AutoCAD Civil 3D :: Lat - Long Label Doesn't Work?
Aug 22, 2012
In Civil 3D 2013 > Settings tab > General > Label Sytles > Note . . .create a new label style that will label the latitude and longitute of a location in your drawing. Assign your drawing a coordinate system. Now label a point in your drawing with the newly created Lat-Long label. Tell me if it works. I've not had any luck with it. I can do it fine in Civil 3D 2012, but no matter what I do (old drawing, new drawing, any template) it just doesn't seem to work in Civil 3D 2013.
View 9 Replies
ADVERTISEMENT
Oct 3, 2013
why the label command does not work in the 2007 LandDesktop ...Instead I just get the error "AEC_CIVIL_ NONASSOCAUTOLABEL".
View 1 Replies
View Related
Feb 27, 2013
We are trying to label the intersection points on an alignment with the following info:
Sta:
Delta Angle
LAT
LONG
We can make it work with a Northing and Easting, but there is no option for a LAT LONG under the tangent intersection labels. I tried to make an expression that would format a Northing as a LAT but it just gave me jibberish.
I was able to do it but adding a point at each PI and making a point reference text, but you then have to select a different point for each label.... which works but it is still a multi step process.
View 9 Replies
View Related
Jan 4, 2012
Civil 3D 2011, updates installed - I have a user who is manually importing points into his drawing. He has set the default label style in his command settings to a specific style, but no matter what he does the points come in with the previously set default style (the out-of-the-box label style). We've tested this in a new drawing with the same results. We've tested this on several computers with the same results.
My initial thought was that something on the network was holding this setting somehow. We disconnected his computer from the network with the same results.
What could be causing this label style to stick?
View 5 Replies
View Related
Dec 6, 2013
I am rehab a part of road, and using overlaymillandlevel 2 subassembly. I'm noted that when existing cross slope past to 6%, corridor is not build like the picture below. understand why this happenning.
View 5 Replies
View Related
Jan 8, 2014
This is in reference to the DGNPURGE command for Civil 3D 2014 that can be installed from this hotfix:[URL]
I have already installed Service pack 1 for Civil 3D 2014.
I installed this hotfix on 16 computers in my office. So far the command runs successfully on only 4 computers.
Everyone in my company uses Windows 7 64-bit on computers that are identical. Once the hotfix is installed it doesn't work for everyone. It will run, but it returns this error:
"Unable to erase stroke (AcDbZombieObject): eNotAllowedForThisProxy"
That error is displayed thousands of times, I assume once for each unreferenced stroke. The at the end it says this:
"Purged 0 unreferenced complex linetype records (of 0). Purged 0 unreferenced strokes (of 19970)."
For only a few people, when they run DGNPURGE on the same exact drawing and it purges the unreferenced strokes just fine. It then says:
"Purged 0 unreferenced complex linetype records (of 0) Purged 19969 unreferenced strokes (of 19970)"
Each installation of Civil 3D was performed in exactly the same way from a deployment by one of our IT staff members. In addition, we already tried uninstalling Civil 3D and reinstalling it on one of the computers and it still doesn't work.
At the suggestion of Autodesk support I tried starting one of the computers in diagnostic mode and that didn't work either.I made sure to use the files in the px64 folder. In addition, I did try the files in the px86 folder just to see if they would work and they do not.Also, I have installed the Civil 3D 2012 hotfix for everyone and it works fine for everyone including those who the C3D 2014 hotfix doesn't work.
View 5 Replies
View Related
Apr 27, 2010
the user is running C3D. He can only open a drawing if its in the previously open files list or he can open with Explorer. If he clicks the open toolbar or selects open from the menu or even types it at the command prompt, nothing happens. It seems to be trying to do something because the command prompt doesn't come back unless he escapes. If he instead hits enter, he gets a message that says it can't find the file specified - even though he never got a chance to specify anything. It's not FILEDIA and he has rebooted. It's also not hiding the open dialog box behind the acad screen.
View 9 Replies
View Related
Jun 25, 2009
The draw order toolbar icon is displayed on screen. When I try to change the draw order, I hit the toolbar and get an AI_Draworder unknown command. I even moved the toolbar in a different part of the screen. The only why I can now change the draw order on an entity is the type in the word draworder in the command line. Is there any way to reactiviate the draw order toolbar?
View 7 Replies
View Related
May 8, 2012
previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
View 5 Replies
View Related
Oct 18, 2013
Every time I double click on single line text it brings up the properties. I have searched online and made the changes to certain toggle settings and still nothing. I'm not doing something right I just can't figure it out. I know "DDEDIT" can do the trick. But, I know double clicking has worked on previous version and I want it to work on my 2013 version.
View 8 Replies
View Related
Jun 27, 2013
Seems every application but Autocad Civil 3D can read in a DEM with rectangular spacing.
how to approach this? I have a lot of files, I really don't want to have to resample them all at a square spacing so Civil 3D feels good.
See attached files.
Even Spacing
18m x 18m grid spacing
Rectangular Spacing
18.2 x 17.2m grid spacing
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
View 7 Replies
View Related
Mar 4, 2009
I have to go up to cut and select the object to delete. Also when I click on text the edit dialogue box doesn't come up. I have to go to properties to edit.
