AutoCAD Civil 3D :: Paperspace Text Over Viewport Disappears?
Dec 5, 2012
why the text and leaders placed over viewports (in paperspace) keeps disappearing? The text is still there...just not visible. i can select the text with no problem. and if i move it off of the viewport then i can see it just fine. this is happening with all the viewports in my drawings... on all tabs. If i close the drawing and reopen then all the text appears again.....but when i switch tabs then come back...the text vanishes again.
View 2 Replies
ADVERTISEMENT
Jul 10, 2013
In paperspace, each time I double click inside the viewport it automatically zooms to the extents of my drawing, changing the scale. Also, when I switch back to model space i am zoomed to extents in model space. How can I fix this?
View 2 Replies
View Related
Feb 8, 2013
I have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
View 9 Replies
View Related
Feb 12, 2010
I am having trouble with getting certain pieces of text to show up in my viewport in paperspace. There is text and linework on the same layer. However, only the linework shows up in paperspace, not the text. I have seen this before and don't remember how to fix it. It is a setting somewhere but I don't remember where.
View 7 Replies
View Related
May 30, 2013
Viewport. I have scaled the viewport to 1/16 in paperspace, but the drawing is to large and does not fit in the viewport I need to zoom in to make it fit.
View 4 Replies
View Related
Feb 14, 2013
In paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
Explain Autodesk's logic?
View 1 Replies
View Related
Mar 29, 2012
I am trying to create a named viewport in paperspace and have to off selected layer only in selected view port. I Know to do this manually, but i don't get any idea for doing this using .net.
View 4 Replies
View Related
Jun 21, 2012
Another user has created a bunch of sketches and somehow has set the drawing up where all the viewport and our title block are displayed in white. model space everything is fine and is as it should be.
View 5 Replies
View Related
Dec 4, 2012
When working in a paperspace layout I am not able to move or re-size the default viewport. Upon selecting the viewport and attempting to move it I receive the following command line message: "1 was not in the working set." The viewport appears to be fixed and non-editible. What does the message mean? Would putting the viewport in the working set make it editable, and if so, how is this done?
View 2 Replies
View Related
Oct 27, 2011
I need to rotate a view through a viewport in paperspace and tried to use the mvsetup command but LT doesn't recognize that command. How I can do it?
View 5 Replies
View Related
Jul 9, 2012
Am using Autocad 2012 with SP2 downloaded, note the problem does not occur in Autocad 2013... So basically if you open the dwg you will see it opens in paperspace, the viewport is locked to a specific scale etc. Now go into model space where the dwg is, you should be able to zoom around, pan etc fine, problem is when you now go back into the layout or paperspace. You will notice that upon re-entering paperspace that the vport is highlighted, ie there is a thicker outline of the vport boundary, however am still in paperspace according to the tabs. When you now try zooming in or out using the mouse scroll you will notice an additional copy of the viewport is imprinted on the screen. Thats the problem. Doing a few undos will set you back right again.
So far we are inclined to think that its either something to do with the UCS or the units that the program is getting confused with but havent been able to find a solution. Also bear in mind that it seems to work fine in 2013. Its probably something really simple that we've missed but thought would try anyway Will attach the dwg file.
View 2 Replies
View Related
Nov 10, 2011
I was in paperspace, clicked in the viewport to do something in model space and a compass with north south east and west showed up in the top right corner of my viewport. When I clicked on it, my x-ref rotated. How in the world do I re create this? I have no clue how I even accessed it or what command prompted this to happen.
View 4 Replies
View Related
Dec 12, 2011
issue I'm having in my plot files. The way our office sets up our drawings is that we have a set of base files (which is where we do all our plans and details, etc), and then those drawings get xrefed into a different files located in a "plot" folder that that has our titleblock and viewports of the xrefed base files.
The problem is that the plot files have started to NOT save any of my layer states that are associated with the base files. For example, I have a base floor plan that has demolition, construction, RCP layer states that are toggled with LMAN. But if I open the plot file for the RCP and set up the viewports so only the RCP layers are visible...the next time I open the drawing the RCP layer state is abandoned...now ALL the layers are on and I need to redo the viewport layer states...
View 1 Replies
View Related
Jan 10, 2012
I am trying to plot a drawing with a viewport (of a 3D planview) in paperspace. The viewport has the "3D Hidden" shade plot property applied. The plot preview shows all the entities color-by-layer. I am plotting with a plot style that assigns all colors to black. Typically the plot preview shows all linework black when plotting with this plot style applied. The resulting plot (from an Oce tds700) shows the linework in a "grayscale" quality, not the normal solid black linework typically associated with a 2D viewport plotted on the same plotter with same plot style.
View 2 Replies
View Related
Jul 26, 2012
Is there a way to see and move paperspace viewport boundaries in model space?
Explaining: You have created layout which includes multiple viewports with different scale and size (view, section). Now you copy the layout to create a new layout with with same viewports. Now you have to change the view in all viewports. I have used technique where you double-click in viewport and you navigate in modelspace (pan/zoom) until you reach the right position.
The problem is If you have like 100 layouts with 10 viewports each, it takes very long time to pan the views into right position.
I have a some theories:
1. If I could see the viewports in modelspace, I could drag them all into right position without navigating them one-by-on in paperspace.
