I am making a poster but not very experienced with GIMP.I want it to look like this:URL...The perspective tool doesn't work because it makes it unreadable as the text I want to use is quite long - 3 words long.
View 2 RepliesThat option seems to cause the corners to snap to some other points which aren't the grid, and making vertical lines impossible.
Is there a way to make it use the grid just like how the rectangle select tool does?
I get to the warpping effect it seams photoshop offers more grid points than the perspective tool of GIMP. Any alternative technique or tool to accomplish this effect?
What I am trying to accomplish is to cut and paste a section of nail and lay it over the knotted rope but with only 4 grid points this does not cut it.
Even though the strength of the blur tool has been set to 100%, the image mode is set to RGD, and I'm applying the blur tool to the right layer, it has no effect whatsoever.
View 9 Replies View RelatedThat's the message I'm getting when I try to use text tool.
"Could not complete your request because something prevented the text engine from being initialized."
I tried to reinstall Photoshop and still the same...
When I use Patch Tool in Normal mode, photoshop leaves a transparent mark on the replacement area.
System Info
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 1995 MHz
Built-in memory: 3067 MB
Free memory: 1758 MB
[code]...
get my pen (Wacom Intuos 2) to work properly with dodge tool like the mouse?It is the dodge effect was made by mouse..It is by the pen (same brush size)
The brush becomes too small and has a hardness effect, not smooth at all. If I size up the brush real large it's still not right (like in lower corner) and it's hard to control because I hardly see the brush movement. Pressing the pen tip on the tablet pen/mouse mode didn't.
Half the time I use TRIM tool vector on top of vector it doesn't work.
I can't seem to figure out why in some cases trim works and in others it simply puts the top object under the bottom one instead of trimming it from the bottom one.
Does same thing in X3 X4 and X5?
I've tried everything from making sure both were filled with solid color - all curves closed, nothing else grouped with them - nothing - sometimes I have to try a couple times doing same thing and it will work, other times not at all - even after trying a save (which sometimes works)
Both top and bottom show on layer one in properties too!
I have PS CS2 & CS3, at first, when I used the pen tool in CS2, it would't do the simulate pressure. When I got CS3, at first I was delighted to see that here the simulate pressure DID work! But after just one use, it my joy collapsed, again the simulate pressure does not work!
View 8 Replies View Relatedi'm using 3ds max 2014, i'd recently installed it, and i've problems with the "conform" tool in the graphite modelling tools. i select the mesh i want to draw on, but the tool doesn't fit my mesh how i want, it just move it around the viewport with no sense. Iwas working in 3ds 2012, and it never happend
View 6 Replies View RelatedI have a simple shape that doesn't work with the width tool. I have other shapes in my doc that work fine, even ones with gradient fills. What is wrong with this one shape?
Here is the image. [URL]
I frequently used the ctrl key shortcut in illustrator on a PC to temporarily use the selection tool last used. This still works in CC, but I used to be able to toggle selection tools by keeping ctrl held down as before and then toggle selection tools (selection tool - black arrow, and direct selection tool - white arrow) by tapping the shift key. The tool description in the very bottom of the window shows "toggle selection" when I do this, but the toggle selection tool doesn't actually occur.
View 3 Replies View RelatedI have placed a vector icon in Illustrator, it is a png file and the magic wand tool does not work at all.I click the icon and in the fill icon in the bar left, I just see a question mark.
View 4 Replies View RelatedToday I downloaded last version - Gimp 2.8 and when I wandted to use eyedropper tool in color dialog, I found out that it doesn´t work. So I uninstaled it and downloaded it again. But it doesn´t work too.I´m on Windows XP SP3.
View 6 Replies View RelatedIn photoshop CS5, Brush tool doesn't work on an adjustment layer
View 16 Replies View RelatedI still have to go thought all the tools if I hit the b key and the Brush was already selected. Thought the preference of the shift key would work, but know. What preference or cache do I reset or am I missing something.
