Returning to Illustrator after not using for a long time.
How can I permanently show paths created for example by the pen tool when I create them with no fill or stroke attributes - for example a set of contours?
If I set the view to outline (control + Y it does this but puts them on a white background meaning I can't see underlying layers.
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
I spend 12 hours a day in illustrator and some functionality seems to simplistic and ultimately annoying.I'm using Windows 7 64bit. Adobe Illustrator CS6
1. Please auto switch between Stroke fill and fill when I select text. 99% of my time is spent only using fill on text. I would rather manually switch to Stroke when I want to add a fill to it rather having to switch to fill each time.
2. Same for Stroke, from point 1.
3. Add an auto layer for Guides. When I am using the Scissors tool, the majority of the time I don't want to cut my guides up, I would rather instead cut up the shape below it. Again manually changing the layer to select the guide would be preferable.
4. I personally never use the Eraser tool and I switch to the Scissors Tool. Without fail every time I launch Illustrator I have to switch from the Eraser Tool too the Scissors tool. Please add cookies or something so I don't have to always switch to the Scissors Tool.
5. Move "Align to Pixel" toggle somewhere outside a file menu.
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
I've used image trace to trace the outline of a street grid and expanded the trace into paths. However, after doing so, I realized I wanted the streets a bit thicker, so I increased the stroke value.
Is there a way to adjust the old paths to match the new outline? I tried saving it as a .jpg and retracing but the quality was subpar. Any way to "redo" the trace in the original file, or somehow tell Illustrator to move the paths to match the increased stroke? I need them to coincide once more with the edges of the streets. URL...
In the attached, I've placed red circles around areas where I would like to start paths that will be thicker when they start (so that they look like they connect in a seamless way from the decorative swashes around the pre-existing, diamond shape in the middle of the page) and then get thinner as they go on. How do I do that so it gets realistic?
Also, how do you vary it genereally? I may want to thicken the paths again when they end.
I know how to use the pen tool decently but at the starting points I can't seem to get things to look like they realistically join what's already there.
A screencast of my problem: [URL] .....
My illustrator has been really wonky lately; Mainly just not keeping lines where I put them. Is there an invisible pixel grid that I accidentally turned on at some point, and now everything is trying to snap to it?
I'm working at very large sizes, and I already tried reinstalling Illustrator. I can't seem to find anything on the Adobe forums, but I'll admit I'm bad at finding info I need online.
I am new in Illustrator, I don't need those white lines in the middle, so I would like to know how I can fill that shape fully with black color?
View 2 Replies View RelatedIn Illustrator I want to maintain the stroke settings while creating several paths with the pen tool. However, every time I start a new path, the stroke settings revert to what must be a default. E.g. I set 16pt + Variable width profile + Basic and stroke a path. When I start a new path, the settings revert to 1pt + Uniform + Basic, and I have to reset back to my original. Other art programs I've used maintain the tool settings most recently used until they are manually changed. How can I get the settings to stay through multiple uses of the pen tool?
View 4 Replies View RelatedHow do I give Lucida handwriting a 2pt outline stroke, give it an outline path, then unite it with another shape path without the text losing it's outline stroke?? I can't bold Lucida handwriting as it only has an italic option, so need to give it an outline stroke to achieve a bold letter. As soon as I give it an outline path and unite it to other shape paths the 'bold'ness disappears and it reverts to it's original size.
View 8 Replies View RelatedRightly or wrongly I have a shape drawn with line sement and pen
I want to fill the inside of this white, how do I do that?
I am just starting to learn Illustrator and am having an issue with filling an object. I am creating a box and when I fill that box the top acts as if there is a straight path even though there isn't. Also the right side of the box cuts only fills diagonally.One with the paths, two with the incomplete fill.
View 7 Replies View RelatedI can't fill my paths and symbols, only show up no select.
View 5 Replies View RelatedOnly showing black/white paths, not the lines and coloring I've done---how do I revert back?
View 3 Replies View RelatedI have a number of filled objects in various colours.Is there a quick way to swap their fill and stroke colours all in one operation in the same way as can be done with single colours with Shift+X?
View 8 Replies View RelatedI am creating a simple spider for a project. Initally I used the pen tool to make legs. It worked for a bit then all the sudden started filling in an area I didn't even draw with color. I'm not sure what I did to cause this to happen.
View 3 Replies View Relatedwould it be possible to set no fill and 1px black stroke as the default fill when I start up illustrator?
View 1 Replies View RelatedI'm having problems getting what I want on Illustrator CS6. This is the shape that I'm working on: [URL]
I got two paths, one for the inner outline, one for the outer. I want this to be one object, looking just like that, where red is the fill, and black is the outline. Simple as that. [URL] - this is what i want.
So, the inner "circle" is not filled with anything, beacause my object is this "frame" outside. But since I have two seperate paths, I'm filling the outer path with colour, and I get:
[URL] the outer filling is red, the outside is transparent, which is good, but the inside is red because the inner path has no filling.
Right, so next I fill the inner path with white and it looks almost good: [URL]
But the inside is not transparent, it's an "illusion" and everything will be great on a white background, but that's not the case.
