I want to display the network server name automatically (preferably using a diesel expression).
I currently use diesel expressions to show the saved path and drawing name, but since we have a multitude of servers I'd like to show the server name as well. At the minute it just shows the network map name, i.e. N:, but I'd like to prefix that with the actual serve name, i.e. SERV-FILE-1 (or something like that).
I have been using survey database with the working folder set to the project location on our Z:. It was working fine until I come into work this morning and I can no longer open survey databases on the server. I can set the working folder and I can create new databases on the server but I cannot access them. Moving the working folder to a local drive fixes everything.
View 1 Replies View RelatedIllustrator doens't show my added network locations. Trying to open files from Bridge (or from InDesign) into illustrator results into illustrator opening, but not the file.
The 32-bit version of illustrator does show the network locations.
Running windows 8.1 and Adobe Creative Suite 6
Put together a pressure network and actually plotted it out for a project? Are the fittings and appurtenances even readable? I have a network setup on 40 scale plans and when plotted out, you can't even tell what a recuder is compared to a valve. Tees are obvious but thats only because of the branch pipe coming off of it. Our company uses the old basic symbols that are blown up big enough that dimensionally, they are not correct but visually they look really nice.
View 9 Replies View RelatedWhen I click on a section view and go up to the ribbon to "samplr more sources", my pressure network in not in the list to add.
View 1 Replies View RelatedI can create labels to display stationing in a profile, but is there a way to display the coordinates in the profile instead? When I need to move my pipes I am using the station I get from the profile label and then use grip move. If I could get the N, E, I could just type it in on the Vista table.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
I am new to using Tool Palettes. I have created a folder on my C: drive which contains all my tool palettes. Right now, I get the symbol of a circle with a line drawn through it and cannot use my tool palettes.
In the Options tab, I noticed that there are the "Tool Palettes File Locations" and also "Authoring Palette File Locations". What is the difference between the two? Do I need to do something to both so I can use my tool palettes without difficulty?
How to convert standalone installation of AutoCAD 2010 to network one without uninstalling the existing standlone version.
View 9 Replies View RelatedI am having problems with the display of my structures in a profile view. Previously, when I change the inverts of the pipes connected to my structure it would automatically adjust the bottom (sump) of the box invert to match my lowest pipe. However, for some reason it has stopped doing it and is now displaying the sump invert incorrectly. I have my style set to "Display as a Boundary". I have edited the structure sump to be by both elevation and depth, but it does not update the sump elevation. I have tried to grip edit the sump but it seems to be locked at a certain elevation. I have a profile with 10+ structures and they are all at multiple depths. I realize there are minimum depths allowed by the structure, but I have exceeded the minimum depths in all cases. Attached is an image that depicts my problem. No matter what I do to change the depth it stays locked at a certain elevation.
Civil 3D 2011, SP1
After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedAfter a recent installation of updates I now have the drawing network path being plotted on every drawing and plotter used. How can I disable this?
View 1 Replies View RelatedWe are a small company with two PCs - 1 laptop and a server. We are having problems using xref drawings across the network. The laptop is mapped to the Z drive and the reference file is on the server (D drive). Each time we open a drawing on the laptop (Z drive) the xref files which is saved on the server (D drive) cannot be seen. We reattached the file and it works fine until we closed and reopen the drawing. When the drawing is opened on the laptop the xref is not loaded on the screen. However, the file extension can be seen but no drawing is visible.
In summary how can we tell get the laptop to permanently reference xref files saved on the server without them dropping out?
I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?
View 9 Replies View RelatedI am running AutoCAD MEP 2012. I am unable to open drawings that are stored on a network drive. I continue to get a "Unhandled Access Violation Reading 0X0000 Exception at f5bfaad0h" and AutoCAD closes. If I copy that same file to the computer and make it local, it opens without any problem. All files local open just fine. Also, I am able to open the same drawing on the network from multiple other computers.
I have tried to repair AutoCAD and check all network settings on the computer, but everything appears correct.
I've installed the LM Tools license manager on a network server to distribute out floating license of AutoCAD 2010. The network license currently has 5 floating licenses for AutoCAD 2010. When I try and install the AutoCAD 2010 software on a client machine and go under "Install Tools and Utilities" I expect to see a choice for the Network License Activation Utility. Unfortunately all I get is the options to install the License Manager (LM Tools), CAD Manager Tools, and SAMreport-Lite. Nothing indicating an Activation Utility.
I may just be very oblivious but I'm not sure how to activate the program with the license server when I can't install the utility to do so. Am I missing a step somewhere? I have a feeling the answer is very obvious but I unfortunately can't see it. The SN and Product Key are entered correctly and should reflect the type of license(s) they are.
I have a couple of floating licenses for an old inventor series 11 product. The license server is down and I need to change these licenses back to standalone licenses. I tried uninstalling and reinstalling as standalone but it will not let me activate the software with the serial numbers on the back of the packaging.
