I want to add a black border around the text so it accentuates the text.
I have made a rectangle and added black text on top of the rectangle and applied a mask and inverted and clipped the rectangle and text.
I tried to release the mask and apply a black stroke on the text but when I remask and apply clipping and invert the stroke turns the same color as the text.
Any way to do this using strokes, but everything I've tried so far has been unsuccessful. I'm starting to realize that this may actually be impossible, but maybe there's a trick I'm unaware of. Pic should explain what I'm trying to do.
View 3 Replies View RelatedI'm pretty new to Illustrator so there's a chance this is a stupid question, but I'm pretty stumped on this. If I have a path with a stroke that is set to either inside or outside, it disappears if I draw something inside of it to convert it into a clipping mask. The stroke shows up again if I align it to center, but even this seems to have some quirks as it won't display multiple strokes. After searching the web for a bit this is the best description/example I've been able to find for this problem:
[URL]....
Anyside strokes or multiple strokes to work correctly in this scenario? If not, is there a logical reason for this or is there a bug?
I am trying to create seamless pattern repeats. Most of the time when I do this I get thin lines between the tiles (I place the original pattern and move>copy it to exact measurements). I have read in other forums that these are 'ghost' lines which don't appear when the design is printed out, but I've had fabric samples printed that do contain a line. Also sometimes the motifs on the edge of each tile don't match up - see the slight line down the orange / white cups here:
I move>copy the motifs using the exact measurements of the artboard, I line up my clipping mask with the artboard and they are exactly the same size, and they have no stroke width. I can't work out why it still does not work.
Even before I copy and tile the design I sometimes have a thin white line down one side - see below.
Why does Illustrator place a hair line stroke around a clipping mask? How do I change that? I tried anti-alsing but as expected the entire image is applied.
View 1 Replies View RelatedI'm currently working on a project in which I have a background that has a large text layer above it. What I want to do is create a sort of "dynamic" clipping mask that essentially subtracts the shape of the text from the background yet remains editable as text in case I need to change the word or font.
However every way I've tried so far as been met with the backgrounds instead being constrained inside of the shape of the text...which is NOT what I want.
How can I do this while still having the text able to be edited?
OS: Windows 7 64 bit Ps: CS6
Create a New Layer and place it above the "main object" layer (which has a Clipping Mask) and also apply the Clipping Mask Then I am to Ctrl + Click the main object to Select it and then Right Click to choose Stroke from the menu.
However, when I right click the New Layer with the Clipping Mask the Stroke option is not available ~ nor is it when I click on the object itself on the canvas.
So, I went to Edit > Stroke and tried to apply the Stroke that way but the Stroke is not visible.
I also tried going to Blending Options to apply the Stroke but it's not visible this way either.
[URL]
Im making a logo for a client and am having a nightmare of a time trying to properly use the clipping masks in illustrator CS5. I copied and pasted the logo I made behind itself with a different color just for a drop shadow-like effect. And now I'm trying to apply this diagonal line pattern I created over top the "shadow" I made to give it some texture.
Here's an example of what I'm going for, only imagine the line pattern on the text instead of banner.
I have created custom text, so that each letter in my 3 letter word is a separate compound object.
Now I have made a filled (with gradient) ellipse and rectangle behind the text to create a clipping mask with all 3 text objects. (see image1) However, when I select all the objects and select: object>clipping mask >make, it only mask the one letter, which is the one on top. (see image 2)
However, when I group the 3 letters together, it does not create a clipping mask at all, it shows nothing... (see image 3)
How do I ake all 3 letters be in the mask?
[URL]
I have a text layer I wish to use as a clipping mask, for an image above. But the text layer also has a stroke around the outside of the text, to thicken it a bit. I want the stroked part to be included as part of the mask, i.e. for the image above to be projected onto both the text body AND the stroke around it. However, it seems that the stroke is ignored, and only the basic text shape used as the mask.
How do I achieve an effect whereby the image above is projected also onto the stroke?
I have a similar problem with a shape layer I have. It is a rounded rectangle shape, but I am only using the shape to act as a path around which I stroke to create a 20px frame. I want the frame (only the frame) to be used as a clipping mask, so that an image is projected only onto that frame, and NOT inside or outside the frame -- only on the frame. I can set the "fill" to 0% to create a transparent interior, so that all I have is a frame, and transparency inside and out (which I would then hope is a great clipping mask to use for my purpose), but I guess photoshop views this as being entirely transparent (i.e. effectively no mask at all) because it ignores the stroke part completely.
