I'm looking at tutorials on how to add strokes to text (I downloaded it today) and they say to use the color select tool. In their demonstration, when they select text, it has the normal dotted lines around it. For me, when I click it just has a thick border around it and it tells me to move my mouse to change the threshold. It won't select the text, just change the threshold when moving my mouse from left to right.
View 1 RepliesIs there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View Related I was using Paint.net but I've found it too limited. The GIMP has much more power and I can do a lot more with it, but I've found a few things I can't figure out how to do.
For example, when I use the Eyedropper tool () to choose a color, GIMP doesn't seem to include any transparency in the selection:
The Colorpicker just chooses the color at 100% opacity. Is there any way to change this so that my new foreground color includes the transparency level?
I have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None
I love using Windows and Linux; however, my wife has a Mac Book Pro with X11...
She had an older version of Gimp installed, and recently it began crashing whenever she would select a text tool and tried to apply text to the image.
So, I uninstalled Gimp and downloaded a new version 2.8.2 from the Gimp website (without the addons). Upon opening Gimp there was no toolbar, so I went into tools and opened a toolbar. It appeared as one long toolbar to the left with width of one icon.
I was unable to close it, or click any of the tool icons on it. I'm unable to put in any dockable windows into it.... and the only thing I can do is maximize it full screen.
One workaround, which only temporarily and partially fixes it.... is to make the entire work area one window, then deselect that option and now the toolbar becomes the size of 2 icons . I still can't drop anything into it or resize it... or close it, but at least I can click on the tools and use them. However, once I close Gimp and Open it goes back to the old setup again...
Is it possible to select an area then within that area select by color?
View 1 Replies View RelatedI'm trying to change the color of this car to a gloss black using the Color Replacement Tool but how to change the color for the tool.
View 1 Replies View RelatedIs it possible to select a center point to work from, rather than an edge? (i.e. not rectangular select)
And tell it to keep an aspect ratio?
I am using the fuzzy select tool to select a contiguous region of white background (to make it transparent). The flower has some white areas and it selects a small area of the flower too.
I have another whitish flower and I have no problem with fuzzy selecting the white background.....except when I add contrast to the image (and the white areas are also selected). I haven't found a way to add contrast after fuzzy selecting/adding an alpha channel. Is there a way to do this?
I am trying to align some stuff and having a heckuva time. Its basically this..
word * wordyword * wordhere * wordwordword
the * are little blue dots centered horiz and vert.Everybody is on their own layer.I am trying to get everyone equidistant, the words aligned bottom and the dots aligne center vertical.
I select the align tool, then click on word. Next holding shift I drag everything else and it is all selected. K. I have trimmed all the layers so all that is there are the things I want to align.
I have tried clicking everything in the options box and the closest I get is with distribute horizontal centers with offset but that leaves me with odd spacing.. if I simply select the text it is better, but the spacing is still not right..
When I use my mouse to use select tools (like the lasso, the outline lines that appear (that show the selected area) show up fine. When I use my tablet, usually, they are not visible.
View 3 Replies View RelatedJust downloaded/purchased DesignerPro X and do not understand how to use this tool. I followed the instructions in the help file (as well as an old man can!) and cannot get it to work. For instance, I cannot get the color tolerance/fade controls to move off of 20/25% respectively. If you specify which photo you are using in the Design gallery, I will follow along.
View 7 Replies View RelatedI am trying to change the hue of the sky in a photo. Following the instructions in the Help file, I first used the Color Select/Erase Tool to click on the sky in several areas to erase it. The instructions then say "Now select the Make Mask button on the Infobar." My problem is that I don't see a Make Mask button. I see a Make soft mask button and an Edit Input Mask button. Since the instructions go on to talk about these other two buttons, it seems clear that they are not the Make Mask button. So where is that button?
I might add that I am also looking for a way to make just one part of a graphic transparent. Would this Color Select/Erase Tool be appropriate for doing that?
I was trying to make a color range selection to use as an adjustment mask. Each time I make the selection the dialog box freezes, I can not exit the dialog, or cancel the save options are available but even after saving can not exit dialog box. Also the menu "Select" "Save Selection" option does not work.
I end up having to close the program using Windows Task Manager. I am running Windows 7, CS6 13.01 I have tried this in both the 64 and 32 bit versions of CS6. Oddly if while in the Color Range selection Dialog intermittently if you only make one sample with the dropper tool you can exit the dialog with the selection in tact, but not always.
The only color the eye dropper tool selects is black. (CS6)
View 1 Replies View RelatedWhen I use the bucket tool to fill in an area, how can I select a color? It just uses black by default and I can't find a way to change this.
View 1 Replies View Relatedi tried restarting gimp but it did not fix my problem. All of a sudden, out of nowhere, my fuzzy select tool selects WAY too much even at a threshold of 1. at 2 it just selects the whole picture.Re-installing did not fix.
i am creating black/white based icons. So it is a 48x48 image. i am mainly trying to fuzzy select black, white, and transparent selections. As you can guess, it has become impossible now and i don't know what i did.
EDIT: Okay so it actually isn't selecting "too much" per-say. i willt ry and explain the best i can here:
Black and white image with the exception of some shades inbetween.Select fuzzy select and put threshhold at 1. Click. Selects all the white (i actually think it misses some). i hit SHIFT and click on a pixel that is slightly not white. VERY SLIGHTLY. In fact, it may actually be white. It fuzzy selects EVERYTHING.
Another example on an image that is Black and Transparent (with shades inbetween) Slect black on threshold 1. It selects All the black AND all the shades inbetween. Eveything except flat out transparent. i hit CTRL and select a shad einbetween and it deselects everything.
EDIT 2: Doesnt matter the threshold apparently. It will do this on any.
EDIT 3: The solution, after all, was so save these problematic images as JPG and then open them as the JPG.
I'm brand new to GIMP, I just downloaded it to get into some simple pixel art.
I was going fine, but I've run into a problem. I'm trying to select a portion of my image using the rectangle tool, and then move it to a different location using the move tool. However, when clicking and dragging the move tool it shifts the entire image, not just the portion I have selected. I read in the FAQ that you need to press "Enter" to finalise the selection before you move it, but even doing that doesn't work.
This was working fine for me earlier, I'm not sure what I've done to break it. I've tried resetting my tool preferences back to defaults but that has not worked.
I seem to be getting only partial transparency when using Foreground Select Tool (as compared to Full Transparency when using Rectangular Select Tool)
I am pretty sure this was not the case the other day. I have tried resetting all Tool Options and looking through preferences for anything I may have changed but can't spot anything.
I am trying to use the rectangle tool to select a rather specific area. I am trying to make a 50x50 square in the bottom left corner, but I don't know how I would accomplish this.
View 1 Replies View RelatedI'm just getting back into image editing after a year of hiatus, and so I downloaded the newest version of gimp so I could get started. My select tool worked fine for a few minutes, then stopped letting me move pieces of my layer around. I was thinking maybe I accidentally changed a setting, so I fiddled with that, but no luck.
Select will still let me highlight and edit specific pieces of the layer, just not move them around. When I drag and drop, the piece of my layer appears as if I've selected nothing, and I'm only working on a single layer at the moment.
I've been wondering how do you get the rectangle select tool to move the image, like in mspaint whenever I use it, it just moves the rectangle square and not the selected part of the image.
View 2 Replies View RelatedWhen I copy a selection from one image to another, I can't select the feather tool to blend it in the new image (it's greyed out). I have to first anchor the layer, then use the paths tool to re-select the pasted portion again, then feather. Is there another way?
Update: Looks like I can feather before copying/pasting the selection.
Is there a trick/tip to making a straight line with Free Select Tool?
View 3 Replies View Relatedi'm basically making a shape with the pen tool, then i click the paint bucket, then the shape disappears. i've also done this with the rectangle tool and the exact same thing happens.
usually, it will work when i frst open the document, but after i start making new layers/text then i try to do this, the shape i make disappears.
how i can keep the shape so i can select the paint bucket tool?
At first I thought it was a touchpad problem, but I discovered that three different optical mice have the same issue + a 4th optical mouse on a different computer also experiences this issue...
particularly when I am using the free select tool, the mouse movements start to get VERY jerky when I am going around corner after corner when my image is zoomed to 100% or greater on a 2500px or larger image, it lots of times causes me to mess up because it jerks around a lot... no other program has this issue, not even other programs where I need to get into tight corners with a mouse!!! this ONLY happens in Gimp!!! other tools have this jerky mouse movement problem to but is experienced mostly using free select!!! How do I fix this Gimp jerky mouse movement issue??? Gimp seems to be the only program with this issue!!!
Recently upgraded to Gimp 2.8 for the single window mode (which worksbrilliantly in Ubuntu, especially with the HUD).
But the Rectangle Select Tool has a new - but odd - behaviour. When I drawa selection, and then add to that selection, a new "square" is position atmy cursor. (See attached screenshot.) This didn't happen in 2.6 and is abit irritating because it disorientates me slightly, especially if I'mworking quickly.
Is there a way to turn that off (or revert it to the 2.6 way)?
I choose the Free Select Tool and painstakingly click around the border of something to remove the background. Typically it's a car and I do hundreds of tiny free select points tracing around the car's outline. I make my way around the entire car and double-click to connect the last point with the first one. Then all the selection points disappear, I have no selection around the car, and I'm unhappy.
Here's what happened. Before I started working I inadvertently had done a "Select All". The Free Select Tool was inadvertently left in "Add" mode. GIMP did what it was supposed to do, it added the car outline selection to the "Select All" selection - with the result equal to "Select All" - and there goes all my selection points around the car.
You can end up in the same bad place when "Select None" has been done and you inadvertently left the Free Select Tool in "subtract" mode.
How I can use gimp to select all shades of one color, and change them. I was using the colorize tool, but because of all the shades in the image, it doesn't seem to be working correctly, or I can't find a good way to change the colors. Perhaps a brief explanation on how to recolor an image would be amazing, or perhaps a better way to use the colorize tool in general.
View 1 Replies View RelatedI already know about the Select-->By Color and then Edit-->Clear method of removing all of a certain color from an image. The thing I was wondering was what would be the best method in Gimp to select only certain portions of a certain color in an image and have them cleared out, not all of that color.
I attached an image to this post. In that image, I want to only remove the white background, not the white in the eyes of the white in the hands.
I am making a poster but not very experienced with GIMP.I want it to look like this:URL...The perspective tool doesn't work because it makes it unreadable as the text I want to use is quite long - 3 words long.
View 2 Replies View Related