I have a simple shape that doesn't work with the width tool. I have other shapes in my doc that work fine, even ones with gradient fills. What is wrong with this one shape?
Here is the image. [URL]
Am I the only one who has edited a stroke with the stroke width tool, then outlined the stroke only to find a countless number of points and noticeably unsmooth edges? Is there a setting or certain way to ensure that the stroke width tool won't corrupt the smoothness of my shapes? The stroke width tool is the most handy new feature I can imagine, but this problem makes it almost entirely useless, unless designing something where precision and smoothness are not important.
View 6 Replies View RelatedI have a pre-existing graphic uses a stroke with variable with profile (I think) or a special brush to make it look like it's hand drawn. I'd like to apply the same effect to a few new illustrations to keep the style consistent. For whatever reason when I ungroup the graphic and select one of the paths, the stroke weight and variable width profile remain disabled (see pasted toolbar graphic below). The brush still says "Basic" despite the fact that visually it is certainly not the basic brush.
Selected Path
Toolbar (I realize that it says Group instead of Path, but even if I ungroup again and select the path the same options are disabled).
I frequently used the ctrl key shortcut in illustrator on a PC to temporarily use the selection tool last used. This still works in CC, but I used to be able to toggle selection tools by keeping ctrl held down as before and then toggle selection tools (selection tool - black arrow, and direct selection tool - white arrow) by tapping the shift key. The tool description in the very bottom of the window shows "toggle selection" when I do this, but the toggle selection tool doesn't actually occur.
View 3 Replies View RelatedI have placed a vector icon in Illustrator, it is a png file and the magic wand tool does not work at all.I click the icon and in the fill icon in the bar left, I just see a question mark.
View 4 Replies View RelatedDraw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?
I drew a cured line with the brush tool in illustrator CS5, but when I select the new "width tool" to change the width, it doesn't work.
Here are my steps:
1. Select the paintbrush tool
2. Draw something
3. Select the "width tool"
4. Try to change the width but it won't work.
Since I draw with the paintbrush tool, the "width tool" can be very handy if I can get it to work.
How come the width tool can ne used on a path made by pen tool but not brush strokes? Is a brush stroke not a path??
View 4 Replies View RelatedI have drawn a shape using the Paintbrush tool's new smooth fidelity with a 3 pt stroke. But when I go to use the Varible Width tool it want allow me to modify the line.
View 2 Replies View RelatedI can't believe Illustrator doesn't do this automatically. If you create a stroke profile on one side of the stroke by holding Alt/ Option while dragging with the Width Tool and then mirror the object, the stroke profile doesn't mirror accordingly. You have to go to the Stroke panel and click one of the flipping buttons for each stroke of the mirrored artwork. This makes mirroring complex artwork very time consuming. Mirroring with transform effect doesn't have this problem but this makes the usage and editing of the mirrored object difficult.
I'm just posting this before making a feature request in case I'm missing something. And to check if this problem has been already raised and the feature request made.
Using CS5
Even though the strength of the blur tool has been set to 100%, the image mode is set to RGD, and I'm applying the blur tool to the right layer, it has no effect whatsoever.
View 9 Replies View RelatedThat's the message I'm getting when I try to use text tool.
"Could not complete your request because something prevented the text engine from being initialized."
I tried to reinstall Photoshop and still the same...
I am making a poster but not very experienced with GIMP.I want it to look like this:URL...The perspective tool doesn't work because it makes it unreadable as the text I want to use is quite long - 3 words long.
View 2 Replies View RelatedWhen I use Patch Tool in Normal mode, photoshop leaves a transparent mark on the replacement area.
System Info
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 1995 MHz
Built-in memory: 3067 MB
Free memory: 1758 MB
[code]...
get my pen (Wacom Intuos 2) to work properly with dodge tool like the mouse?It is the dodge effect was made by mouse..It is by the pen (same brush size)
The brush becomes too small and has a hardness effect, not smooth at all. If I size up the brush real large it's still not right (like in lower corner) and it's hard to control because I hardly see the brush movement. Pressing the pen tip on the tablet pen/mouse mode didn't.
Half the time I use TRIM tool vector on top of vector it doesn't work.
I can't seem to figure out why in some cases trim works and in others it simply puts the top object under the bottom one instead of trimming it from the bottom one.
Does same thing in X3 X4 and X5?
I've tried everything from making sure both were filled with solid color - all curves closed, nothing else grouped with them - nothing - sometimes I have to try a couple times doing same thing and it will work, other times not at all - even after trying a save (which sometimes works)
Both top and bottom show on layer one in properties too!
