I'm electrical and have my own display set oddly enough named "electrical". When I set the display to "electrical" I can't osnap to endpoint or midpoint of smart walls in the background (nearest works fine). When I change the display to something else, generally it works.
Is there an "osnap" setting for displays?
So when i would select a line, hover over one of the endpoints, the length and angle would be shown, as a quick dimension. for some reason that has stopped, all it does now if i select the line, hover over an endpoint the only thing it says is stretch, or lengthen.
RANT!!! (come on 2013, thats stupid, stretch and lengthen are basically the same thing, dont you think if i stretch something it would automatically lengthen something, and if i lenghtened something, it in fact would also be stretching it. and to see you replaced the simple dimensioning of that line with a pointless i wouldnt call it option. now to figure out the length i have to keep the properties file open, or i have to draw a faux line over the current one just to check its length, or literally i have to draw a dimension line.) EnD!!
What option might have been turned off? and that the new array no longer gives you a box, but you do it all through the command line. or the dynamic input. That was an AWESOME box that i do miss dearly, and no longer have the option to bring back..
URL....Constantly in 12 and 09 I have had issues snapping to endpoints since the changes to osnaps in ACad itself. It doesn't seem the ramifications were followed thru to ACA.
They seem to have addressed some issues in 12 but not all and often it dails completely.As osnaps is a basic functionality I think Adesk needs to get this working properly and as a fix for 10,11,12 and 13.
there is a command that allows for editing the actual line work in an object controlled by the Display System... it is a last resort command if you cannot get the object to display as you wish.What is it?
View 1 Replies View RelatedIs it possible to create a work point on the midpoint of the curved edge of any feature.
I was not able to access the midpoint of an edge.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
Im trying to dimension the midpoints of a series vertical beams thats perpendicular to the x axis. How to dimension the midpoint of one beam to the midpoint of another beam?
Normally i just select dimlinear and then ctl + right click "mid between 2 points", but this way just seems time consuming when you have a series of them to do, is there a better way to dimension a series of beams from one midpoint to another midpoint?
How to place the “midpoint” of window on the midpoint of wall?
In the screenshot below, I wanted to place the window from its midpoint to the midpoint of the wall. How this can be performed on Revit?
I quite often like to use the wall grips to adjust the length of a wall. This works really well accept for the occasional situation were I want to snap to the face of another wall rather than the justification line. I know that I can snap to the face of a wall rather than the justification line because I have some files that it works fine in and other files that it does not work in.
View 2 Replies View RelatedHow to turn on the perpendicular osnap. Whenever i open the draft settings window and get close to the perpendicular name it changes to midpoint. I can not seem to select the perpendicular name.
View 2 Replies View RelatedWe model the building using AEC steel members in AutoCAD ACA. When the piping group xrefs our model into their model (in regular AutoCAD) to add their pipe, the AEC steel behaves properly in model space, but when they go to dimension in paperspace (for example from the center of their pipe to the face of a column) osnap does not recognize the AEC steel geometry.
View 3 Replies View RelatedI have an xreffed drawing and I can snap on wall edges in model space but not through paper space. I have tried the "allow snap on wall justifcation line" and nothing has worked.
View 4 Replies View RelatedUsing ACA 2011 and Win7 here... and I've noticed that the apparent intersection osnap does not want to work at all while working in a layout if the geometry I'm trying to snap to is also drawn in the layout.
If the geometry is in model space that osnap will work fine both in model space (through the viewport) and from outside the viewport.
How do you add a display component to a display?
For example, Stairs have a stringer componet in plan display configuration but does not have a stringer componet in the Low Detail configuration. I need the stringer to show when I go to low detail how can I add a stringer componet in low detail.
Using PN, I set up 2 levels. Level 1 at 0'-0", Level 2 at 10'-0". I create a Level 1 construct and create my AEC model. I then create my Level 2 construct and xref my Level 1 construct in to use as an underlay. However, using OOTB Medium display configuration I cannot see the Level 1 xref because the Level 2 cut plane is at 3'-6" and the Level 1 construct is 10'-0" below this cut plane. Is this the intended result?
To allow me to see my Level 1 xref in my Level 2 construct, I am required to override the global cut plane in my Level 1 construct and set my wall cut planes, for *each* wall style, to 3'-6". After saving the Level 1 construct, I reload in the Level 2 construct, and the walls appear, as an underlay, in the Level 2 construct as desired.
Is this the only way to see one xref above or below the other? Isnt one of the major advantages of using xrefs is as underlays for stacking levels?I dont have to override the global cut plane in all my wall styles.
How do you add the menu bar back in across the top and also how do you add the traditional "File", "Edit", "View", etc..
View 3 Replies View RelatedIn the attached image, the left is my 1st floor RCP, which looks the way I want. The right is my 2nd floor RCP, in which I cannot get the door jambs (orange lines) to turn off. Cut Planes are set identically in the two dwgs. I thought the Display Configuration settings were identical in the 2 dwgs, but clearly they're not.
View 4 Replies View RelatedHow to set or change the active display configuration with .NET. Currently I am sending this task to the command line. See below:
' This subroutine sets the correct display config with the supplied name Public Sub SetCurrentDisplayConfig(ByVal strDisplayConfig As String)Dim strCommand As String = "" strCommand = "-AECDISPLAYCONFIGSETCURRENT " & strDisplayConfig & vbCr AutoApp. Application. DocumentManager. MdiActiveDocument.SendStringToExecute(strCommand, True, False, False) End Sub
I am delving into the world of Display Themes in autocad architecture for the first time. What I am trying to do is apply a display them to a viewport that colour all spaces according to the zone to which they are attached.
I have made a generic space which I have used for all rooms. I have attached those spaces to various zones (i.e. Accounting and Finance, Engineering, Facilities etc.)
