AutoCAD Civil 3D :: Display Pressure Network In Cross Sections?
Jan 22, 2013When I click on a section view and go up to the ribbon to "samplr more sources", my pressure network in not in the list to add.
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Display 3D Polyline In Cross Sections
Nov 21, 2013I am working on a project which has numerous existing conduits laid out on the site. The location of the services has be picked up by a surveyor on the surface at numerous location and provided as a 2D polyline. The lines are quite long with a large number of nodes.
I wanted to represent the conduits as say a 100mm pipe and locate it about 0.6m below the surface to get an idea of how it impacts my works.
I tried converting it to a network fails as there is >70 nodes. I really only need to see the conduit on the cross section as I will definately avoid it.
Is there a way to display 3D polylines in cross sections?
AutoCAD Civil 3D :: Get Cross Sections To Display Cut / Fill Value?
Apr 17, 2012How do I get the cross sections to display a cut/fill value?
View 4 Replies View RelatedAutoCAD Civil 3D :: Pressure Network Fitting And Appurtenance Display
Sep 14, 2012Put together a pressure network and actually plotted it out for a project? Are the fittings and appurtenances even readable? I have a network setup on 40 scale plans and when plotted out, you can't even tell what a recuder is compared to a valve. Tees are obvious but thats only because of the branch pipe coming off of it. Our company uses the old basic symbols that are blown up big enough that dimensionally, they are not correct but visually they look really nice.
View 9 Replies View RelatedAutoCAD Civil 3D :: How To Set Up PVC Pressure Network
Apr 6, 2012After spending at least 15 minutes on this subject, I don't see an easy way to set up a PVC pressure network. Do we have to re-invent the wheel?
View 5 Replies View RelatedAutoCAD Civil 3D :: Pressure Network API
Mar 8, 2013I'd like to know if the Pressure Network API in Civil 3D 2013 have been exposed via .NET or COM.
View 2 Replies View RelatedAutoCAD Civil 3D :: Cut / Fill From Cross Sections
Feb 25, 2013I am working on a project for a park in which they are looking for a new access road and a parking lot. I created the road and sections for it, now im looking to get material cut/fill from the sections. I am having a tough time getting them to work. The only thing I can get to work is if i created a volume surface comparing my eg to my fg surface. That will give me a cut and fill material amount for my new road
What i am trying to get is the volume report for each sections, so i can get the cut/fill for each section. I have followed the tutorials and tried everything, but nothing seems to work. I created a surface from my corridor, and for some reason when i go to edit my materials, i cant add my proposed surface from my corridor to make the comparison from, and i think thats my problem. Everytime i go to create my volume report, i get all 0's.
AutoCAD Civil 3D :: Label Cross Sections
Jan 3, 2013When editing the Cross Section Styles the Horizontal Axis changes do not take affect. Vertical will work as entered.
See attached image.
I am changing under the Horizontal Axes tab, on the Section View Styles Menu.
AutoCAD Civil 3D :: Portrait Cross Sections Set Up
Mar 29, 2013I am trying to set up portrait cross sections. I can get my views to create a grid and such that look correct, however when putting them on sheets, it rotate the border, but also the modelspace. Are there certain settings in the sheet creation or the dwt file I need to review to do portrait sections?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
AutoCAD Civil 3D :: Xrefed Cross Sections
Feb 29, 2012I have created a drawing called xsec. I xrefed the corridor drawing into it and data shortcut the alignments in as well. I created sample lines and cut my cross sections in the drawing. Everything at this point looks fine.
The problem happens when I create a new drawing and xref the xsec into it. In this new drawing only the right side of my cross sections is showing up. I want to use this drawing for my sheet set rather than have a bunch of tabs in the xsec drawing.
AutoCAD Civil 3D :: Cross Sections All Laying On Top Of One Another
Jul 18, 2013had my cross sections ready to go all day, had to add points to my surface layer is all i did, now when i cut the sections they are all laying on top of one another.
View 6 Replies View RelatedAutoCAD Civil 3D :: Pressure Network Export
Sep 10, 2013Is there some way a person can export the pressure network in c3d 2014 to a 3d model (3ds,revit,IMX)? IThis can be done with the sewer network but no joy on the pressure network. I would really like to use Infrastructure modeller to assist in the design of our project.
I really like the new tool for pressure networks, but the fact that I cant export a 3d model.
AutoCAD Civil 3D :: Pressure Pipe Network
Jan 16, 2013I have created a pressure pipe network (Plan view) from own created pipes and fittings, try to create an alignment from the network but C3D tells me that the selected network part has no connected parts?