I have PS CS2 & CS3, at first, when I used the pen tool in CS2, it would't do the simulate pressure. When I got CS3, at first I was delighted to see that here the simulate pressure DID work! But after just one use, it my joy collapsed, again the simulate pressure does not work!
View 8 Replies View Relatedi'm using 3ds max 2014, i'd recently installed it, and i've problems with the "conform" tool in the graphite modelling tools. i select the mesh i want to draw on, but the tool doesn't fit my mesh how i want, it just move it around the viewport with no sense. Iwas working in 3ds 2012, and it never happend
View 6 Replies View RelatedIn photoshop CS5, Brush tool doesn't work on an adjustment layer
View 16 Replies View RelatedI still have to go thought all the tools if I hit the b key and the Brush was already selected. Thought the preference of the shift key would work, but know. What preference or cache do I reset or am I missing something.
View 1 Replies View RelatedI having trouble with my new PaintShop Pro X4. The smear tool is not working. I've gone thru all the blend modes and tried each one, to no avail.
View 5 Replies View RelatedI am trying to set a black layer mask and use the eraser tool to edit it. Unfortunately the eraser tool is not responsive. I recently did a round of software updates for CS6.
View 2 Replies View RelatedI have loaded the office copy of Photoshop elements on my computer. It is only being used on one computer. I have tried to log in with my password but when they send the email and I follow the link it can't log me in. I also find the Spot healing Brush tool doesn't work. I have a Windows 7 64 bit.
View 5 Replies View RelatedI'm working on a project that is going to have a lot of differing line weights. I outlined everything, and started using the width tool around the eye and noticed it scaled the width proportionately. The iris sits inside of a clipping mask because it would seem most efficient to be able to adjust the points later down the line if I need to. I would like to avoid having to have the iris, a clipping mask with no stroke, and then the stroke placed on top of everything. Is this possible?
View 1 Replies View RelatedI am looking for any info on scripting the Variable width tool (Javascript).
Background: By adding a gradient to a variable width strock you can create nice 3D looking Shapes (see example)
this is a straight vertical line with varied widths, then hit with a gradient.
Goal: My hope is to write a script that will take a "Profile" or "Shape" and convert it to a Variable width line. (see Example)
The Black line is to have its widths modified
The Red line is how wide the line needs to be.
i have created a stroke with a calligraphy brush. Now i want to make the stroke a bit thinner at some points of the path.
It could be easily done with the width tool but it doesn't work directly on the stroke.
Is there a way to convert the stroke so the thickness of the stroke will be kept at the other points?
I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
View 9 Replies View RelatedAs a pro, I crop all my photos.I normally use the forward arrow to move through each image, but with the crop tool the forward arrow doesn't work for advancing to the next frame.It only adjusts the crop.This is extremely frustrating for me as it slows down my workflow.
Is there a one key shortcut, within the Crop Tool -- that permits us to move forward from frame to frame?I wish the forward key worked for this within the crop tool!
Is there an easy answer or a way to format something in Lightroom -- so I can have a one-key method to advance frames within the Crop tool?
Ive been messing around with the variable width tool, Im not sure I i changed something, I did try to restore defaults but when I make a change it changes the opposite side of the image. For example In screen shot I changed the width on the left and the effect showed up on the right.
I would like the width to change where I change it.
I’m using Adobe Illustrator CS6 with a mouse rather than a pressure graphics tablet.
When I create a stroke using the Paint brush tool I would like the stroke to contain a variable width profile. For example narrower at the beginning and end of the stroke but thicker in the middle. Now I can do this by selecting the line after I have made the stroke and choosing the Basic Brush Definition from the drop down list. But if i try to draw a new line the settings are reset again. I cannot create a variable stroke while creating the stroke. The brush definition keeps resetting to 5 pt Round and stroke width 1 pt. It would be much quicker if the stroke remained as a varying width profile as I created the strokes.
I noticed the same problem with the blob brush tool except it's even worse. With the blob brush tool the stroke weight always resets regardless of whether or not I try to set a Variable width profile.
I tried deselecting "New Art has Basic Appearance" mentioned on another forum but that didn't work.
[URL]
Notice the variable width profile is maintained as the artists draws. It doesn’t keep resetting.
I've just installed Extension Manager Update 6.0.5.9 yesterday and today I've get a wired problem with my bambo tablet.I've used this tablet for 3-4 years without problem. The problem I've now is when I drag lasso tool on an image to make selection it doesn't make a selection even it is showed in the history state that I've used lasso,or magnetic lasso.
My machine is a Mac Pro 2010,Quad-Core Intel Xeon running on Lion 10.7.5 and my bamboo driver is the latest version 5.3.2-2. Even now I've change to use freeform path I've still cannot change form path to selection.