Level: Newbie OS: Win7 64bit Ia: Cs6
Once I use a Clipping Mask on a layer is the entire document covered in a mask?
And/or is all the artwork from then on inside the mask?
I've read about how to add and how to remove art from a mask. I've read about how to make and release and lots of other things.
So, then I went and found a lesson that contained the use of a Clipping Mask.
I am suppose to Select the main shape and "just" copy it and move it down (doesn't say rather to Paste in front or back but I assumed in back ~ not that it has mattered thus far)
However, while making the main shape I used Gradient Mesh and used an Offset to create a "replica" and so when I go to Select the main shape the mesh is selected and so when I Paste (in back ~ seems most logical) and then move it down the details such as the colors of the Gradient and other such things are visible in front ~ ??
So, I have been trying to abate my problem in lots of different ways.
I have tried using the Pen tool to draw behind the main shape, I've tried making a New Layer and placing it above and below and inbetween the main shape layer, I've tried adding the artwork to the Mask ... I've tried everything I can think of and I've been through many an article in the manual and FAQ's to no avail.
I suppose, what I think I need to know ... is, how ... how on earth do I draw behind this main shape? Am I not able to do it because I am not getting behind the Mask?
I can create a shape, drop in an image from outside world, put the shape on top of it, [Command + 7] to create a clipping mask now... I want a nice border around the OUTSIDE of the shape.
I can get a centered stroke. But that's not much use as it begins obscuring some of the content as soon as the stroke has any decent amount of width.I can double click "into" the mask object, and change the stroke to "outside" or "inside" via the Stroke panel, but at this point the stroke disappears.
URL....Everything works fine until I get to the part where it says to: 'Copy the crimson circle and Paste it In Front'..first of all I think the copy should cover everything else, right? At least it looks that way in the tutorials' picture. Well, it doesn't cover and it seems to stay in place.
I look in the Layers palette and it shows that a Copy has been made and I look under Edit and it says under Undo: Undo Paste In Front.Next I am suppose to Select the Crimson Circle Copy and The Blend and then go to Object > Clipping Mask > Make
Rather than it working I get an Error Message that says: 'Can't Make Clipping Mask, The Top Selected Object Must Be A Path, A Compound Shape, A text Object Or A Group Of Those'
No matter what I do I cannot make a Clipping Mask in this manner.I have read a lot about Clipping Mask today and have looked in the FAQ's to no avail.
I'm working on a tshirt and can only use 3 colors (Green, Black and Yellow). If you look at the attached image, I need to make the brown color that is inside of the squirrel mask out the items behind it (corn stalks, rectangle and part of the "R" in "Corn Maze". The tshirt will be grey so once the Clipping Mask is applied, it will allow the grey tshirt to become the color for the squirrel.
The problem I'm running into is if I duplicate the squirrel and use him as a clipping mask, it does the opposite of what I'm trying to accomplish. I need to mask out everything inside the squirrel, not everything outside the squirrel. In photoshop, I could just inverse the selection. Not sure how to inverse a Clipping Mask.
I am trying to make a clipping mask with a wood image and a box I drawed in artios cad.That passage from artios do ai even with the plug-in is not easy, everything is locked. after I unlock the paths i need, i trie to apply the clipping mask an everything disappears our i cases i try with a :*eps file come out like this.
View 5 Replies View RelatedI need to clip a gradient design in Illustrator with a mask. The clipping mask show how I want it but I need to acctualy have the shape just not the mask. I have to import it to a sign program and I need to be able to outline it.
View 1 Replies View RelatedI have the illustration wich is basically just some dots, i grouped all the dots. Put my text in front of it select both, make clipping mask. The text becomes white and it says the top object is very complex and may cause the document to fail to print or preview if used as a mask.
View 10 Replies View Relatedhow to make a clipping mask, URL....In the link to above tutorial on how to make a medieval scroll I'm stuck.
As said in step 25 that expand the appearance of the scroll and select the two then clip the mask. In th above picture I have just selected the scroll to show how it looks.
I have expanded the appearance of the paper scroll. Then I selected the paper scrol and the yellowish green grunge background placed below it. And the moment I hit Ctrl+7 (in windows) or Command+7 (in Mac) to make a clipping mask the error that showed up has been highlighted.
