there is a command that allows for editing the actual line work in an object controlled by the Display System... it is a last resort command if you cannot get the object to display as you wish.What is it?
View 1 RepliesI want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedI'm electrical and have my own display set oddly enough named "electrical". When I set the display to "electrical" I can't osnap to endpoint or midpoint of smart walls in the background (nearest works fine). When I change the display to something else, generally it works.
Is there an "osnap" setting for displays?
Is there any to get the single line display into the medium or medium low rep by object? I see the only place to get it is to use the High Detail rep by object. Normally in a high detail would you not want a double line for doors? and use a single line for concept in the medium low? I would like to see the ability to have the single door in all display reps by object
View 4 Replies View RelatedI quickly created a roof and changed the view display to "sketchy". When I show the roof in top view diagonal lines are shown on the sloped surfaces. How do I get rid of them?
View 1 Replies View RelatedIs it possible to change the color of a line by changing the display configuration? If so, how?
View 3 Replies View RelatedI am having several problems with my xrefs. My two big problems are xrefs bringing in way more information than I want, and they are duplicating if they are selected, even when I have the xref layers locked.
My set up is this:
I have a plan file, a grid line file, an elevation file, and a section file.
I want all files to be referenced to each other. However, I do not want duplicates of any xref. For instance, in my section drawing, I will reference my plan file which consequently brings in any file that is referenced in the plan file. I know that I will get the circular reference warning and that I can click continue. However, is there any way I can just get "1 degree of nesting"?
Second, I cannot figure out how to lock my xrefs to prevent them from constantly being selected. My problem is that in my live drawing information, if I select everything within my window and an xref is in that window, it will be copied. I don't ever want to duplicate my xrefs, but I can't find a way to lock them (even when locking xref layers).
I have a client that is having difficulty with Design View Representations. He has approximately 15 view representations, each having items in different states of visibility. The icons display the modes of visibility correctly, however, there are no objects visible in the graphics window at all. Additionally, the option, "Find in Window" is missing when right-clicking on visible objects. Only when he copies the View Representation over to a LOD, and then saves that back out to a VR, do the graphics in the window appear correctly. Then the Option, Find in Window shows up and is available.
View 1 Replies View RelatedLine cable tray. How to do this kind of dynamic line in lisp?linetype.dwg
View 1 Replies View RelatedI'm trying to create a steel beam schedule, that include the bearing height of the beam, but I need to get the actual height of the beam so that it can be plugged into the formula.
AEC Design Services
I've used Photoshop for 13 years now and slowly over the years, the subsequent versions have had a problem with the brush cursor maintaining the correct size. Now, with CS6 the problem has become unmanagable! I used to have to go fairly often to preferences to reselect the option to display the actual size of my brushes and pens etc. While a pain, I could deal with it because it only happened once in a while. Now with CS6 it is in a permanent crosshairs mode and will not change no matter what prefs I select! Obviously this makes the program significantly less useful. I'm on a new Mac with Mountain Lion.
View 2 Replies View RelatedI just drew a shape with the pen tool. But even though I can see the line, it's not a real line. I can hide the layer and still see it.
View 2 Replies View RelatedI work at a university and have logos shared with me from other designers, most of which are working on Macs and I'm working on a PC. When I open the logo and select all, the size displayed is 227.5417 inches x 227.5417 inches. The last one I received, the actual size of the logo was 2 inches x 1.75 inches. How do I get Illustrator to display the actual size of the logo?
View 7 Replies View RelatedHow do you add a display component to a display?
For example, Stairs have a stringer componet in plan display configuration but does not have a stringer componet in the Low Detail configuration. I need the stringer to show when I go to low detail how can I add a stringer componet in low detail.
When using the mapdist command the measurement is different from the actual line that I create. The map coordinates and the maptrack coordinates match. When I open a older drawing there is not an issue. Did I somehow change the origin of my template.
Here is sample from the command line
Command: _mapdist
Specify first point:
Specify second point:
Distance = 12.7513 (Foot)
Azimuth = 38 degrees (forward), 218 degrees (reverse)
Delta X = 15.0000, Delta Y = -0.0381
Somehow the Properties Palette has gotten less wide- such that I can't read teh actual properties. Previously I was able to make it wider just by hovering over it, clicking on an arrow and dragging it wider. Not now.
View 1 Replies View RelatedThe font size shown should be double the actual display 36pt, but it's showing as 18pt. Do you know why it's happening?
View 9 Replies View RelatedI don’t know if there is some way to draw, or somehow to say to AutoCad that it let me to input measurements from line but not from main base pint.
For example in Revit I can make angular dimension between lines and then apply any angle that I want, maybe AutoCad has such tool?
What is the difference between Actual Pixels and Actual Print Size?
