previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
I have and array that looks fine in model space but when viewed in a viewport from paperspace, sections of the array look like they are wiped out. Going back to model space everything looks fine. The only way I can get it to fill in is to delete the viewport and create another one. It's then fine for awhile but before long, areas are missing again. I've redone the viewport three times and it's starting to drive me nuts.
View 5 Replies View Relatedthe user is running C3D. He can only open a drawing if its in the previously open files list or he can open with Explorer. If he clicks the open toolbar or selects open from the menu or even types it at the command prompt, nothing happens. It seems to be trying to do something because the command prompt doesn't come back unless he escapes. If he instead hits enter, he gets a message that says it can't find the file specified - even though he never got a chance to specify anything. It's not FILEDIA and he has rebooted. It's also not hiding the open dialog box behind the acad screen.
View 9 Replies View Relatedwhy the label command does not work in the 2007 LandDesktop ...Instead I just get the error "AEC_CIVIL_ NONASSOCAUTOLABEL".
View 1 Replies View RelatedI'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast!
Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!
I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.
View 1 Replies View RelatedWhen I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.
I am using CS
How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies View RelatedI have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None
As what the title says, inputting Chinese characters in Illustrator CC on Mac is not possible. Is there any way to fix this besides waiting for Adobe to release a patch?
View 4 Replies View Relatedin print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
View 8 Replies View RelatedIf I have elements on separate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected. That's not what I want! I only want it to select the colour range on that one level. The work around is to manually turn off other levels, but on a file with lots of levels, that can be tedious. Can this be avoided? Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).
View 15 Replies View RelatedThere is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension.
[URL]
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug.
When I try to open the material browser in Revit 2014, the screen opens. But suddenly Revit in totally doesn't work and it says 'Does not respond'When i try to close the material browser the whole program closes and my work is lost unsaved.
View 1 Replies View RelatedI made a slide show in Elements 11 that will play from elements beautifully. I have burned it to cd 3 times and still it will not open, on the same computer. Says it will not open because it is the wrong type of file. What am I doing wrong? when I open it in Elements, it is exactly what I wanted. I need a cd to play at a graduation party, but it just WON'T work..
View 1 Replies View RelatedIf I click on an eye symbol the symbol disappears, but not the elements on the screen like you should expect. There's also a weird behavior with the lock symbols. If I lock a layer, I can click the paths anyway. The lock symbols doesn't work anymore. The whole layers palette is useless now. I tried to remove the whole "Adobe Illustrator 17 Settings" folder, but that had no positive effect.
View 11 Replies View RelatedI don't know what went wrong with that View. I can create polygon planes properly in all views but top view.What can I do to make it function again when I set up the Project.this problem occurs everytime when I set up Image Planes for the top, side and front view. URL...
View 2 Replies View RelatedI purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.
View 4 Replies View RelatedI need to Veto ETRANSMIT in some cases, I stripped down my code to a msgbox that will ask if i want to Veto Or not
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServices<Assembly: ExtensionApplication(GetType(GHATransmit.Initialization))> Namespace GHATransmit Public Class Initialization Implements IExtensionApplication Public KillCommand As Boolean = False Public Sub Initialize() Implements Autodesk.AutoCAD.Runtime.IExtensionApplication.Initialize Dim dm As DocumentCollection = Application.DocumentManager Dim doc As Document = dm.MdiActiveDocument AddHandler
[code]....
Even if the e.veto has been sent to AutoCAD the ETRANSMIT command still continues.
I have a 3d drawing file which I manually flattened except the section. The ground plan is at 0 Z axis.
Now I am trying to draw lines on top of it, and I cannot extend my lines. Any solution to this?
Additional question:
I also had some difficulties when I was trying to flatten the 3d model. "Flatten" command did not work. I understand Flatshot did not work because these are not solids. But why Flatten did not work? That was why I had to manually change start and end of z position.
I have used the wblock command to block out drawings for use by other companies and was backsaving by using the wblock browsing ellipsis.
I keep getting requests to backsave the blocks again, so this process doesn't seem to work.