2. If I could pan the view in viewport by specific amount lets say 10m to the right.
View 2 Replies
View Related
Mar 8, 2013
I recently had to reload my Autocad and in doing so I now see all the coloured lines inside the viewport in paperspace. Previously these lines were in black, how can I return the viewport to that setting.
View 9 Replies
View Related
Nov 21, 2012
I am working on a rendering on vanilla AutoCad 2013, and I am getting frustrated with having to reset my viewport to the named view every time I move my camera.
I know that when you create a viewport you can call up a named view, but is there any way to link it permanently?
View 2 Replies
View Related
Feb 21, 2012
As soon as you double click on a viewport in paper space - cad just craps it self and i have to control-alt-delelte.
Is it this lame HP Z200 workstation.
or is there a way to disable this command so when i accidentally double click it doesn't crash.
View 3 Replies
View Related
Jun 19, 2012
Viewport lag is not connected with graphics card driver. 3ds max 2012 has well known issue - Viewport lag- 1-2 seconds every time using middle mouse orbit/pan.
When You use alt+z or pan tool there is no lag.I have tried disabling wacom hid devices, disabling tablet pc features, changing group policy management, disabling display drivers... and much more. nothing is working.how to map orbit to the middle mouse button by some other command.
i have dual quadcore xeon, not the 6-core one.Also for sure it is not 3ds max issue. windows is a pice of garbage thet inteferes with max. something wrong is going with the middle mouse button.
View 1 Replies
View Related
Feb 4, 2013
In paperspace the text are so out of scale and it only shows a specific area of the model view.the other viewports will have a realistic and 2d wireframe.
View 5 Replies
View Related
Nov 7, 2012
I have a drawing that is 50 scale. However my sections are all 10 scale. When I set my viewport to 10 scale, all my text is tiny. I can go into the style of the section view and change the size, but then it's too large in model space. Nothing I've tried will change the size of my text in paperspace.
Win 7 64BIT
C3D 2013
View 8 Replies
View Related
Jul 19, 2013
This is issue arises when i have been working on a drawing for a while with multiple xref/data shortcuts. The model space text is all the correct size yet once I enter a layout the annotative text relating to 3D elements such as Alignments/Profile Station/Elevation Labels shrink to 1/25 their size. Other annotative objects such as Mtext and Multileaders are not effected. Attached are before and after pictures.
View 4 Replies
View Related
May 21, 2013
The viewport canvas is a great tool, I have had it working in previous versions of max but in 2013 I just can't get it to work.
The object it's self has been unwrapped and collapsed to poly no different to what I've done in the past. I bring up the viewport canvas dialog box and everything is normal until I select the paint brush tool and the object disappears, it's still in the scene but I just can't see it, it seems as though the viewport clipping has become very narrow, closing the dialog box the object returns. I've tried large and small objects, nitrous and direct x, and nothing seems to work.
View 2 Replies
View Related
Sep 23, 2010
We are using Civil 3D 2010, Version 4.1 and it is being used on both WinXP and Win7.
This is an issue that has been coming up at different times with profile views and them shifting when viewed from our viewports in our layout tab. It looks correct in the model space. But it shifts to the right 10' in the layout tab. We have 7 tabs in this drawing. I have looked through all of the profile view settings and it does not seem like any of these are the issue. I created a new viewport in the same tab and received the same shift to the right. I then created a new tab in the same drawing (not copied from the one that has the issue), created a new viewport, and the shift is not there. The PSLTSCALE, MSLTSCALE, and LTSCALE are all set to 1 in all of th tabs.
Woudl there be a layout tab setting that is causing this? This is happening on all of our machines with this drawing so I know it is not a specific user/machine issue. I have attached a .pdf showing the three cases described above if that were to provide any additional insight.
View 9 Replies
View Related
Sep 12, 2012
I'm adding a reference system grid to my paper space viewport. The default text format for the military grid reference system is almost perfect, except for the figures that are superscripted (see attached figure) - which I would prefer are aligned on the same baseline as the larger text, but still at the smaller size. Is there a way to customise the text format so that the reference system remains dynamic, but I get the exact format I want?
View 2 Replies
View Related
Nov 20, 2012
I just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies
View Related
Jul 25, 2012
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies
View Related
Jul 12, 2012
I have a drawing with a viewport that fits to the page. And I created another smaller viewport over top that just shows the legend. Now when I try to double click inside the smaller viewport it always goes into the larger one. I have tried bringing the smaller one to the front but that didn't work. I know that I can clip the larger viewport around the smaller one or bring the legend right into paperspace or slid the smaller one off to the side work in it and slide it back. This is more out of curiosity of how to get into the smaller viewport.
View 2 Replies
View Related
Feb 13, 2012
(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?
I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.
How can I control this setting?
I need to show this “leader” all the time. Is that possible?
Please, have a look on the screenshots below (the file is attached).
View 1 Replies
View Related
Feb 27, 2012
A file created over a year ago (I believe with AutoCAD 2010) is needing to be updated. I have AutoCAD 2012 and when I open it there is no text in my Paper Space. However, if my manager is to open the same exact file with his AutoCAD 2012 he can clearly see all of the text is still in place. Is there a setting somewhere that I have missed that may be making the text not show up? All layers are on and visible.
View 5 Replies
View Related
Oct 18, 2013
I have been having a problem with text visable in the modelspace not being shown in the paperspace. I have tried changing layer settings to no avail.
View 2 Replies
View Related