View 9 Replies
View Related
Mar 21, 2013
I have a cround road with curb and gutter, sidewalk, a retaining wall, and pan at the top of the retaining wall behind it, and then a link slope to surface. From station 3+40 to 3+50 we are not putting in any pan. The topp of the the wall at these stations is at existing grade.
When I go into my corridor section editor at station 3+40 and delete the pan behind the wall it goes away. When I click on "apply to range of stations" and put in 3+50 for the end station, my corridor sections do not change. Why is this? 3+40 stays changed but thats the only one. I have rebuild automatic set and even if I click the update corridor button, it does not apply this station range.
View 1 Replies
View Related
May 8, 2012
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies
View Related
Sep 6, 2012
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
View 1 Replies
View Related
Jan 3, 2013
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies
View Related
May 3, 2013
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
View 1 Replies
View Related
Aug 8, 2013
I'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
View 2 Replies
View Related
Jan 14, 2014
What is going on with Lightroom 5? I upgraded from 4 and now it doesn't export with a maximum long edge of 2166 pixels even though that is what it is being told to do.
View 3 Replies
View Related
Dec 21, 2012
How can I get the Match Long Edges function to work. I have tried hovering over image on a page, but no option or double headed arrow appears.
View 4 Replies
View Related
Dec 7, 2004
I was wondering if anyone knew what is wrong with my smudge tool. When I go to use it and apply it to my image, it takes a while to show the affect. Everything else in my photoshop works fine. Oh yeah, I use PS CS if that makes any difference.
View 3 Replies
View Related
May 17, 2013
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies
View Related
Aug 8, 2012
I was tried to convert a point from UTM-39N to Lat/Long using geodetic calculator; but when I checked the converted coordinates by another applications (like GeoLab); they were a little different (about two seconds) & I'm sure GeoLab is right.
My settings and other information is attached.
View 9 Replies
View Related
May 11, 2012
I am working on a drawing for the COE. They require that the horizontal scale is 1"=20 feet for cross sections. Unfortunately the sections that I need to cut are so long that they don't fit on the page. Currently I am creating multiple viewports in paper space and creating split section views in that way but it is starting to get out of hand.
Any better way to handle sections that won't fit on a page? I can't change the scale.
View 2 Replies
View Related
Mar 7, 2013
I am trying to produce some longsections from a DWG Format Drawing i downloaded from a mapping website (promap) at the moment im going through the process of using a 3d polyline, snapping it to every contour i need, then viewing it from the side and drawing a longsection table around it (Pretty amatuer im sure) How is it possible to produce a longsection automatically using Civil 3D/AutoCAD (The contour map is made up of 3D Poly lines).
View 1 Replies
View Related
Oct 25, 2013
I have created an alignment and long section and over layed my assembly to produce the corridor through my alignment. However it is standard practice in the UK to show the channel levels on a long section.
View 3 Replies
View Related
Oct 9, 2012
I am wanting to get the peak flow back into Civil3d to add to our long sections, I assume the Peak Flow in SSA is the Flow rate property for the pipe in Civil3d, the HGL stuff seems to come in ok. I am just doing a basic rational analysis in SSA is there a trick to getting the data?
Attached is a screen capture of SSA versus Civil3d data
[URL].......
View 6 Replies
View Related
Mar 29, 2012
It's taking a long time to move cogo points. About 2 minutes for a single point move. Other commands affecting points are taking longer too. Would it just be a function of file size.
Sample point:
AECC_COGO_POINT Layer: "V-NODE-P-CURB-FACE"
Space: Model space
Handle = daf3e
Primary point group : Pro Face Curb
Point Number : 5198
[code]...
View 4 Replies
View Related
May 8, 2013
I have a copy of an old plan showing curved boundaries which I wish to recreate in C3D. There's lots of connecting arcs, all of which are annotated like:
RAD 15
CHORD 21.213
121°22'15"
ARC 23.56
T.L. 15
I can see that the first line is the radius, the 2nd and 3rd lines are the length and orientation of the arc chord, the 4th line is the arc length. I've been able to get a correct result by firstly drawing the chords, then adding arcs with the appropriate radii between the two ends of each chord. However, I'm sure there's a quicker and easier way. Sometimes the arcs are separated by short sections of straight line which have length and bearing details as well.
Attached is a screen shot of a short length.
View 3 Replies
View Related
Dec 29, 2010
It seems to happen randomly and I can't tell what triggers it. Everytime I regen or autosave/save the status shows "displaying contours" and a load bar that takes way too long and slows me down...
View 9 Replies
View Related
Jun 29, 2012
For some reason I am unable to get my lat and long's to display using note labeling in C3D 2013.
I can setup a labeling style to add and display NE coordinates where ever I place them on my surface but my Lat and Long label style remains blank.
I've checked layer being on, text size, drawing unit/zone settings, even tried replacing my NE label style call outs in the NE label style text component editor properties to Lat and long and still remains blank in my composer preview....
View 4 Replies
View Related