View 15 Replies View Relatedwhen i do a screen grab of my desktop and paste it into a new window the display is giving me a radically different color than what it actually is. the color is set back to what it should be when i do a save for web. i have tried color setting etc. but to no avail. please help.
i am running xp, ps7...
i have imported a shp file into dwg with their attribute.
how i can display any fields(BLGDID) in autocad dwg. and can i edit this by simply double click editing. can it update in object data's same field.
i dont want to use ADEEDITDATA but task is same .
any simple way
Using PN, I set up 2 levels. Level 1 at 0'-0", Level 2 at 10'-0". I create a Level 1 construct and create my AEC model. I then create my Level 2 construct and xref my Level 1 construct in to use as an underlay. However, using OOTB Medium display configuration I cannot see the Level 1 xref because the Level 2 cut plane is at 3'-6" and the Level 1 construct is 10'-0" below this cut plane. Is this the intended result?
To allow me to see my Level 1 xref in my Level 2 construct, I am required to override the global cut plane in my Level 1 construct and set my wall cut planes, for *each* wall style, to 3'-6". After saving the Level 1 construct, I reload in the Level 2 construct, and the walls appear, as an underlay, in the Level 2 construct as desired.
Is this the only way to see one xref above or below the other? Isnt one of the major advantages of using xrefs is as underlays for stacking levels?I dont have to override the global cut plane in all my wall styles.
How do you add the menu bar back in across the top and also how do you add the traditional "File", "Edit", "View", etc..
View 3 Replies View RelatedIn the attached image, the left is my 1st floor RCP, which looks the way I want. The right is my 2nd floor RCP, in which I cannot get the door jambs (orange lines) to turn off. Cut Planes are set identically in the two dwgs. I thought the Display Configuration settings were identical in the 2 dwgs, but clearly they're not.
View 4 Replies View RelatedHow to set or change the active display configuration with .NET. Currently I am sending this task to the command line. See below:
' This subroutine sets the correct display config with the supplied name Public Sub SetCurrentDisplayConfig(ByVal strDisplayConfig As String)Dim strCommand As String = "" strCommand = "-AECDISPLAYCONFIGSETCURRENT " & strDisplayConfig & vbCr AutoApp. Application. DocumentManager. MdiActiveDocument.SendStringToExecute(strCommand, True, False, False) End Sub
I am delving into the world of Display Themes in autocad architecture for the first time. What I am trying to do is apply a display them to a viewport that colour all spaces according to the zone to which they are attached.
I have made a generic space which I have used for all rooms. I have attached those spaces to various zones (i.e. Accounting and Finance, Engineering, Facilities etc.)
I am now trying to create a display theme that will color each zone accordingly. I am trying to do this by setting each theme rule to be;
propertyset definition = zone, property = name, condition = equal to, value = Accounting and Finance (etc.), operator = and.
I do this and nothing happens to the spaces. I have tried experimenting with other property sets attached to the spaces and different properties (ie space base area etc) and it works fine. So i'm pretty sure its just a case of finding the correct zone property to work with.
I have no clue what I messed with but when I draw a line or any object, no matter what layer I have it set on, it will display as yellow instead of "by layer".
View 2 Replies View RelatedSome how I changed the way my ribbon displays and I can't find the correct termenology to find the solution on the help section. Previously the different function icons displayed with each panel on the ribbon. now only the pannel and title display. Where do i look to change the setting back?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
using lenovo w520 with a 2 gig quadro 1000m win7 pro, a drawing file for a small cottage started to show hiding artifacts in most planes similar to when two items are drawn in the same place. ie, small triangles along the edges, and blotches of colour throughout the planes. however, only one entity was in each place.
I tried auditing the drawing, purging, rebooting, but nothing would fix this artifact issue. xreffed drawings in this file would have the problem inside the file (ie as an xref), but the original drawings did not. if I switched to parallel view, the problem went away.
as a fix, I copied everything to a new drawing, renamed the old one to a dead file, and renamed the new drawing to the original. this new file does not have the problem! is there some better, easier, faster, method to avoid this issue? and/or, did the drawing somehow get a setting that is not readily apparent and that could be easily reset? as a background issue, ACA died the last time I was in it, when I went out to Sketchup 8 and imported a dwg file. ACA died after about 5 minutes of sitting on its own. so, the file could maybe possibly have been silently corrupted by ACA when it croaked.
I've created a Live Section Cut. I want to change the hatching in the wall sections. I looked at the Display Property of the Wall Style, but the Model Display is bold, not the Section Display. The Section display has options for Hatching, etc., but the Model Display does not...Do I need to edit the Material assigned to that wall?
View 1 Replies View RelatedI have a project of a residential building, made in ADT2011. The building has 17 levels. Levels from 2nd to 17th are identical. They created as an element linked to constructs. The other levels created as constructs.
I also have different view files for elevations, sections and perspectives.
The problem is that I can not control display configuration of objects in view files. The thing that I need is to turn off balconies' glasses in curtain walls of the elevation view files (To see what is behind the glass in 2d elevations). Now to achieve it, I have to turn off glasses in the original element file. But in that case the glass disappears also in plans, sections and perspective views, where I need it.
The question is: Can I control the visibility of the default infills for curtain walls independently for different view files?