I am now trying to create a display theme that will color each zone accordingly. I am trying to do this by setting each theme rule to be;
propertyset definition = zone, property = name, condition = equal to, value = Accounting and Finance (etc.), operator = and.
I do this and nothing happens to the spaces. I have tried experimenting with other property sets attached to the spaces and different properties (ie space base area etc) and it works fine. So i'm pretty sure its just a case of finding the correct zone property to work with.
I have no clue what I messed with but when I draw a line or any object, no matter what layer I have it set on, it will display as yellow instead of "by layer".
View 2 Replies View RelatedSome how I changed the way my ribbon displays and I can't find the correct termenology to find the solution on the help section. Previously the different function icons displayed with each panel on the ribbon. now only the pannel and title display. Where do i look to change the setting back?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
using lenovo w520 with a 2 gig quadro 1000m win7 pro, a drawing file for a small cottage started to show hiding artifacts in most planes similar to when two items are drawn in the same place. ie, small triangles along the edges, and blotches of colour throughout the planes. however, only one entity was in each place.
I tried auditing the drawing, purging, rebooting, but nothing would fix this artifact issue. xreffed drawings in this file would have the problem inside the file (ie as an xref), but the original drawings did not. if I switched to parallel view, the problem went away.
as a fix, I copied everything to a new drawing, renamed the old one to a dead file, and renamed the new drawing to the original. this new file does not have the problem! is there some better, easier, faster, method to avoid this issue? and/or, did the drawing somehow get a setting that is not readily apparent and that could be easily reset? as a background issue, ACA died the last time I was in it, when I went out to Sketchup 8 and imported a dwg file. ACA died after about 5 minutes of sitting on its own. so, the file could maybe possibly have been silently corrupted by ACA when it croaked.
I've created a Live Section Cut. I want to change the hatching in the wall sections. I looked at the Display Property of the Wall Style, but the Model Display is bold, not the Section Display. The Section display has options for Hatching, etc., but the Model Display does not...Do I need to edit the Material assigned to that wall?
View 1 Replies View RelatedI have a project of a residential building, made in ADT2011. The building has 17 levels. Levels from 2nd to 17th are identical. They created as an element linked to constructs. The other levels created as constructs.
I also have different view files for elevations, sections and perspectives.
The problem is that I can not control display configuration of objects in view files. The thing that I need is to turn off balconies' glasses in curtain walls of the elevation view files (To see what is behind the glass in 2d elevations). Now to achieve it, I have to turn off glasses in the original element file. But in that case the glass disappears also in plans, sections and perspective views, where I need it.
The question is: Can I control the visibility of the default infills for curtain walls independently for different view files?
Got a problem with tool palettes ever since ACA 2012. When ever I start ACA, I have to push cntrl+3 to show the tool palettes. It's starting to get anoying that I have to do this, and I can't find any setting that will let the tool palettes display on startup.
View 7 Replies View Relatedi got one problem with properties palette. that is when i select line in the drawing, it display no selection in the properties palette. but display other objects except lines.
View 5 Replies View Relatedhow to adjust the display level on doors.
I have attached a PDF of my problem.
In the sketch is a simple room with 3 types of doors.
A Single door which displays properly
An overhead door which has a sq box attached to it and
A Double door which has all sorts of lines/boxes displayed on it
Ho do I get the doors to appear normal in plan view.
I have recently started using FIELDS in our drawings. I must say, they are very powerful.
This is what I would like to accomplish but have not been able to do it on my own.
I want to be able to add text/description to a block, then invoke that text/description with a leader. For instance, if I have a block of a 6x6 post w/ a square, I want to be able to insert the block, do a leader and invoke the custom description "P.T. 6x6 POST W/ CONC. FOOTING"
I have a file with several Space Styles. As I progress on the drawings I would like to modify some of the display properties, primarily color of the fill. I would think I could set the overall appearance of each Space Style in one location and then adjust elements of various display representations. In my case have a red hatch for a space style but in one display rep it would be solid and in another it would be a diagonal hatch.
As I see it, if I wish to modify the color I have to go into each display rep and adjust the color of the base hatch and click on the Style Override check box. It seems like duplicative work. Is there another method of setting the color of each Space Style so that it shows the same in all display reps?
Is there any to get the single line display into the medium or medium low rep by object? I see the only place to get it is to use the High Detail rep by object. Normally in a high detail would you not want a double line for doors? and use a single line for concept in the medium low? I would like to see the ability to have the single door in all display reps by object
View 4 Replies View RelatedThe best way to have normal AutoCAD objects (lines, plines, arcs) adhere to the Display Configurations.
My original idea was to contain all of the 'vanilla linework' in one Multi-View Block per Construct, thereby enabling me to set the Display Properties for that MVB and have the linework show/hide depending on my Display Config. I end up having to 'edit block in-place' if I want to change anything, which seems to work but there has got to be a better way.
My only other idea was to somehow link Layer Filters (which I'm unfamiliar with, and probably using the wrong term) to the Display Configs so that depending on the current Config, certain layers would be frozen/thawed. This seems like the way to do it, but it is not obvious to me how I might be able to achieve this through the Display Manager.
I want to change the color of a material definition in 2d wireframe (plan view). For example, for walls, when the mat. def. is checked in the wall display props, the hatching shows orange->color 30.
When I look at one of the materials listed for said wall, in style manager, for that display component, there are diplay components similar to an object format, but in the mat. def. the components control the color (see attached example).
Now is there a "master setting" to change them - I want to change say the plan linework or section hatch to a different color to match our layer color standards or do I have to go into every since display rep. for every single mat. definition and change them or is there a way I can do it once & all will change?
The out of the box objects are great but what I am worried about is that those colors that are given don't work well with our office standard, esp. if we go back to old projects.