AutoCad :: Line Length Display On Endpoint Hovering
Feb 1, 2013
So when i would select a line, hover over one of the endpoints, the length and angle would be shown, as a quick dimension. for some reason that has stopped, all it does now if i select the line, hover over an endpoint the only thing it says is stretch, or lengthen.
RANT!!! (come on 2013, thats stupid, stretch and lengthen are basically the same thing, dont you think if i stretch something it would automatically lengthen something, and if i lenghtened something, it in fact would also be stretching it. and to see you replaced the simple dimensioning of that line with a pointless i wouldnt call it option. now to figure out the length i have to keep the properties file open, or i have to draw a faux line over the current one just to check its length, or literally i have to draw a dimension line.) EnD!!
What option might have been turned off? and that the new array no longer gives you a box, but you do it all through the command line. or the dynamic input. That was an AWESOME box that i do miss dearly, and no longer have the option to bring back..
View 4 Replies
ADVERTISEMENT
Oct 19, 2010
I must have changed a setting and now I cannot figure out what I did.
On AutoCad at school, when drawing a line, there is a light blue dialogue box that would pop up above the cursor telling you the length of the line before you set it. (not the coordinates).
This is not showing up on the educational version of AutoCad I am running at home.
View 9 Replies
View Related
Jul 25, 2012
When building an annotation template, in the block editor (annotation editor etc..); how do you take the length of a 2D line or pline to be the display of my template?
Doing a water system map and it would be nice to have a line length with the ' symbol at the end rounded to the nearest foot on each length of pipe.
View 4 Replies
View Related
Nov 8, 2011
How to position a Point Helper at the endpoint of the Taper Length in 3d space? I think it would extend the Taper in its use for rigging things. Have a look at the screenshot. I mean the magenta ones.
I know there is a mathematically way with vector analysis, but it's to long ago to script it fast. Or is there a helper which has the same capability?
View 8 Replies
View Related
Sep 1, 2010
I'm electrical and have my own display set oddly enough named "electrical". When I set the display to "electrical" I can't osnap to endpoint or midpoint of smart walls in the background (nearest works fine). When I change the display to something else, generally it works.
Is there an "osnap" setting for displays?
View 7 Replies
View Related
Mar 20, 2012
I recently purchased LT 2012. I was using LT 2008 until now. When I grab a line from the endpoint grip and try to lengthen it by typing in a value it either shortens the length by the value I type, changes the overall length to the value I type, or does what I want it to- actually makes the line longer by the value I type but doesn't do any of these consistently. It didn't do this in any older version I've used and I can't find a setting to change it.
View 9 Replies
View Related
Oct 22, 2013
I am look at a way to place the start of a line a certain distance away from the end of another endpoint. Is there a more productive way of doing this rather than drawing one line on the x axis and another on the y axis.
View 9 Replies
View Related
Feb 12, 2013
Can I select a line and get the nearest endpoint so I can do something to the line using the endpoint as a base?
It will include an ssget and an osnap "end" in the code, but not too sure how to put it together.
View 3 Replies
View Related
Jan 8, 2013
Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
View 3 Replies
View Related
Mar 16, 2012
I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
View 5 Replies
View Related
Jun 8, 2012
[URL]....SAYS:
“Adjust the length or angle of straight segments
1. With the Direct Selection tool, select an anchor point on the segment you want to adjust.
2. Drag the anchor point to the desired position. Shift-drag to constrain the adjustment to multiples of 45°.”
Question: How do I proceed if I’d like to extend a line on one side by its endpoint, while I want to keep its original angle instead of 45° degrees?
And: assuming we’re not working with a standing-alone line, but as part of a construction, as you can see on the screenshot. The point should be move to the intersection on both lines (green and turquois).
I thought, maybe working with functions in GRAPHER – but I hope there is an easier way directly in ILLUSTRATOR.
View 8 Replies
View Related
Oct 27, 2009
I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies
View Related
May 6, 2013
I build frames with various lengths of square and rectangular structural tube. All of my tubing members are generated from a custom iPart factory. When I insert a tube into my assembly, I key in the required length and the tube is generated. I would like to be able to automatically display the length of the member in a custom field in the parts list.
View 1 Replies
View Related
Dec 20, 2012
How do I get back this information on a selected object? (I tried to speed up a laggy ACAD of a friend and switched off too many things, obviously...)
Used Version: AutoCAD 2011
Untitled-1.jpg
View 3 Replies
View Related
Jun 13, 2013
I have used AutoCad for a few years and I installed 2013 to my laptop recently.I noticed that I couldn't specify how long a line should be. When I select the line tool and specify the base point and type how long it should be i.e. 3' and a red box appears around the dimension box and the line isn't drawn. I tried not specifying a unit of length and it draws the line just fine. But for some reason it wont complete the line if I specify feet or inches.
