Photoshop :: Tablet Pen Doesn't Work Right With Dodge Tool

Oct 2, 2011

get my pen (Wacom Intuos 2) to work properly with dodge tool like the mouse?It is the dodge effect was made by mouse..It is by the pen (same brush size)

The brush becomes too small and has a hardness effect, not smooth at all. If I size up the brush real large it's still not right (like in lower corner) and it's hard to control because I hardly see the brush movement. Pressing the pen tip on the tablet pen/mouse mode didn't.

View 2 Replies


ADVERTISEMENT

Photoshop :: Dodge Tool Won't Work

Sep 12, 2007

I am using PS 5.5 to work on a .tif file scanned from a photo negative of a building. The dodge tool & burn tool do not work, even when I set the exposure to 100%. The history palette shows "dodge tool" each time I click in the image, but nothing happens. I tried these tools in a another similar file & both dodge & burn work fine. What could cause these tools not to work?

View 2 Replies View Related

Photoshop :: CS6 Crashes When Using Burn Tool / Crop Tool And Dodge Tool?

Oct 1, 2012

Just recently upgraded from Photoshop CS5.5 64bit to Photoshop CS6 64 bit. Crashes when using burn tool, crop tool, or dodge tool?

View 2 Replies View Related

Photoshop :: Why Doesn't The Blur Tool EVER Work?

Jul 14, 2009

Even though the strength of the blur tool has been set to 100%, the image mode is set to RGD, and I'm applying the blur tool to the right layer, it has no effect whatsoever.

View 9 Replies View Related

Photoshop :: Text Tool Doesn't Work.

Oct 12, 2008

That's the message I'm getting when I try to use text tool.

"Could not complete your request because something prevented the text engine from being initialized."

I tried to reinstall Photoshop and still the same...

View 3 Replies View Related

CorelDRAW Graphics Suite X6 :: Pressure Tablet Doesn't Apply Pressure Using Pencil Tool?

May 20, 2012

My pressure tablet doesn't apply pressure using the pencil tool -- or any other tool-- It's a CTH470 Bamboo.

View 5 Replies View Related

Photoshop :: CS6 Patch Tool Doesn't Work Correctly

Jun 1, 2012

When I use Patch Tool in Normal mode, photoshop leaves a transparent mark on the replacement area.

System Info
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 1995 MHz
Built-in memory: 3067 MB
Free memory: 1758 MB
[code]...

View 2 Replies View Related

Photoshop :: Pen Tool Simulate Pressure Doesn't Work

Jan 10, 2008

I have PS CS2 & CS3, at first, when I used the pen tool in CS2, it would't do the simulate pressure. When I got CS3, at first I was delighted to see that here the simulate pressure DID work! But after just one use, it my joy collapsed, again the simulate pressure does not work!

View 8 Replies View Related

Photoshop :: CS5 / Brush Tool Doesn't Work On Adjustment Layer

Sep 3, 2013

In photoshop CS5, Brush tool doesn't work on an adjustment layer

View 16 Replies View Related

Photoshop :: Preference For Shift Key With Tool Switching Doesn't Work

Feb 14, 2013

I still have to go thought all the tools if I hit the b key and the Brush was already selected.  Thought the preference of the shift key would work, but know. What preference or cache do I reset or am I missing something.

View 1 Replies View Related

Photoshop :: Paint, Erase, Burn And Dodge Won't Work...

Jan 6, 2009

I create an adjustment layer and then want to erase part of that layer, nothing is happening. I've tried painting to lighten or darken and tried the burn and dodge tool, but nothing happens.

What have I missed? I'm working just the same as in CS3, but with no results.

View 20 Replies View Related

Photoshop :: Eraser Tool Doesn't Work For Black Layer Mask

Oct 12, 2012

I am trying to set a black layer mask and use the eraser tool to edit it.  Unfortunately the eraser tool is not responsive.  I recently did a round of software updates for CS6. 

View 2 Replies View Related

Photoshop Elements :: Spot Healing Brush Tool Doesn't Work

Aug 13, 2013

I have loaded the office copy of Photoshop elements on my computer. It is only being used on one computer. I have tried to log in with my password but when they send the email and I follow the link it can't log me in. I also find the Spot healing Brush tool doesn't work. I have a Windows 7 64 bit.

View 5 Replies View Related

Photoshop :: Clone, Brush, Burn-dodge Tools Don't Work

Aug 22, 2005

Photoshop 7. Clone tool (etal) won't work. I've verified I am in RGB mode, and the 'Aligned' box is unchecked. Since the background layer is locked, I duplicated the background and tried working in the unlocked layer. Still no luck. These tools were working fine before, and sometimes when I open PS they do. Other times, like now, they are inaccessible.

View 5 Replies View Related

GIMP :: Perspective Tool Doesn't Work

Feb 13, 2012

I am making a poster but not very experienced with GIMP.I want it to look like this:URL...The perspective tool doesn't work because it makes it unreadable as the text I want to use is quite long - 3 words long.

View 2 Replies View Related

Photoshop :: Dodge Tool

Jun 17, 2009

What does the dodge tool do?

What does dodging mean?

Is there some link that explains what each tool does in somewhat simple language?

View 1 Replies View Related

CorelDRAW X4 :: Use TRIM Tool On Top Of Vector Doesn't Work

Jun 11, 2011

Half the time I use TRIM tool vector on top of vector it doesn't work.

I can't seem to figure out why in some cases trim works and in others it simply puts the top object under the bottom one instead of trimming it from the bottom one.

Does same thing in X3 X4 and X5?

I've tried everything from making sure both were filled with solid color - all curves closed, nothing else grouped with them - nothing - sometimes I have to try a couple times doing same thing and it will work, other times not at all - even after trying a save (which sometimes works)

Both top and bottom show on layer one in properties too!

