AutoCAD Civil 3D :: Read DEM File With Rectangular Spacing Doesn't Work
Jun 27, 2013
Seems every application but Autocad Civil 3D can read in a DEM with rectangular spacing.
how to approach this? I have a lot of files, I really don't want to have to resample them all at a square spacing so Civil 3D feels good.
See attached files.
Even Spacing
18m x 18m grid spacing
Rectangular Spacing
18.2 x 17.2m grid spacing
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
View 7 Replies
ADVERTISEMENT
Dec 6, 2013
I am rehab a part of road, and using overlaymillandlevel 2 subassembly. I'm noted that when existing cross slope past to 6%, corridor is not build like the picture below. understand why this happenning.
View 5 Replies
View Related
Jan 8, 2014
This is in reference to the DGNPURGE command for Civil 3D 2014 that can be installed from this hotfix:[URL]
I have already installed Service pack 1 for Civil 3D 2014.
I installed this hotfix on 16 computers in my office. So far the command runs successfully on only 4 computers.
Everyone in my company uses Windows 7 64-bit on computers that are identical. Once the hotfix is installed it doesn't work for everyone. It will run, but it returns this error:
"Unable to erase stroke (AcDbZombieObject): eNotAllowedForThisProxy"
That error is displayed thousands of times, I assume once for each unreferenced stroke. The at the end it says this:
"Purged 0 unreferenced complex linetype records (of 0). Purged 0 unreferenced strokes (of 19970)."
For only a few people, when they run DGNPURGE on the same exact drawing and it purges the unreferenced strokes just fine. It then says:
"Purged 0 unreferenced complex linetype records (of 0) Purged 19969 unreferenced strokes (of 19970)"
Each installation of Civil 3D was performed in exactly the same way from a deployment by one of our IT staff members. In addition, we already tried uninstalling Civil 3D and reinstalling it on one of the computers and it still doesn't work.
At the suggestion of Autodesk support I tried starting one of the computers in diagnostic mode and that didn't work either.I made sure to use the files in the px64 folder. In addition, I did try the files in the px86 folder just to see if they would work and they do not.Also, I have installed the Civil 3D 2012 hotfix for everyone and it works fine for everyone including those who the C3D 2014 hotfix doesn't work.
View 5 Replies
View Related
Apr 27, 2010
the user is running C3D. He can only open a drawing if its in the previously open files list or he can open with Explorer. If he clicks the open toolbar or selects open from the menu or even types it at the command prompt, nothing happens. It seems to be trying to do something because the command prompt doesn't come back unless he escapes. If he instead hits enter, he gets a message that says it can't find the file specified - even though he never got a chance to specify anything. It's not FILEDIA and he has rebooted. It's also not hiding the open dialog box behind the acad screen.
View 9 Replies
View Related
Aug 22, 2012
In Civil 3D 2013 > Settings tab > General > Label Sytles > Note . . .create a new label style that will label the latitude and longitute of a location in your drawing. Assign your drawing a coordinate system. Now label a point in your drawing with the newly created Lat-Long label. Tell me if it works. I've not had any luck with it. I can do it fine in Civil 3D 2012, but no matter what I do (old drawing, new drawing, any template) it just doesn't seem to work in Civil 3D 2013.
View 9 Replies
View Related
Jun 25, 2009
The draw order toolbar icon is displayed on screen. When I try to change the draw order, I hit the toolbar and get an AI_Draworder unknown command. I even moved the toolbar in a different part of the screen. The only why I can now change the draw order on an entity is the type in the word draworder in the command line. Is there any way to reactiviate the draw order toolbar?
View 7 Replies
View Related
May 8, 2012
previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
View 5 Replies
View Related
Oct 18, 2013
Every time I double click on single line text it brings up the properties. I have searched online and made the changes to certain toggle settings and still nothing. I'm not doing something right I just can't figure it out. I know "DDEDIT" can do the trick. But, I know double clicking has worked on previous version and I want it to work on my 2013 version.
View 8 Replies
View Related
Mar 4, 2009
I have to go up to cut and select the object to delete. Also when I click on text the edit dialogue box doesn't come up. I have to go to properties to edit.
View 9 Replies
View Related
Oct 3, 2013
why the label command does not work in the 2007 LandDesktop ...Instead I just get the error "AEC_CIVIL_ NONASSOCAUTOLABEL".
View 1 Replies
View Related
Mar 21, 2013
I have a cround road with curb and gutter, sidewalk, a retaining wall, and pan at the top of the retaining wall behind it, and then a link slope to surface. From station 3+40 to 3+50 we are not putting in any pan. The topp of the the wall at these stations is at existing grade.
When I go into my corridor section editor at station 3+40 and delete the pan behind the wall it goes away. When I click on "apply to range of stations" and put in 3+50 for the end station, my corridor sections do not change. Why is this? 3+40 stays changed but thats the only one. I have rebuild automatic set and even if I click the update corridor button, it does not apply this station range.