I have some mulitleaders in paperspace that lost their associativity with objects in model space. _dimreassociate will work with to reattach a leader arrowhead to a model object but the command doesn't work with multileaders. Is there another way to do this or do I have to redraw the multileaders?
View 2 Replies View RelatedIn AutoCAD 2011 in mapclassic mode I removed some buttons that I don't use from the Modify toolbar and now the copy command doesn't work. I can't even type in the command line.
View 1 Replies View RelatedWhy my Block command does not work anymore?
I type in the command ( I'm an old school typer, hate the buttons ) BLOCK....then the next thing that happens is (after hitting enter of course), my crosshairs instantly turn into the Windows arrow.
I wasn't playing with any switches. I was just trying to make a little block with a number in it.
Yes, I restarted AutoCAD, restarted the computer, did not reload in AutoCAD.....AutoCAD 2011 by the way.
I run Windows 7 Home Premium 64bit.
I have to do a WBLOCK to make the blocks I need to bypass this odd behavior.
I am rehab a part of road, and using overlaymillandlevel 2 subassembly. I'm noted that when existing cross slope past to 6%, corridor is not build like the picture below. understand why this happenning.
View 5 Replies View RelatedThis is in reference to the DGNPURGE command for Civil 3D 2014 that can be installed from this hotfix:[URL]
I have already installed Service pack 1 for Civil 3D 2014.
I installed this hotfix on 16 computers in my office. So far the command runs successfully on only 4 computers.
Everyone in my company uses Windows 7 64-bit on computers that are identical. Once the hotfix is installed it doesn't work for everyone. It will run, but it returns this error:
"Unable to erase stroke (AcDbZombieObject): eNotAllowedForThisProxy"
That error is displayed thousands of times, I assume once for each unreferenced stroke. The at the end it says this:
"Purged 0 unreferenced complex linetype records (of 0). Purged 0 unreferenced strokes (of 19970)."
For only a few people, when they run DGNPURGE on the same exact drawing and it purges the unreferenced strokes just fine. It then says:
"Purged 0 unreferenced complex linetype records (of 0) Purged 19969 unreferenced strokes (of 19970)"
Each installation of Civil 3D was performed in exactly the same way from a deployment by one of our IT staff members. In addition, we already tried uninstalling Civil 3D and reinstalling it on one of the computers and it still doesn't work.
At the suggestion of Autodesk support I tried starting one of the computers in diagnostic mode and that didn't work either.I made sure to use the files in the px64 folder. In addition, I did try the files in the px86 folder just to see if they would work and they do not.Also, I have installed the Civil 3D 2012 hotfix for everyone and it works fine for everyone including those who the C3D 2014 hotfix doesn't work.
In Civil 3D 2013 > Settings tab > General > Label Sytles > Note . . .create a new label style that will label the latitude and longitute of a location in your drawing. Assign your drawing a coordinate system. Now label a point in your drawing with the newly created Lat-Long label. Tell me if it works. I've not had any luck with it. I can do it fine in Civil 3D 2012, but no matter what I do (old drawing, new drawing, any template) it just doesn't seem to work in Civil 3D 2013.
View 9 Replies View RelatedI got a scanned image and wanna to get contour lines from it, so i'd like to know how does "Contour Follow" command work in A.C. civil 3d???
View 9 Replies View RelatedThe draw order toolbar icon is displayed on screen. When I try to change the draw order, I hit the toolbar and get an AI_Draworder unknown command. I even moved the toolbar in a different part of the screen. The only why I can now change the draw order on an entity is the type in the word draworder in the command line. Is there any way to reactiviate the draw order toolbar?
View 7 Replies View RelatedEvery time I double click on single line text it brings up the properties. I have searched online and made the changes to certain toggle settings and still nothing. I'm not doing something right I just can't figure it out. I know "DDEDIT" can do the trick. But, I know double clicking has worked on previous version and I want it to work on my 2013 version.
View 8 Replies View RelatedSeems every application but Autocad Civil 3D can read in a DEM with rectangular spacing.
how to approach this? I have a lot of files, I really don't want to have to resample them all at a square spacing so Civil 3D feels good.
See attached files.
Even Spacing
18m x 18m grid spacing
Rectangular Spacing
18.2 x 17.2m grid spacing
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)