View 2 Replies View RelatedWe have all of our job files stored on our network. If you open a sheetset from one of those network folders, it will open normally, you can view and scroll thru it normally, but the second you select / right click anything, it locks up cad (grey screen) and shows us the hourglass for 3-6 minutes, and then allows you to work with it, but with a 10-20 second delay on anything you try to do. If you copy the same job folder to the C Drive, and re-open the sheetset, it operates perfectly. Running a constant ping to our server returns a <0ms return with no lost packets.
View 1 Replies View RelatedCurrently, we have 3 stand alone license's and are wanting to reinstall AutoCAD 2012 for a network for various reasons. I uninstalled and installed the tools/utilities for a network license file however I just have our 3 stand alone licenses. Can I not use them in a file to be distributed by the server?
View 9 Replies View RelatedMy autocad 2012 installation runs slower when I have the network cable plugged in. This is very obvious when I run lisp commands.
I have a standalone installation with a drawing on a local drive, also SP1 is installed.
Is there a way for xrefs to stay attached to a drawing file when using Dropbox as a network? All files are saved to the dropbox which is loaded on both computers that need to access the files. If I do work and save an xref in a file that is then opened by someone else on a different computer, the xref is not loaded and has to be re-routed. Is there a way to avoid having to reroute xrefs everytime someone different opens the file?
View 2 Replies View RelatedI am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).
For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.
The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.
While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?
P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost
"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."
I'm trying to import a pdf underlay in AutoCAD 2012. However, every time I have imported it, the frame of the underlay shows up, but the pdf itself doesn't show up.
Contrast = 100
Fade = 0
Monochrome = No
Show underlay = Yes
Path is correct
I've tried importing image underlays (PNG files), and they work fine. Also, the pdf file is pretty big (about 100 MB), so I didn't know if that affected its ability to display. How to get this to show up?
How do I get rid of this "pin point" in my display. It shows up when displaying an isometric or perspective view. I would like to make a nice screenshot without it. There must be a variable somewhere?
View 2 Replies View RelatedI have big problem with Text in AutoCAD drawings. Text is missing and I can't write in new drawings as well. We have different systems xp x 64, xp x84 , windiows 7 x64 and windows 7 x 84. Different AutoCAD’s: 2010 2011,2012 and the same problem. The problem occurs in many files, so not only in this one. When text bloc don’t work it showing every time, when we want to write, on down ribbon “** Undefined symbol 101 and 102 ...” . When we want to open stiles for text AutoCAD Mechanical have critical error: “Unhandled Access Violation Reading 0x0000 Exception at e0533c85h” and closed. We have different computers with different graphical cards. We installed already SP 2 for 2012 and other versions are too upgraded. It looks like this problem isn’t connected with hardware. We are using local licenses. You can see this problem on attached pictures.
View 9 Replies View RelatedWindows 7 Enterprise SP1 - AutoCad 2011 - Current Microsoft Patches - Office 2010
I can get Gotham .OTF fonts working ok in Adobe applications (Photoshop, Illustrator), Microsoft Office Applications (Word, Excel, Outlook) and Archicad. But I cannot get the Gotham fonts to appear in AutoCAD. Do I specifically require .TTF files for the fonts to work correctly in AutoCad?
Attempted .TTF conversion that only wanted to replace the existing .OTF via Control Panel-Fonts...Uninstalled KB2753842 that seemed to be a forum topic of cinversation
I assume it's just my autocad display but I can never tell if lines and are drawn correctly or not. I'll draw construction lines and circles and grip edit my linework to snap to the end points and arc midpoints perpindicular to the circle but there are still overlapping displays. In the attached image I've snapped to arc points to the circle and the edges of the hatch to the extension/intersection of them and this is how it still displays.
Yes, I am constantly regenning and my arc smoothness is set to 10000.
I suddenly am having a problem viewing underlays. It happens with PDF Files and DWF Files. When I insert the file nothing is displayed. I dont see a frame or an image. All I get is a point. When I select the point the underlay ribbon bar comes up. I have the show underlay selected. The Fade is Set to 0, In properties I can the layer is set to 0, but under view the height and width is all 0.00000.
I am running straight Autocad 2012 w/ SP1. Its 64 bit on Windows 7.
have a problem with the display of my constraints
after i uncheck the "show all dynamic constraints"
all the dimensional constraints stay invisible even i re check the show all
i can find a way to turn the visibility of the dimensional constraint on
Product Design Suite 2013
If I insert a pdf underlay into a drawing, it won't display or print out. I know a pdf has been inserted as I can use Erase-All and it will say an object has been selected. The funny thing is that it all worked fine a week ago, and now doesn't. I can open a drawing done months ago which was fine but now there is no pdf displayed.
I've checked various settings against another computer and they are the same.
I am having a problem with a bunch of existing drawings. The drawings displayed fine with Autocad 2009 but with 2010 the blocks have huge rectangles drawn around them. (so big they extend off the title block) We have a few machines running older versions and the drawings display fine but any machine with 2010 all displays these boxes.
View 5 Replies View RelatedI have a question on the display of the layers in the layer-pulldown. I have a client that is having problems with the display of his layers in the pull-down. They are not in alpha order. When he opened the dialog box they are listed correctly - what can cause this?
View 4 Replies View Related