View 14 Replies View Related

3ds Max Modeling :: 2014 Conform Tool Doesn't Work?

Aug 10, 2013

i'm using 3ds max 2014, i'd recently installed it, and i've problems with the "conform" tool in the graphite modelling tools. i select the mesh i want to draw on, but the tool doesn't fit my mesh how i want, it just move it around the viewport with no sense. Iwas working in 3ds 2012, and it never happend

View 6 Replies View Related

Illustrator :: Width Tool Disabled / Doesn't Work?

Aug 24, 2012

I have a simple shape that doesn't work with the width tool. I have other shapes in my doc that work fine, even ones with gradient fills. What is wrong with this one shape?
 
Here is the image. [URL]

View 4 Replies View Related

Illustrator :: Toggle Selection Tool Doesn't Work In CC

Jul 9, 2013

I frequently used the ctrl key shortcut in illustrator on a PC to temporarily use the selection tool last used. This still works in CC, but I used to be able to toggle selection tools by keeping ctrl held down as before and then toggle selection tools (selection tool - black arrow, and direct selection tool - white arrow) by tapping the shift key. The tool description in the very bottom of the window shows "toggle selection" when I do this, but the toggle selection tool doesn't actually occur.

View 3 Replies View Related

Illustrator :: Magic Wand Tool Doesn't Work

Aug 4, 2012

I have placed a vector icon in Illustrator, it is a png file and the magic wand tool does not work at all.I click the icon and in the fill icon in the bar left, I just see a question mark.

View 4 Replies View Related

Photoshop :: Magnetic Lasso Tool Doesn't Work After Installing Adobe Extension Manager Update

Feb 1, 2013

I've just installed Extension Manager Update 6.0.5.9 yesterday and today I've get a wired problem  with my bambo tablet.I've used this tablet for 3-4  years without problem. The problem I've now is when I drag lasso tool on an image to make selection it doesn't make a selection even it is showed in the history state that I've used lasso,or magnetic lasso.

My machine is a Mac Pro 2010,Quad-Core Intel Xeon running on Lion 10.7.5 and my bamboo driver is the latest version 5.3.2-2. Even now I've change to use freeform path I've still cannot change form path to selection.

View 1 Replies View Related

Photoshop :: Dodge Tool / Upgraded To 5.5

Apr 18, 2012

I upgraded to PS 5.5 on my Mac I've had this problem with the dodge tool.I can change hrd/softness fine, but now way will the little 'tails' at either end of the stroke disappear, whether shape dynamics is switched on or off, All I want is to be able to have a fading stroke, not a fade and taper.

View 4 Replies View Related

Corel PHOTO-PAINT X4 :: Smear Tool Doesn't Work

Nov 8, 2011

I having trouble with my new PaintShop Pro X4. The smear tool is not working. I've gone thru all the blend modes and tried each one, to no avail.

View 5 Replies View Related

Illustrator :: Pencil Tool In 17.1 - Closed Path Doesn't Work

Jan 31, 2014

Draw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
 
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?

View 3 Replies View Related

Photoshop :: Why Did CS2 Dodge Tool Stop Working As Set

Mar 21, 2013

CS2 dodge tool stopped working as set, yet Burn, Sponge, Clone Tools all work; dodge tool leaves centered white specks if clicked multiple times; all my CS1 tools work; all my CS2 & CS1 tool settings are same (0 hardness, 20% exposure), rebooting does not fix; Is it possible to create this problem by accidentally typing Shift, Alt or Ctrl "," or "." or similar whilst using CS2 Dodge Tool?

View 3 Replies View Related

Photoshop :: Dodge Tool Brush Area

Jan 18, 2008

CS3, Windows XP, 5.1.2600 Service Pack 2 Build 2600, System Model: E-4500S, System Type: X86-based PC x86 Family 15 Model 6 Stepping 4 GenuineIntel ~2799 Mhz

Regardless of the brush diameter or hardness when using the dodge tool to lighten an area of a photograph, it only lightens a very small area in the center of the brush and then only after repeated clicks. The burn tool seems to operate as normal (the whole area of the brush regardless of diameter).

View 10 Replies View Related

Photoshop Elements :: How To Use Dodge Tool With RAW File

Aug 6, 2013

Looking to start using RAW files more often to process my images.
 
Tried to use the dodge tool with a RAW file over the weekend and recieved a notification saying somthing along the lines of "Cannot use this function with a 16bit file, must convert to 8bit"
 
I also recieved a similar message when trying to use the magic brush tool.
 
I would like to be able to adjust exposure, color, contrast (clarity) etc. when working with a RAW file. Would like to be able to adjust these parameters using the select tool, and would also like to be able to "brush" theses adjusments on. Also, if there is a Gradual ND filter function available, i would like to know where to find it.
 
Is it possible to do these things (with a RAW image) using PSE? If so, how?
 
Or do I have to purchase Lightroom if i want to work with RAW images?

View 1 Replies View Related

Photoshop :: How To Use Burn / Dodge Tool In Pencil Mode

Feb 10, 2013

Photoshop :: How to use burn / dodge tool in pencil mode

View 1 Replies View Related

Photoshop Elements :: Dodge Tool - Whitening The Background?

Mar 29, 2013

I'm using Photoshop Elements 10 -dodge tool to whiten the background of my product pictures. I highlight the background all white, and upload the pic to my website. The next day some spots in the background goes back to gray.
 
Here is a sample picture with the same problem:[URL]

View 5 Replies View Related

AutoCAD Dynamic Blocks :: Block With Field Doesn't Work If Paste From Tool Pallet

Sep 27, 2012

I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved