layer, though some are different colour - some of them do show up, but not many.
lts.jpg what is the LTS scale factor or value to set at for paper space scale 1/8"=1'?, the hidden lines show on Model space but one paper space they show as continious lines, this is not the first time that i came across this issue. (note: when i typed LTS in CAD it said ENTER NEW Lts scale factor <240>
View 9 Replies View RelatedI have made a landscape model in meters as units in the modeling area. Now, when I want to scale the drawing in the paper layouts, within the viewport, it seems to me like it's scaling as if the drawing was done with millimeters as units.
I think this might have been caused by me starting to draw, thinking I was plotting in with meters as the unit, but then found that it was set as millimeters. I changed the unit setting for the model to meters and that seemed to work fine. But I'm guessing it didn't work.
I have tried using the INSUNIT command and it says the drawing is in 6, which is meters, so why is it scaling as if it was in millimeters on an A3 layout?
I just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies View RelatedHaving trouble with diameter and radial dimensions since upgrading to 2013.
For example, draw two concentric circles and Presspull (or Extrude and Subtract) so that you get a hollow cylinder. Then create a viewport of this solid in a layout, and try to dimension the inside and outside diameters.
One of the two dimensions will work properly (seems to vary which one). The other will magically "jump" when placed (ex. the OD dimension will jump and become the ID, or vice versa).
How to resolve this? Our guys are having to do absurd things like redrawing the circle in paper space and dimensioning to it with a scale factor. Is this some sort of 2013 bug, or a setting?
Inventor 2013
Windows 7 64 Bit
When creating cross section views ("Home>Section Views>Create Multiple Views"), my sections are being placed at the exact boundary of the viewport (viewport is per my template).
Surely there's a way to create a margin inside the viewport.
Here's a screen shot of what I'm seeing. Notice how the dotted "Plot Area Boundary line is going right thru the left axis labels and on top of the bottom axis blue line (which means the bottom axis labels will NOT be seen).
my ucs keeps moving when i try to pan inside my viewport and it doesnt allow me to pan my drawing.
View 1 Replies View RelatedThere are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
I started a drawing for a project, and so far I don't have much information in the drawing. I created a few objects, then went to one of my Layout pages and created a viewport to view the objects, and bam - some of the lines are missing (the yellow objects). As you can see on the screen grabs, I hovered over the Model tab to prove they're still there. Even when I double-click inside the viewport to edit through it and try to grab the objects, they're apparently gone. But they're not, they show up in the Model tab.
The layer they're on is turned on, thawed, and unlocked, but every object in that layer is missing when I leave the Model tab. I've opened viewports on other Layout pages, and they all refuse to show the yellow lines.
I have got a large drawing with multiple viewports and some layers that are shown in model space won't show when I access model space from paper space (through the viewport). I have had a look at the layer manager through the viewport and everything is switched on, there is no viewport freeze activated but still I can't see the lines in the viewport in paper space (either in model or paperthrough the template).
View 8 Replies View Related