View 2 Replies
View Related
Dec 2, 2011
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurDb As Database = acDoc.Database
ed = acDoc.Editor
[Code]....
I need to get the line object length. i Have written the below code.
If i use area property i am getting zero.
View 3 Replies
View Related
Dec 9, 2011
I'm having a problem entering line lengths - something I remember occurring some time ago - but I can't' recall how I remedied it. The '@' symbol take time to register - instead of registering immediately as previously. I now have to check the command line each time and allow a moment for it to register before entering the values.
View 4 Replies
View Related
Dec 5, 2012
In previous versions of autocad after I select a line, and put the mouse pointer over a vertex, there would be an on screen number displaying the length of the line. In Autocad 2013 this seems to have disappeared. how to get it back?
View 2 Replies
View Related
Sep 5, 2013
I've recently re-install my AutoCAD on my Win7 PC and now whenever I try to draw a Line, there's this automatic measurement of the length of the line I'm stretching. It is really causing a lag on my PC for some reason and I seem to can't find a way to turn it off.
View 2 Replies
View Related
Nov 15, 2013
In Autocad 2006, is there a way to control the length of the dimension line when it extends outside of the dimension distance itself? In other words, when a dimension is small, and the arrowheads flip to the outside of the dimension parameter, the text and the extension line outside of the dimension seems to go to far outside of the dimension area..
Can I control how far outside of the dimension area that this line and text are placed? They seem to go to far out on my drawings. I prefer them to be closer to the actual dimension area instead of extending so far out.. Didn't know if there was a control for this and where to find it.
View 1 Replies
View Related
Feb 28, 2013
I have to flip out dimension lines/arrows all the time. How do I control the length of the dimension line when it is outside two lines?
View 1 Replies
View Related
Oct 17, 2012
How can i assign conduit length tag on line....? know that i have multiple lines and i wanna get total length of multiple line so how can i do this....?
View 5 Replies
View Related
Nov 3, 2012
I use Cad2013 . During a line command , I can not see the length beside the courser , so I have enter the length using keyboard and it is very time consuming .
I do not remember if I changed any default settings but It used to work properly .
Win 7-32 bit - cad2013 full version - no plugins - No viruses .
View 9 Replies
View Related
Oct 12, 2006
Is there a tool where you just click on any line and it tells you how long the line is from end to end?
Basically I am drawing a curvy line that twists and turns here and there, but the line has to be less then so long. So I have to approximate the length by doing strait measurements and multiplying, it's really a pain.
I'd much rather just click the line, and it tell me how long it is from end to end, across turns and rounded edges and corners.
View 8 Replies
View Related
May 31, 2012
How do yo display the focal length in 35mm equivalent? I've found a plug-in that sorts photos in 35mm eq., but I'm looking for a way/plug-in that displays the focal length in 35mm eq. in the loop info.
Every other PP editor that I've used in the past were inferior to LR but still had the ability to show the focal length in 35mm. I'm wondering why LR, a far superior tool, is lacking in that department. Since I'm still learning photography and use 2 interchangeable lens camera systems with different crop factors and well as two compact cameras, going through my photos with the focal length in mind really give better understanding of perspective.
View 3 Replies
View Related
Feb 2, 2012
I would like to draw a line that is a specific length, lets say 16, that originates from a specific x,y location say 10,23, that terminates at exactly atleast the y coordinate 38. I don't care about the x or the angle.
View 9 Replies
View Related
May 18, 2005
I have a plane defined from ucs-world points: (1,1,0),(3.6,2,1),2.2,3.6,2) .
It is intersected by the line defined by ucs-worlds points: (1.6,3.2,0.2) and(2.8,1.4,1.8 ).
Im having trouble trying to manipulate the UCS in order to find the location of the piercing point, the true length of the line and slope.
View 7 Replies
View Related
Sep 30, 2013
Is there any simple code for to sum length of lines which is i am choosing and copying result to chosen attribute tag ?
View 1 Replies
View Related
Feb 15, 2012
How do you draw a line without the line length/angle showing as to go?
View 6 Replies
View Related
Jun 20, 2013
I have surface style (could be slope or spot elevation) with a 2 line component, and text component above and below the line. I'm trying to create on style for many options. I'm using c3d 2013, but moving to 2014.
I would like to do the following after placing the label:
1. adjust the length of the line component. (ex: as I rotate the lable, the length of seg 1 changes )
2. turn off one of the line component
3. adjust the angle of one of the line component.
4. when drag, the length of the line changes to a new value.
and while I'm asking, is there a way to move/rotate/drag the syle to a percise distance. I want the leader to be 1 unit long at 30 degree angle.
View 2 Replies
View Related
Jan 15, 2013
I am using Civil3D 2012 SP 2.
I am creating a block for my details. I want to be able to title my block and the the line under my txt will change it's length based on the lenght of the text. I keep playing with the constraints, but I haven't found one that is doing what I want.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 2 Replies
View Related
