I have loaded the office copy of Photoshop elements on my computer. It is only being used on one computer. I have tried to log in with my password but when they send the email and I follow the link it can't log me in. I also find the Spot healing Brush tool doesn't work. I have a Windows 7 64 bit.
View 5 RepliesI ust PS CS5, Windows 7 64 bit, i7 processor, 16 gb of ram
My spot healing brush doesn't drage. The healing brush and all other brushes work normally. Before yesterday it was woking normally. The brush will make a round patch the size of the brush, but I can't paint with the brush.
My Spot Healing Brush Tool wont drag at all, yes I have tried resetting the Tool. I am wondering if its because my Graphics card is integrated(Laptop)?
View 1 Replies View RelatedBoth of subject tools often 'go wild' on me when I am working on an image. Either tool will race across an image in a straight line and leave either a cloning or spotting mark [straight line]. I suspect this has something to do with insufficient memory. However I have 4 GB RAM and am not running any other big program while doing the cloning/spotting. Even if I 'give it some rest' this strange behavior will continue. Any help would be greatly appreciated! christian ps. Attached is a tiny sample, circled in red.
View 4 Replies View RelatedI can't use the spot healing brush. Whenever I try, a little notice appears at the bottom of my screen that says there are new capabilities available for the spot healing brush "click here". I've clicked and all it was is a tutorial video. I've watched the video numerous times, but the notice still will not go away. How do I get the use of my spot healing brush back?
View 1 Replies View RelatedTried to remove some cables from an image using Russel Brown's video making use of the pen tool/path and the spot healing brush with content aware. I'm pretty sure I followed his tutorial exactly but it did not work satisfactorily. Are there any other tweaks I should be using to remove these cables and replace them with the background details?
View 17 Replies View RelatedWhen I use the spot healing brush, streaks or lines occur? How do I stop this. It usually happens when my picture has a strong contrast in colors between the background and the person's clothing or face..
View 7 Replies View RelatedI have been using PSE 11 (version 11.0) for several months on 27" iMac with OS X Lion (version 10.7.5). One of my favorite tools is the spot healing brush with content aware option. For some reason it suddenly stopped working! The black circle doesn't appear when I click my mouse. I have reset the tool to no avail.
View 2 Replies View RelatedI'm making a timelapse, and want to remove dust from certain scenes. I found a pretty neat tut from Angie Taylor [URL] which I tried MANY times following here instructions. After numerous failing attempts I would like to know why this don't work.
View 5 Replies View Relatedi am wondering to add the Spot healing brush tool to lightroom so that i can clone some parts of the photo without moving to Photoshop.
View 3 Replies View Relatedadobe photoshop elements 9 , i cannot get the circle to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .
View 1 Replies View RelatedHow to get the most out of the Spot Healing Brush? I'm using it in Photoshop CC to repair old photos. It tends to work about half the time the way I would want it to. Frequently, I have to back out "fixes" and either try again from a different direction or switch to the clone stamp tool.
So, how does one get the most out of the Spot Healing Brush?
I am working with PSCS6 CC. When using the healing brush in content aware or proximity mode the tool generates artifacts.
What is causing this behavior and how can it be prevented?
Here's a before and after shot. I recently upgraded from CS3 and the spot healing brush always worked great. Now when I use it, whether or not I use content aware fill, it leaves a blurred residue of what I was trying to remove. As an aside, the Content Aware Fill leaves a similar residue, enough to make it effectively unusable.
I have included a sample photo of the spot healing brush problem. Left side is before and right side is after. I just wanted to get rid of the electrical wall socket. You can see that it's not working. I am running windows 8 in a 64-bit environtment and running the 64-bit version of Photoshop CS5.5
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
[code]....
As pointed out in the thread subject line, both the clone stamp tool and healing brush are not working for me in Photo Elements 7.When I am attempting to use it, I get the message: "Could not use clone stamp tool because the area to clone has not been defined". Well, this is not the case since I did define it with command Alt + left mouse click.
Background:Photo Elements 7 is installed in Windows XP Professional SP3. The latter runs as a virtual O/S with Sun VirtualBox on host SuSE Linux 11.1 (Gnome).
I'm on Win 7, 64 bit, and CS6 (released). I've got the Spot Healing brush active and I Shift + Right-click to bring up the Blending options. I cannot change to Luminosity. It will change in the drop down box on the tool bar however.
When I first noticed, it was Lighten that it wouldn't change to. I've rebooted the PC a couple of times and now it seems to be the Luminosity mode.
I'm using CS6 and while using my new wacom small tablet, I noticed that no matter what I do, I can't disable the pressure sensitivity for the "Spot Healing Brush". All my other tools i can. I'm not confortable using the pressure sensitivity to make the brush larger so i just prefer to turn off the sensitivity entirely.
View 5 Replies View Relatedwhy the healing brush is so useless on stroking a path. It always (apparently no matter what setting you use) creates a soft blurred splodge as opposed to - well - what its supposed to do.