How would I connect the network in order to create an alignment? (the pipe network has got a command to do that)
AutoCAD Civil 3D :: Pressure Network Not Drawing
Jun 20, 2013I am trying to create a pressure network with 1.8m cover. I haven't created one before but I've read up and understand how to do it. I have created a new network and referenced it to a surface and alignment, using the default parts catalog, and changed cover to 1.8m. I pick pipes and bends or pipes only and start to draw. It asked for an insertion point and I click one and a blue line, attached to my insertion point, follows my curser. It asked for another point and I click in another place but when I click that second point the blue line disappears and a new one follows my curser attached to the new point I just clicked.
View 1 Replies View RelatedAutoCAD Civil 3D :: Material Shapes On Cross Sections?
Dec 19, 2012I've created sections and set up Materials List with Shapes Defined (Edit Material List.jpg) but the View Group Properties do not reflect this and have to be edited to suit.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: More Sampled Cross Sections Into Existing Ones?
Oct 10, 2012I sampled my sections at 25 feet intervals, created my section view group and them plotted my cross section sheets. All look fine.My problem is that I need to include Station 21+17.40 and some other similar stations (in-between the 25 feet intervals) into my cross section sheets without deleting the existing Sample Line Group and Section View Group. Is there a way I can sample my desired additional sections and add them to the existing Sample Line Group and Section View Group and re-plotted my cross sections?
View 1 Replies View RelatedAutoCAD Civil 3D :: Cross Sections With A Surface Mask
Feb 4, 2013We want to show two surfaces, an existing ground and a proposed ground, on a cross section. When the proposed ground meets up with existing ground, it would be nice for the line to end. With just existing ground continuing on. The surface is data referenced, and I would like to not break either of them. I thought adding a surface mask would cause the proposed surface to stop at the mask, but that doesn't appear to be the case.
View 2 Replies View RelatedAutoCAD Civil 3D :: Assembly Not Showing In Cross Sections
Jan 21, 2013I have everything needed for plotting of cross sections. Alignment, profile, assembly.
The "Corridor Section Editor" shows everything as it should be. Existing Ground, Final Grade, Labeling, etc. When "Create Multiple Views" or "Create Section View" only existing Ground shows. All layers are on.
AutoCAD Civil 3D :: Create Cross Sections From Existing DWG?
Jul 22, 2013civil3d 2012. I'm trying to find out how to create cross sections from existing ones that i have in autocad file. I allready have read for the way with offsets points, but is there a way to make full cross sections from the allready drawned?Is it possible to convert the existing lines?
View 7 Replies View RelatedAutoCAD Civil 3D :: Calculate Difference Between 2 Different Cross-sections?
Feb 5, 2013With reference to the picture attached, I am trying to find the overlapping area between two different cross-sections. I.e.the area of green minus the area of white.
The hard way to do it would be to sketch a closed polyline over the area I want but I have about 100 of these to do and more to come.
Windows 7 64-bit
Intel Core i7-3840QM 2.80GHz
NVIDIA Geforce GTX 680M 4GB
16GB RAM
AutoCAD Civil 3D :: Updating Cross Sections With New Surface?
Aug 7, 2012I have a drawing with some cross sections of road showing the Proposed road surface and Existing ground surface. Now we have received a new ground surface and we have to supersede the old ground surfae with the new one. is there any way to swap the surface in the existing cross sections?
View 5 Replies View RelatedAutoCAD Civil 3D :: Corridor Not Displaying On Cross Sections
Feb 28, 2013I have a corridor with 2 intersections. It is more or less like a main road with an off-ramp and an on-ramp, both on the same side, with a big triangle shape island in between them. It involves an existing road widening and a connection with another existing road. Since it is a real scenario, the intersections aren't perfect 90 degrees nor the offsets are constant.
Create Western intersection and change offset and curb return targets to design aligments.Create Eastern intersection and change offset and curb return targets to design alignments.Model the corridor as per design requirements.Due to design constraints, I ended up removing both intersections. I didn't delete all the offset and curb return alignments although they're not targeted on any region. Deleting this alignments seems to make C3D crash. the actual intersection definition hasn't been removed, as I read on other threads. I kept on getting a couple of error messages on Panorama Event Viewer every time I rebuild the corridor.
So, the problem comes when I try to output the cross sections from this nice looking corridor. They all look fine until they reach the intersection area. From the intersection onwards, the corridor is not displayed on any cross section. Even way passed the western intersection.