I'm following this tutorial to create an eye in Illustrator but am stuck creating the clipping mask in Step 5. I've got the irises and eyeballs on one layer with the eyeballs brought to front. However, when I select an eyeball and iris and create the clipping mask, the iris disappears.
View 3 Replies View RelatedI'm trying to export Illustrator clipping mask as PSD file, but when i import file into Photoshop i my clipping mask is not cropped, so it imports the borders of the rest of illustration artwork. I tried to expand the clipping mask, getting same result. So, how to prepare clipping mask in Illustrator to export for Photoshop with same borders as mask have?
View 4 Replies View RelatedIve made some digital bunting in Illustrator using a triangle shape with a dashed line to make scalloped edged bunting. I want to fill the shape with a paper that I made. I used a clipping mask with has worked fine except for it doesnt fill the stroke which means the paper doesnt go into the the scalloped edges and its just a triangle shape.
Any work-arounds for this in Illustrator other than taking it into another suite application?
I want to insert the blue shape into the iphone shape. I've clicked on clippin mask > make but it is not working. The iphone layer is "Clipping Path" and the blue shape layer is "Path". I've also tried to invert the order of the two layers but its not working either.
View 1 Replies View RelatedI'm making a realistic looking customizer (similar to NikeiD and Reebok YOUR). I used the pen tool and pathfinder to make each zone (shape). After I made all the zones I used the clipping mask on every zone to include the photo of the pad so the colored zone looks realistic.
However, once I make the clipping mask on all the zones, about a 1px gap appears between all the zones. How do I fix this so there is no gap between the zones (fyi: I used the divide and trim pathfinder tool so there is no space between the zones in outline view)?
PS: I'm aware that I can turn off anti-aliasing in the preferences, but that doesn't slove the problem for web, only print.
Below is an example of what I'm talking about.
How to Resize Clipping Mask but not contents
View 7 Replies View RelatedWhen i do clipping mask in illustrator CS5 and exported to WMF, it does not comes like vector image. The clipping mask area becomes blurred when exported to WMF.
View 8 Replies View RelatedI have a logo made up of multiple (5) polygons. I see how to use one of the polygons to create a clipping mask but haven't been able to figure out whether (and how) to use all 5.
Can you use multiple polygons as a clipping mask? Or any other method to produce the same effect?
How does one go about creating a layer clipping mask using the SDK?What I want to do is to simulate clicking on the "Make/Release Clipping Mask" button (the left-most picture button) that is at the bottom of the Layers Panel.
View 2 Replies View RelatedI am trying to make a gear have that nice mettalic shine using the clipping mask, but everytime I make the command the whole thing just dissapears. I am using the pen tool to make 4 triangles with different shades of grey. I then group the triangles, put a radial blur on them and place them under the gear that I created. I select them all and do the clipping mask command, but instead of it being a gear with that radial shine, the whole thing disappears except for the outline of the triangle.
View 6 Replies View RelatedI recently upgraded from Illustrator CS3 to Illustrator CS5.
In CS3, I was able to: Create a clipping mask to hide a portion of the graphic.Set the crop area to match the clipping mask.Export the graphic to a PNG file, with only the portion of the graphic included in the crop area displayed.
In CS5, Converted the crop area to an artboard.The clipping mask is already in place, so no changes there.Set the artboard to match the clipping mask.Attempt to export to a PNG file, but the PNG file automatically contains the entire graphic, not just the area included in the artboard.
I found a workaround online, but it involves flattening the transparency, ungrouping the object and then manually deleting the portions of the graphic that we don't want/need. While this works, it's not a viable solution because I need the ability to go back and make modifications to the original graphic if needed.
I want to copy objects from illustrator to use in photoshop, but the eps file that i am working in has a clipping mask and when i attempt to copy objects in that file from illustrator 6 to photoshop 6, portions (in some cases) all of the object turns black or gray. I'm sure this is a simple noob error (hope my question is clear enough), and it's driving me nuts. I have searched for solutions using terms "clipping mask, black, copy, move, illustrator, photoshop, etc."
Here are the print screens to show you what i get in ai and ps -
(see blue outlined oval object selected - opaque white gradient)
(when moved to ps, opaque whitish oval turns black)
Why is it sometimes a clipping mask produces jagged lines? I know if there's a dark background and a light one sitting on top of it, then this happens. is there a solution to clearing this out when applying a mask?? You can see in the screenshot I've circled where you see the jagged lines and in the layers palette you can see the clipping mask object.
View 37 Replies View Related