Photoshop :: Color Range Doesn't Work Properly In CS3
Oct 19, 2008
I have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None
View 1 Replies
ADVERTISEMENT
Sep 18, 2012
If I have elements on separate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected. That's not what I want! I only want it to select the colour range on that one level. The work around is to manually turn off other levels, but on a file with lots of levels, that can be tedious. Can this be avoided? Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).
View 15 Replies
View Related
Oct 14, 2012
Just bought the new CS6, but already got a problem:
Color range in Photoshop doesn't work, every time I try to use it, it says, that there is a programming error.
View 3 Replies
View Related
Jan 10, 2006
When I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.
I am using CS
View 2 Replies
View Related
Mar 21, 2013
I have a cround road with curb and gutter, sidewalk, a retaining wall, and pan at the top of the retaining wall behind it, and then a link slope to surface. From station 3+40 to 3+50 we are not putting in any pan. The topp of the the wall at these stations is at existing grade.
When I go into my corridor section editor at station 3+40 and delete the pan behind the wall it goes away. When I click on "apply to range of stations" and put in 3+50 for the end station, my corridor sections do not change. Why is this? 3+40 stays changed but thats the only one. I have rebuild automatic set and even if I click the update corridor button, it does not apply this station range.
View 1 Replies
View Related
Aug 31, 2012
There is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension.
[URL]
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug.
View 3 Replies
View Related
May 27, 2013
I made a slide show in Elements 11 that will play from elements beautifully. I have burned it to cd 3 times and still it will not open, on the same computer. Says it will not open because it is the wrong type of file. What am I doing wrong? when I open it in Elements, it is exactly what I wanted. I need a cd to play at a graduation party, but it just WON'T work..
View 1 Replies
View Related
Feb 6, 2013
I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.
View 1 Replies
View Related
Jan 2, 2013
Is there a trick to getting the new Color Range selection function to work on a retina Mac Book Pro? I am quite familiar with the color range selection in the previous version of Photoshop, and used it regularly. I've decided to try as simply as possible by using a flat image (no layers), and trying to select colors. I've increased the contrast in the image to make dark and lights much easier to pull out.
I've explored setting the sample size to point-sample up to 3x3, and 5x5. I've also set the resolution of my display to 2880 x 1800 (to reduce the possibility of anti-aliasing problems). It will not make any selection though, using the eye-dropper sample. Using other options will work, such as Highlights, Shadows, Skin Tones, etc., but it won't do anything with Sampled Colors.
View 4 Replies
View Related
Oct 22, 2013
I'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast!
Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!
View 9 Replies
View Related
Nov 17, 2013
As what the title says, inputting Chinese characters in Illustrator CC on Mac is not possible. Is there any way to fix this besides waiting for Adobe to release a patch?
View 4 Replies
View Related
Jun 8, 2012
in print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
View 8 Replies
View Related
Oct 8, 2013
When I try to open the material browser in Revit 2014, the screen opens. But suddenly Revit in totally doesn't work and it says 'Does not respond'When i try to close the material browser the whole program closes and my work is lost unsaved.
View 1 Replies
View Related
May 8, 2012
previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
View 5 Replies
View Related
Feb 26, 2014
If I click on an eye symbol the symbol disappears, but not the elements on the screen like you should expect. There's also a weird behavior with the lock symbols. If I lock a layer, I can click the paths anyway. The lock symbols doesn't work anymore. The whole layers palette is useless now. I tried to remove the whole "Adobe Illustrator 17 Settings" folder, but that had no positive effect.
View 11 Replies
View Related
Jul 31, 2012
I don't know what went wrong with that View. I can create polygon planes properly in all views but top view.What can I do to make it function again when I set up the Project.this problem occurs everytime when I set up Image Planes for the top, side and front view. URL...
View 2 Replies
View Related
Dec 1, 2013
I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.
View 4 Replies
View Related
Aug 5, 2013
I took a photo of the sunrise. The sun was very "red" from forest fire smoke. But when I looked at the photo later the sun had lost its "red" (due to the brightness of the sun). restore the sun color as I saw it?
Below is the photo I want changed and the next photo (not mine) is approx. the color I saw the sun as (perhaps a little redder). I want "my" sun filled with that color.
