Illustrator :: Stroke Showing On Text Even When Disabled?
Feb 23, 2014
I have done this a thousand times, and not had a problem. Basically I tried putting a gradient into text, and nothing happened. I tried it on a shape, and it worked fine. So I went to the appearances panel and added a new fill for the text. It worked, but even with the stroke disabled, there is still a weird glitchy outline around the text?
I tried exporting the file as PDF to check if this is just showing up in program...but it shows up in the outputted PDF too!
Returning to Illustrator after not using for a long time.
How can I permanently show paths created for example by the pen tool when I create them with no fill or stroke attributes - for example a set of contours?
If I set the view to outline (control + Y it does this but puts them on a white background meaning I can't see underlying layers.
I'm trying to turn a photo into a Line Art drawing.
I've been following instructions and it's all been working until I try to make a stroke path and it's disabled. I've read through these forums and have done everything suggested (ie. made sure the pen tool is set to paths in option bar, made sure the pen icon is chosen when I right click to 'stroke path', ...)
Here's what I did...
1. Set the pen tool to create new work paths
2. Used pen to outline the face in the photo. Finished the shape so the path joins up.
3. Right click to choose stroke paths
I'm using PS CS3 Version 10. Can anyone tell me why I can't access stroke path when I right click?
i am trying to create a drop shadow on text. i select the text and then copy and then paste in back. however, the copy shows up way above the text and not behind it. what am i doing wrong?
So, created text -- added warp effect. What I'd normally do is just then expand -- then unite -- then stroke it. But -- I'm sure there's a way where I could keep that text and effect editable while adding a stroke to look as if I united so the stroke follows the group and not the individual letters.
I run a screen printing business and I recently added some simple design services to my clients to bring in more business.I have attached the graphic which is a mock up of what I'm trying to do with the text.
I'm looking to have the white knockout to the background color. it's a black text in the center, a (what should be) knockout outline of that black text and then another black outline outside of that.how to set it up, order and arrange the text so I can simply keep the look of the white knocking out to the shirt color.
In the past day I have run into a problem whenever I copy and paste any text inside Illustartor CS6. If I copy text from outside Illustator and paste in a file, everything is ok. But if I copy text from inside an AI file and paste into another AI file or to the same file, I get a bunch of extra text that gets displayed before the pasted text. In the example below I copied and pasted the text "This is a test" within the same AI file, and got the a bunch of information above the text.
I want to add a black border around the text so it accentuates the text.
I have made a rectangle and added black text on top of the rectangle and applied a mask and inverted and clipped the rectangle and text.
I tried to release the mask and apply a black stroke on the text but when I remask and apply clipping and invert the stroke turns the same color as the text.
I'm creating text that will be printed on a deep gray to black tshirt.
I created text, added an offset path to it with a gradient, and a deep gray color fill on top, achieving the gradient stroke. However, I'm not exactly sure what color the shirt itself will be, other than deep gray to black. And I didn't want the deep gray/black fill in my text to appear and look awkward on the shirt. Unless that is something I shouldn't be considered about.
To be safe, how would you create transparent text with a gradient stroke? I'm using Illustrator CS5.
I have text with two strokes apllied to it. I want to cut/delete the first stroke to have the apperance of a stroke that has a gap between the text fill and the stroke. Or if there is an easier way to have the outline apllied, expanded (for lack of a better term) off of the fill?
Let's say I have some text (black) with a black stroke on it. (It creates the look I want, without using BOLD.)
How can I convert this text to include the stroke as one entire object? No stroke, just one entire vector shape?
(I notice if you import text this way into Flash, convert to a symbol and fade up from zero opacity, you see the fill as a different value than the stroke value - very annoying.)
Is there a Pathfinder command that I can use to fix this text?
How do I give Lucida handwriting a 2pt outline stroke, give it an outline path, then unite it with another shape path without the text losing it's outline stroke?? I can't bold Lucida handwriting as it only has an italic option, so need to give it an outline stroke to achieve a bold letter. As soon as I give it an outline path and unite it to other shape paths the 'bold'ness disappears and it reverts to it's original size.
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
I am using illustrator 5, and trying to create white text over black background or black square, after saving the file to SVG icon, all black and can't see the white text. If save file to other format, looks ok.
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
I need an outline on a stroke that i drew but when i apply object>path>outline stroke i keep getting my initial stroke applied as well. I only need the outline, not the initial stroke. I use Illustrator CC.
I opened a file I had been working on yesterday on a different Mac, and got the error message: "3D functionality is currently disabled due to OpenGL being disabled." I am currently using MacBook Pro (2008), running Mac OS 10.9, using PhotoShop CC. I've already looked at Ps Preferences>Performance and I see this.
Layer effects are enabled for the affected layers and the layers show the stroke effect active on the shapes, in a colour and size that would be very visible.
Is there some other overall setting I may have accidentally triggered?
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
I am not entirely sure why but all of a sudden my abienlity to drag anything with my mouse has been disabbled. When I try, it makes the ding noise that goes with being unable. I can still move the objects with the arrow keys. I am not that experienced with CS6 having only recently up graded.
I'm trying to save my document to send to a client as a mock-up. When I try to save as PDF the tick box for "Use Artboards" is disabled, so when I save it saves the whole canvas instead of only what is on the artboard. When I try to export I can tick the tick box but the document still saves the whole canvas with everything that is "hanging off" the artboard too. The artboard is the exact size of the document.
I am running CC on an iMac with Mavericks. It is a brand new system. My spacebar hand tool seems to be disabled. I have tried opening Illy while holding Shift/Option/Command.I have disabled the Command/Spacebar shortcut in Spotlight..The tool doesn't work in Photoshop either. I have looked high and low and have made no progress.
I have a pre-existing graphic uses a stroke with variable with profile (I think) or a special brush to make it look like it's hand drawn. I'd like to apply the same effect to a few new illustrations to keep the style consistent. For whatever reason when I ungroup the graphic and select one of the paths, the stroke weight and variable width profile remain disabled (see pasted toolbar graphic below). The brush still says "Basic" despite the fact that visually it is certainly not the basic brush.
Selected Path
Toolbar (I realize that it says Group instead of Path, but even if I ungroup again and select the path the same options are disabled).
I've got a bit of trouble with Illustrator that I assume has a really simple answer but I can't seem to find the preference for it. My objects seem to be snapping to place but, as far as I can tell, I have all those settings disabled.
Things to note:
View > Snap to Grid > Disabled View > Snap to point > Disabled Preferences > Selection and Anchor display > Snap to point > Disabled
I have a simple shape that doesn't work with the width tool. I have other shapes in my doc that work fine, even ones with gradient fills. What is wrong with this one shape?
Somehow the pixel x pixel size box when drawing ellipses/lines/rectangles has been disabled. I cannot locate it's toggle. Need it reactivated to draw precise shapes.