Why the corridor doesn't display on the cross sections passed the deleted intersections?I have a bad feeling that removing the intersection wasn't a good idea in the first place but it's too late now.
AutoCAD Civil 3D :: Hatch Between Surfaces On Cross Sections
Nov 25, 2013I have multiple surfaces representing topsoil, clay and types of bedrock, and an alignment set with sample lines and sections set. Trying to use the Compute Materials using material lists and the corresponding shape style to hatch between each surface something is going wrong. With all the display settings (Plan,Section,Profile,etc) set to by layer and on a created layer(not on 0). The shape area fill is set to solid. It will not display the hatch.
View 3 Replies View RelatedAutoCAD Civil 3D :: Pipe Networks In Cross Sections
Jul 24, 2012I am having an issue with the pipe networks drawing the pipes incorrectly in the cross sections. Whenever there is a crossing pipe running parallel with a structure, the pipe shows as a large ellipse instead of showing the pipe walls.
Some of the pipes are not running exactly parallel with the sample line, but they are pretty close. I know in the profile view you can change a setting to make a pipe show as a pipe end or as a regular pipe. Is there a setting for the cross sections as well? If not how do I get the pipes to show correctly?
AutoCAD Civil 3D :: Cross Sections (as Polylines) To Surface
Oct 30, 2012This looks like an interesting tool
[URL]....
(No connection with Autodesk other than using the products in the real world)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: Corridor Not Displaying On Cross Sections?
Aug 20, 2013Section editor shows the Existing Ground and the Assembly correctly. But "Create Multiple Views" Shows a blank Grid from -10 to 0..... Corridor rebuilt...
View 5 Replies View RelatedAutoCAD Civil 3D :: Pressure Network - Tee And Vertical Bend
Nov 2, 2013I am trying to add a 20"x6" tee to a 20" force main pressure pipe network and Civil 3D simply refuses to do it. It will cut the pipe, but won't add the tee in plan edit. When I try to add a tee to the end of a pipe, it doesn't show up. I can, however, add a 24"x6" tee to my 20" di pipe, which of course doesn't even make sense.
Also, I am having a problem with vertical bends in profile drawing correctly. It works fine when the profile is running left to right, but where I have to reverse the profile they cross over onto themselves (see attached png).
I find myself spending more time fiddling with the pressure network tool than it would take to just draw it manually.
AutoCAD Civil 3D :: Using Pay Items In Pressure Water Network?
Dec 26, 2013I'm trying to use pay items in a pressure water network I'm building.
I can't find a pay item that fits for the fittings.
Are fittings normally included in the LF of pipe or are they assigned their own pay item?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
AutoCAD Civil 3D :: Pressure Pipe Network In 2013?
Nov 20, 2013Using the Pressure Pipe Network in Civil3D 2013? I just recently began developing an Apputenace library for all the parts we use that were not included with the program. I have run into a few big issues that could prevent our firm from using this potentially useful tool. One issue, does the PPN posses the ability to create structures like manholes? This could be a really break point for using it to do a sewer line. Another, how well does it interact with multiple surfaces? If I have two surfaces butted up to one another how to a get a PPN from point A on surface 1 to point B on surface 2 and have that PPN respond at the correct bury depth while creating the correct fittings? As I experiment more this this tool I feel as if there are way more questions about what it can and can't do compared to what a regular pipe network does.
View 1 Replies View RelatedAutoCAD Civil 3D :: Pressure Pipe Network Can't Drawing
Dec 22, 2013I downloaded the C3D 2014, and trying it. When i discovered the new function, i try to draw a pressure pipe network.
After i was take the design, there is no any object in the model space. Nothing.
There are a full list of pipes and structures in the tool space tree menü. When i just click the network name and select it, i get all of information about the planned network but i can't see any object, lines or other in the model space. All layout viewable, What is the problem with it?
AutoCAD Civil 3D :: Corridor Not Fully Showing In Cross Sections?
Jul 30, 2012I have a corridor with two baselines, one on the south side of the road, and one on the north side. The south baseline appears correctly in the section view. It is an asphalt bike trail with a ditch to the left side. The north baseline was not appearing at all. The assembly was just a ditch with nothing else. I changed the north baseline to use the same assembly as the south to troubleshoot. The pavement comes in, but the ditch still does not appear.
I can see the ditch feature lines on my corridor (see attached), but they are not appearing in the section view.
