Illustrator :: Toggle Selection Tool Doesn't Work In CC
Jul 9, 2013
I frequently used the ctrl key shortcut in illustrator on a PC to temporarily use the selection tool last used. This still works in CC, but I used to be able to toggle selection tools by keeping ctrl held down as before and then toggle selection tools (selection tool - black arrow, and direct selection tool - white arrow) by tapping the shift key. The tool description in the very bottom of the window shows "toggle selection" when I do this, but the toggle selection tool doesn't actually occur.
View 3 Replies
ADVERTISEMENT
Nov 21, 2011
Searched the net and did find some official tutorials where its says the Poly mode could be toggled. Like hitting "2" once switches Edge and hitting twice toggles poly mode "off". But I don't find the option where it can be set.
View 3 Replies
View Related
Aug 24, 2012
I have a simple shape that doesn't work with the width tool. I have other shapes in my doc that work fine, even ones with gradient fills. What is wrong with this one shape?
Here is the image. [URL]
View 4 Replies
View Related
Aug 4, 2012
I have placed a vector icon in Illustrator, it is a png file and the magic wand tool does not work at all.I click the icon and in the fill icon in the bar left, I just see a question mark.
View 4 Replies
View Related
Jan 31, 2014
Draw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?
View 3 Replies
View Related
Dec 21, 2012
Any way to select art (on a artboard) and then use toggle the selection of the layers in you want to.... lets say colect in a layer? Collect in Layer is a command in the Layers panel flyout. It seems so tiedious to have to select each layer manualy that you have selected already on the artboard.
View 2 Replies
View Related
Aug 22, 2012
This morning, my Selection Tool (the filled-in arrow) is acting like a Direct Selection Tool (the hollow arrow), but only when I click and drag on a group. It ends up select the anchors within the group rather than the whole group itself.
I've checked my preferences, quit and relaunched Illustrator a few times, and nothing seems to fix it. The problem briefly went away a few minutes ago, but came back when I quit and relaunched for good measure.
It's happening in Illustrator CS 5.1. I have CS6, and that version works fine, but I'm waiting on some plugins to be updated for it, so I'd like to use CS 5.1. I'm also running the latest Suitcase Fusion 4.
View 2 Replies
View Related
Sep 29, 2012
In Elements 9 when I am doing the frame and click to commit my frame disappears and I quick selection tool on the Guided section does not work.
View 1 Replies
View Related
Oct 4, 2013
Using the selection tool i should be able tp reduce or shrink the size of the box or an image as a whole without changing the format. Iam not able to do that. I think i disabled something in my illustrator.
View 2 Replies
View Related
Jul 14, 2009
Even though the strength of the blur tool has been set to 100%, the image mode is set to RGD, and I'm applying the blur tool to the right layer, it has no effect whatsoever.
View 9 Replies
View Related
Oct 12, 2008
That's the message I'm getting when I try to use text tool.
"Could not complete your request because something prevented the text engine from being initialized."
I tried to reinstall Photoshop and still the same...
View 3 Replies
View Related
Feb 13, 2012
I am making a poster but not very experienced with GIMP.I want it to look like this:URL...The perspective tool doesn't work because it makes it unreadable as the text I want to use is quite long - 3 words long.
View 2 Replies
View Related
Jun 1, 2012
When I use Patch Tool in Normal mode, photoshop leaves a transparent mark on the replacement area.
System Info
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 1995 MHz
Built-in memory: 3067 MB
Free memory: 1758 MB
[code]...
View 2 Replies
View Related
Oct 2, 2011
get my pen (Wacom Intuos 2) to work properly with dodge tool like the mouse?It is the dodge effect was made by mouse..It is by the pen (same brush size)
The brush becomes too small and has a hardness effect, not smooth at all. If I size up the brush real large it's still not right (like in lower corner) and it's hard to control because I hardly see the brush movement. Pressing the pen tip on the tablet pen/mouse mode didn't.
View 2 Replies
View Related
Jun 11, 2011
Half the time I use TRIM tool vector on top of vector it doesn't work.
I can't seem to figure out why in some cases trim works and in others it simply puts the top object under the bottom one instead of trimming it from the bottom one.
Does same thing in X3 X4 and X5?
I've tried everything from making sure both were filled with solid color - all curves closed, nothing else grouped with them - nothing - sometimes I have to try a couple times doing same thing and it will work, other times not at all - even after trying a save (which sometimes works)
Both top and bottom show on layer one in properties too!