View 1 Replies View RelatedI having trouble with my new PaintShop Pro X4. The smear tool is not working. I've gone thru all the blend modes and tried each one, to no avail.
View 5 Replies View RelatedDraw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?
I am using the latest version of GIMP on my windows 7 pc but color to alpha doesn't work. At my pc at work it works fine but i use windows xp there and i have ghostscript and python installed.
Or is it something completely different?
I am trying to set a black layer mask and use the eraser tool to edit it. Unfortunately the eraser tool is not responsive. I recently did a round of software updates for CS6.
View 2 Replies View RelatedI have loaded the office copy of Photoshop elements on my computer. It is only being used on one computer. I have tried to log in with my password but when they send the email and I follow the link it can't log me in. I also find the Spot healing Brush tool doesn't work. I have a Windows 7 64 bit.
View 5 Replies View RelatedI have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
View 9 Replies View RelatedAs a pro, I crop all my photos.I normally use the forward arrow to move through each image, but with the crop tool the forward arrow doesn't work for advancing to the next frame.It only adjusts the crop.This is extremely frustrating for me as it slows down my workflow.
Is there a one key shortcut, within the Crop Tool -- that permits us to move forward from frame to frame?I wish the forward key worked for this within the crop tool!
Is there an easy answer or a way to format something in Lightroom -- so I can have a one-key method to advance frames within the Crop tool?
I've just installed Extension Manager Update 6.0.5.9 yesterday and today I've get a wired problem with my bambo tablet.I've used this tablet for 3-4 years without problem. The problem I've now is when I drag lasso tool on an image to make selection it doesn't make a selection even it is showed in the history state that I've used lasso,or magnetic lasso.
My machine is a Mac Pro 2010,Quad-Core Intel Xeon running on Lion 10.7.5 and my bamboo driver is the latest version 5.3.2-2. Even now I've change to use freeform path I've still cannot change form path to selection.
I'm looking at tutorials on how to add strokes to text (I downloaded it today) and they say to use the color select tool. In their demonstration, when they select text, it has the normal dotted lines around it. For me, when I click it just has a thick border around it and it tells me to move my mouse to change the threshold. It won't select the text, just change the threshold when moving my mouse from left to right.
View 1 Replies View RelatedI need to do a small bit of horizon straightening on an image which I have.
Using the rotation tool is fair enough.
Under clipping I select crop to result.
In the rotation dialog i enter the angle ( -.7 )
When I click rotate, it goes through the motions of a status bar advancing (green bar), but when it is finished doing its thing the image vanishes entirely, and i'm left with what looks like a transparent background.
If in clipping, I select 'Adjust', it rotates fine but I have to crop the result manually to have the image 'square' with no transparent angled edges.
How the rotation tool works? I'm using Gimp 2.6.4 on Windows Vista.
I'm working on a sticker with a Big Ben style clock on it. I've created it using the 2-point perspective ability in Illustrator. Unfortunately, I've decided that I want it to feel "taller" than when I started, so I need to shift the perspective. However, when I use the Perspective Grid Tool and adjust the ground or horizon line, it only adjusts the grid, not the artwork. Is there a way to have the artwork adjust with the grid so that I can move the artwork around in 3D space to find the right perspective?
View 3 Replies View RelatedI could not click on the Perspective Box when I used the Crop tool. What do I need to do?
View 2 Replies View RelatedWhat happened to PERSPECTIVE when I use the CROP tool?
View 1 Replies View RelatedI can't figure out why the selection tool won't work. When active, I can't grab an object to move it and the icon next to the selection arrow is a line with an arrow pointing to the left, like this
View 1 Replies View RelatedI'm using CD X5, (I own it, not the trial download) and the Effects/Add Perspective menu choice is greyed out. ! Not selectable. I select the photo I want to change persp but the option is not available. I did reset the interface by pressing F8 upon load and it did change to default but still no perspective option.
Win 7 home Premium 64bit
I should add that this is the Home - Student version. Should that be any different? Nothing else has been ... yet anyway!