I want to convert these to paths into one object to behave exactly like I showed in the first image. Red is the fill, black is the outline. And I plan to use gradient mesh heavily on that shape, so that has to work to.
Bad quality, just doing some quick previews on Photoshop.
Unalbe to use eyedropper tool to pick up stroke attribute from one shape to use in fill of another shape. I shift click with my eyedropper tool on stroke but does not transfer that color to my fill color of other shape. Fill color shows correctly in tools panel but not in shape or control panel.
View 11 Replies View RelatedHow can I draw a continuous stroked line with a fill, so that it overlaps and covers the previously drawn part of the line? I'm trying to draw some text so that it has an effect like in fig. 2 of the attached picture, not fig. 1. Is it possible to make somehow? For a simple image like this I could of course manually remove the few lines, but for a more complex text it's not possible, and I can't seem to find a solution myself.
View 7 Replies View RelatedSo here's what I wrote to try and find and delete all pathItems within a document that lack a fill and lack a stroke.
var doc = app.activeDocument;
for (i=0; doc.pathItems.length>i;i++) {
alert(doc.pathItems[i].name + " " + doc.pathItems[i].fillColor.name)
[Code]....
But alas, neither seems to do the trick, the first one makes sense why it wouldnt work since it says that the color is "undefined" but it isnt a string called "undefined." So I'm not sure how to go about this at all now.
Everytime I set the fill/stroke color of objects in a file to 75, 68,67, 90 it resets it to 0, 0, 0, 100. It isn't consistent though... some objects accept the color.
View 5 Replies View RelatedSelect same fill color with java script and stroke color tool.
View 1 Replies View RelatedI have done this a thousand times, and not had a problem. Basically I tried putting a gradient into text, and nothing happened. I tried it on a shape, and it worked fine. So I went to the appearances panel and added a new fill for the text. It worked, but even with the stroke disabled, there is still a weird glitchy outline around the text?
I tried exporting the file as PDF to check if this is just showing up in program...but it shows up in the outputted PDF too!
I need to send vectorized art to this company that only uses Illustrator. I have never used or even opened Illustrator. Ok, I'm very familiar with Freehand so I get the basic idea about vector. I have a 3 color logo that I have saved as a Photoshop DCS .eps file with the channels saved as spot colors so I can print separations with Pantone colors. According to what I have translated from the Photoshop guide what I need to do is figure out how to get my clipping paths of each channel to retain its fill when I export paths to Illustrator. I've tried and when I open the vectorized paths in say Freehand there is only lines and no fills. Do you guys have any ideas on how I can get these file seperations to this company with Illustrator?
View 3 Replies View RelatedI am wondering if there is a way to use the "select same fill color" and/or "stroke color" for just a group of objects in a document as opposed to document-wide.
View 6 Replies View RelatedI am new to the Appearance palette
See screen shot attached. (the text "Helvetica")
I have created some live text (ie: it remains editable)
I have given it a fill of black and a heavy (7pt) stroke of blue.
I cannot appear to rearrange the stroke so that it falls beneath the fill
I assumed it would simply be question of dragging it below, as one would with the Layers
However, when I converted the text to outlines (in this case the text "UNIVERS") it works.
And also why are the eyes in the first coloumn grayed out when the text is live. But not so when text is outlined?
So I noticed that when selecting multiple closed paths with a fill you can no longer swap them to a stroke in your tool panel. I am assuming that this just got overlooked.
View 1 Replies View RelatedI'd like to make it easier for our 100,000 designers to use AI to make custom products using a laser cutter.
Current Practice
Designers open our AI laser cutting design templates, add their designs using the AI settings our online pricing system can read, then upload their designs to our website for instant pricing, making and shipping.
The Problem
Designers have to manually setup AI with settings that can be read by our online pricing system. If they get these settings wrong, our system can not read their designs. So they are rejected and can not be priced or made. This happens more often that you'd imagine.
The Solution
Designers do not like design rejections. So I'd like to eradicate them by providing our designers with a version of AI that provides the following settings only:
* Set document to RGB
* Stroke weight = 0.01mm
* Stroke colors = RGB 0, 0, 255 and 255, 0, 0
* Fill color = RGB 0, 0, 0
This will mean designers have a very limited number of AI choices, with nothing to distract them or to get wrong. Which will result in less (or zero?) design rejections. And products made faster than before. Rejoice!
Question
How do we program our AI laser cutting design templates so that when they are opened in AI, they auto set AI settings as defined above?
I want to use a 3rd party brush to 'color in' parts of a drawing or paint the background so it has a nice effect.However, when I use the brush tool to add color it reacts in an odd way as seen in the snapshot. I've looked at the brush options but am unsure of what will make a difference. Is there a way of devoting more ram to the program when I'm using it?
Is there an alternative way of adding the same stroke to the actual fill of a shape? At the moment all of my fill colors are block colors rather than having a kind of chalk / pastel texture that I can get with the brush. Basically, I would like to fill shapes with textured color rather than flat color.