I've just spent 2 days creating what is (IMHO) a totally awsome action that highlights moles and skin blemeshis (and does so by finding details, not by colour or brightness so should work on most skin tones), creates a path based on them, and then totally fails to patch them because the implementation of healing brush stroking on paths is so rubbish. THe path created is quite complex of couse, and extends over most of the image, its not like stroking a single path where spot healing appears to work.
THe nearest thing I've got is to create a pattern based on a clean patch of skin and the to use the healing brush set to a pattern. This works OK for this person, but will be rubbish on someone else. I've also tried using the patch tool, which is also no good. Content aware fill also produces the soft blurry splodge.
the 2 screen grab on the right are created by manually using spot healing brush the combination of path creation and stoking with the healing brush could offer up SO much functionality I think adobe should investigate. I've got at least 3 actions now that are waiting to go out the door that will save retouchers hours and hours of boring spotting work. It uses frequency separation, too.
My spot healing brush stopped working. After releasing the mouse, it blinks and remains black. If I do another spot, the first spot is fixed and the second one is black. And so on. This began after updating to 12.0.4 x64 (Mac 10.7.3)*
View 1 Replies View RelatedSpot healing brush "sticking"?
Basically, a substantial portion of the time I hit "Q" I do not get the circle for spot heal. The cursor disappears and I cannot see anything. However, the tool is working, but I can't see its size. If I turn it off and back on I get the crosshairs and thus I can click and hide spots, but I can't see when I grow/shrink it, and I can't see when I move it.
I've seen this with all of the Lightroom 4.1 versions (RC1, RC2, and now GM) on OS X 10.7.4. This is on a Mac Pro with ATI graphics.
i was hoping and waiting for better healing/spot removal brush in LR4... and now i am disappointed . should i wait for LR5?
View 24 Replies View RelatedI'm doing a lot of work cleaning old files up, and trying to stay in Content-Aware mode of spot healing brush. Switching back and forth from Lightroom, I usually find the radio button has switched back to "Create Texture" mode, which I do not want. I leave it in Content-Aware, but it switches on its own. Can't find any way to set it to stay where I put it.
View 6 Replies View RelatedThe spot and healing brush seems to work a little, but then leaves dark smudges or even complete dark lines. Also seems to pick up other objects in the picture as if it is copying a section of the picture. Have tried to reset, but nothing works.
View 8 Replies View RelatedIn photoshop CS5, Brush tool doesn't work on an adjustment layer
View 16 Replies View Relatedget the spot healing tool showing onscreen ,im new and cant seem to find it
View 2 Replies View RelatedHow come sometimes the Clone Stamp Tool doesn't clone, and the Healing Brush doesn't heal.
Sometimes I can get it to work, and sometimes I can't.
Sometimes it works only partially. The thing I want to cover over gets partially obscured behind a translucent clone spot.
On a recent attempt, I had the Healing Brush working, but after I made a selection mask to limit the area to be healed, the Healing Brush no longer worked.
I have Opacity and Flow on 100%. I tried a variety of different Modes. Aligned samples is checked, as Layer is set to Current. Layer is not locked. I am working on the top layer of three layers. I set layer to all three posible options, including Current, and Current and Below. I left Aligned Samples unchecked, and then I checked it.
I Reset the Tool in the configuration drop down menu next to the tool icon in the tool options bar. I Reset All Tools.
What is the logic of the work of the proximity match of the healing brush? How is it work? What is it being done on pixels? is it using the neighboring pixels?
View 2 Replies View Relatedhow to restore damaged photos and one of the most essential tools I need is the healing brush tool BUT it wont work!
I create a new layer by dragging the background image down to the icon in the bottom left hand corner.Then select the healing brush tool, set it to replace, proximity match, opacity to 30%, hardness to 100%, flow to 100% and have aligned ticked.
Because of the disability I used a track ball mouse with a sticky mouse button. So I start to paint with the healing brush, have it clicked down but nothing really happens? The spot healing tool works o.k.ish as does the clone stamp.
I"m running CS4 Extended on a Mac......
i have photoshop cs6 , and i was watching a video about the new lightroom features it was amazing how in this video lightroom v5 brush tool work does cs6 have such feature ? or is included in cc only?
View 11 Replies View RelatedSince I am working in Photoshop 6, I do not see a "healing brush" tool on my toolbox. The course I am trying to help my granddaughter with is designed for Photoshop7. Is there any tool in "6" that will have the same function as the healing brush - or is it hiding out somewhere in 6?
View 4 Replies View RelatedI think I asked a month or so ago if the healing brush tool was available in 6.0 and was told it was not ... that it became a part of 7.0. So, since I only have 6.0 to work with, can someone suggest which editing tools I might use in place of the healing brush tool? My granddaughter has an assignment to use the HBtool to repair an old photo as part of an assignment. I can clone or use other tools to make the repairs, but am wondering if anyone has specific suggestions for what tool will make repairs that will look most like they were done with the healing brush?
View 2 Replies View Related