View 14 Replies
View Related
Jan 10, 2008
I have PS CS2 & CS3, at first, when I used the pen tool in CS2, it would't do the simulate pressure. When I got CS3, at first I was delighted to see that here the simulate pressure DID work! But after just one use, it my joy collapsed, again the simulate pressure does not work!
View 8 Replies
View Related
Aug 10, 2013
i'm using 3ds max 2014, i'd recently installed it, and i've problems with the "conform" tool in the graphite modelling tools. i select the mesh i want to draw on, but the tool doesn't fit my mesh how i want, it just move it around the viewport with no sense. Iwas working in 3ds 2012, and it never happend
View 6 Replies
View Related
Sep 3, 2013
In photoshop CS5, Brush tool doesn't work on an adjustment layer
View 16 Replies
View Related
Feb 14, 2013
I still have to go thought all the tools if I hit the b key and the Brush was already selected. Thought the preference of the shift key would work, but know. What preference or cache do I reset or am I missing something.
View 1 Replies
View Related
Nov 8, 2011
I having trouble with my new PaintShop Pro X4. The smear tool is not working. I've gone thru all the blend modes and tried each one, to no avail.
View 5 Replies
View Related
Oct 12, 2012
I am trying to set a black layer mask and use the eraser tool to edit it. Unfortunately the eraser tool is not responsive. I recently did a round of software updates for CS6.
View 2 Replies
View Related
Aug 13, 2013
I have loaded the office copy of Photoshop elements on my computer. It is only being used on one computer. I have tried to log in with my password but when they send the email and I follow the link it can't log me in. I also find the Spot healing Brush tool doesn't work. I have a Windows 7 64 bit.
View 5 Replies
View Related
Sep 27, 2012
I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
View 9 Replies
View Related
Feb 4, 2013
As a pro, I crop all my photos.I normally use the forward arrow to move through each image, but with the crop tool the forward arrow doesn't work for advancing to the next frame.It only adjusts the crop.This is extremely frustrating for me as it slows down my workflow.
Is there a one key shortcut, within the Crop Tool -- that permits us to move forward from frame to frame?I wish the forward key worked for this within the crop tool!
Is there an easy answer or a way to format something in Lightroom -- so I can have a one-key method to advance frames within the Crop tool?
View 2 Replies
View Related
Sep 21, 2013
I don't understand if the problem is the same of this: [URL]
Any way i do not understand with after using -convert point tool- the tool -Direction tool- (2) do not leave me to manage both the direction handles (3). I try to upload a screenshot:
(1): how work Direction tool (it moves both the direction handles).
View 8 Replies
View Related
Feb 1, 2013
I've just installed Extension Manager Update 6.0.5.9 yesterday and today I've get a wired problem with my bambo tablet.I've used this tablet for 3-4 years without problem. The problem I've now is when I drag lasso tool on an image to make selection it doesn't make a selection even it is showed in the history state that I've used lasso,or magnetic lasso.
My machine is a Mac Pro 2010,Quad-Core Intel Xeon running on Lion 10.7.5 and my bamboo driver is the latest version 5.3.2-2. Even now I've change to use freeform path I've still cannot change form path to selection.
View 1 Replies
View Related
Feb 27, 2014
I get an error telling me that in order to access help, I need to be connected to the internet. I AM connected to the internet (otherwise, I would not be able to post this question). All I am trying to figure out is where in the heck "Text Wrap" moved to since I cannot find it under "Window" or "Text," but realizing I have NO access to help in the program suddenly made THAT the bigger issue here. Do I need to trash my preferences file or something? I'm on a Mac, running Mountain Lion, Illustrator CS6.
View 1 Replies
View Related
Feb 3, 2014
I have tried saving my project as a PDF so that I can send to different people and print, but no matter which PDF options I chose in Illustrator's final step for saving as PDF I end up getting a PDF with nothing on it! It turns up as a blank page. If I do get a visible PDF it stays that way for only a few minutes and prints out in reversed colours!! This is bissare. Some Preferences or something of mine are wack??
View 1 Replies
View Related
Oct 28, 2013
my Illustrator CS6 (64) denies any service since a month, but (32) is functioning perfectly .
View 3 Replies
View Related
Nov 25, 2013
Illustrator CC does not work with the Photoshop layers?Can not adjust layer visibility.
View 4 Replies
View Related
Mar 23, 2013
I have a masked area in my illustration. When I copy & paste it into PS the mask doesn't work. It doesn't matter if i paste as pixel or smart object. Even in AI when I copy and paste it to another file the mask fails to work.
View 4 Replies
View Related