View 2 Replies
View Related
Jul 13, 2013
I'm looking at tutorials on how to add strokes to text (I downloaded it today) and they say to use the color select tool. In their demonstration, when they select text, it has the normal dotted lines around it. For me, when I click it just has a thick border around it and it tells me to move my mouse to change the threshold. It won't select the text, just change the threshold when moving my mouse from left to right.
View 1 Replies
View Related
Jan 29, 2012
I have seen this in a lot of photos especially kids photos. The picture on the right show more of what I am talking about. See the vibrant greens and blues and oranges. Obviously those are not the originally colors of that background. I am trying to figure out how this is done.
View 1 Replies
View Related
Jul 29, 2013
As soon as you set a color for a layer listed in the layer window, you can't undo that. The "no color" selection in the context menu does nothing. Looks like a bug.
And btw. on page [URL] ...... the link "User Groups" points to [URL] .... which isn't delivering anything ("No data received").
View 1 Replies
View Related
May 31, 2012
I am using the latest version of GIMP on my windows 7 pc but color to alpha doesn't work. At my pc at work it works fine but i use windows xp there and i have ghostscript and python installed.
Or is it something completely different?
View 4 Replies
View Related
Dec 25, 2011
I have the new Lion OSX. I have Lightroom 2.7. I am having issues with the colour picker. It will not leave the colour palette and let me select from the image. I have tried holding down my mouse key, but it won't leave the palette. This is in the adjustment brush..
View 2 Replies
View Related
Dec 3, 2011
I am trying to use Color Balance and the window doesn't work. The only part that shows is the "Enhance Color Balance" box, the words "purple" and "green" just above, and the preview arrow (which does nothing) and "preview on image". Preview on image is checked and it does show changes but I am unable to uncheck it. Nothing else shows. Nothing I have tried has worked, including restarting the computer.
View 6 Replies
View Related
Aug 31, 2011
i have a black written logo with some letters in blue and i want to change the color into green.
the problem is that at the edge of each letter the color is slightly different (light blue) to make it look smoother.
if i now take the color bucket and fill the letter up, the color changes but it gets filled with the same color until the edges and it doesn't look smooth again.
changing the antialias effekt doesn't effect anything -
to
i want to change the blue by green but with the lighter parts of the edges. simple and easy like refilling the colors.
is this possible with Paint.NET or should i consider to buy photoshop because of this lack of functionality?
View 4 Replies
View Related
Dec 28, 2012
According to URL....I should be able to sample a color from the desktop. This doesn't work when I try to capture a color from a web page displayed in IE 10 (desktop mode).
It does work with Chrome, and I suspect other browsers as well (haven't the time to try them all).
View 4 Replies
View Related
Aug 19, 2013
I dobbleclick on fill-color icon in lower right side of the screen to change the fill-color. But no dialog-box appear. But if I try to click anywhere in Corel after this I just get a beep. Looks like there is a dialog-box outside screen or something.
View 4 Replies
View Related
Sep 21, 2013
I wonder if the bevel tool works with pantone color?
I just couldn't get the result.
View 6 Replies
View Related
Jan 9, 2013
Is there any way in Elements 9 to convert a color or color range to "transparent"? I want to change a white background of an imported image (a map) to transparent so only the non-white objects (lines and shapes) are present. The image is way too complex to select each area individually.
View 4 Replies
View Related
Jul 8, 2012
when I exercise the opacity slider for an active layer I can see the full range of opacity follow the setting. Somehow I've gotten this v2.6 on a Linux box into a mode where the visible opacity doesn't follow the slider full range. Instead it is all or nothing. At 50% or less opacity the layer is entirely transparent and at 50.1% or more it is entirely opaque.
View 2 Replies
View Related
Apr 10, 2005
I am trying to learn how to use colour range in PS 5.5.
I select the eyedropper & click on a spot inside the area I want to select.
The fuzziness bar in the dialog box is supposed to have a triangle to slide & a value box. Instead the fuzziness bar and the value box are grayed out. There is no triangle to slide. I am unable to set the fuzziness tolerance.
How do I get the fuzziness function to work?
View 6 Replies
View Related