View 1 Replies
View Related
Jun 6, 2012
As a digital art teacher I need to check the files my students submit for authenticity. I noticed that since the last 2 CS Suite upgrades the "File info" functionality is no longer available (File>File Info). When I open a student file and I select this option, a blank window appears. I cannot click out of it so I have to do a "Force Quit" and restart the application. I work with Photoshop and Illustrator. I need to be able to see who created the file and when the file was created. How do I restore functionality? Is there a plug-in I need now? I work on a Mac in CS Suites 5.1
View 5 Replies
View Related
Mar 11, 2011
When I go to customize and drag "View image file" to a toolbar, although it says "view image file" on the toolbar it is in black, and doesn't work when clicked on. This is the case on at least 2 entirely different systems.
View 1 Replies
View Related
Jun 20, 2012
I've just started a new job, and I'm on a PC with CS6. (I'm used to Mac, CS5)
I can't seem to get 'open recent file' to work in any of my CS6 programes It is always greyed out and never remembers what I've last done. Does it have something to do with the files being stored on a passworded server?
View 2 Replies
View Related
May 10, 2013
I am using LR 4.3. I added keywords to my pictures. Some keywords got synonyms. I also checked "export synonyms" in the keyword options. When pressing Strg-S to save meta date into the files (all JPEG) all keywords are stored but without synonyms. When doing a normal export then synonyms are saved directly in the JPEG.
Is there a way to save the synonyms also with Strg-S or do I have to export all pictures and re-import them into LR? To be honest that would be not what I expect from a good software.
View 1 Replies
View Related
May 3, 2013
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
View 1 Replies
View Related
Jul 31, 2013
When I (as I have in Photoshop CS2,3,4,5,5.5 and 6) click in the letting menu and change the letting, it allows me to change it and then when I click enter, it jumps down to a completely different number. I set it to 200 and hit enter and it drop to 19. I change it to 200 again, it becomes 47.
I am runnning the updated version of CC on windows 7 64-bit.
View 1 Replies
View Related
Mar 12, 2013
Is there a possibility to work in the same time on the same file on two different pc's. Like my co worker would be developing plan for road i would make profile view in that file , and he could see my changes as well as i would see his ? Can i reach this goal using shortcuts ?
View 1 Replies
View Related
Oct 1, 2013
I am in C3D 2012 and using Romans.shx for my text. When labeling an Arc, the degree symbol comes out too close to the following text/number. Is there any way to adjust the spacing on curved text. On a straight line it looks fine.
View 4 Replies
View Related
Aug 16, 2011
Is there anyway to reduce the extra space in the table rows. We finally ran into a situation on a job where the tables have to be smaller. So we ended up exploding the line & curve tables and manually adjusting the spacing.... Exporting the table data to excell would be useful, but cant find a way to do that. Reporting the line calls to html and copy clip to excell would work, but cant seem to do that either.
View 3 Replies
View Related
Jun 4, 2013
I learnt that grid spacing in Section Views/Cross Section Sheets is controlled by the Bottom Horizontal Axes minor tick intervals and Left Vertical Axes minor tick intervals in the Section View Style dialog box(see Capture). If this is true what, then, is the function of the grid spacing settings in the "Plot Are" Tab of "Group Plot Style" dialog box (see the other Capture).
View 2 Replies
View Related
Dec 9, 2013
The vertical spacing in curve and line tables (the space between the text and the horizontal line) is too big. This makes the table too long and hard to fit on maps. For regualr tables, you can modify this. However, for curve and line tables this is not available. Is there a .NET file that creates/formats the tables that I could modify to reduce the spacing??
C3D 2012, but the same is true for 2014.
View 9 Replies
View Related
Mar 15, 2012
When you use the Spacing command to set the work canvas grid spaciing, it requires that you pick a point in the drawing and then enter the value? Shouldn't it just prompt you for a value? Seems like a bug maybe. Am I missing a settings or something?
View 5 Replies
View Related
Mar 8, 2013
Is there anyway to change a rectangular Mview to a polygon one. I have all the text and call outs and now the engineer wants to blank out everything behind the match lines. I will probably never make a rectangle mview again.
View 4 Replies
View Related
Mar 1, 2013
I have questions in 2012 pipe network labels.
We are having problems with running out of space and would like to squeeze the line spacing between lines to get more room. We know how to do that in standard MTEXT but can't find the equivalent in the label settings.
I have also noticed problems getting dragged pipe labels to stack. I check the box to stack on drag, but it doesn't seem to do it. We created a separate stacked label style.
View 2 Replies
View Related
Sep 27, 2012
For some reason when I place new text or line work in a file it is fine, but when I save the drawing, close it and re-open it all of the text and line work found in model space goes gray. Yet if I place new text and use the match property command on text placed previously, that is now gray, and use it on new text, the new text recieves the attributes of what the previously placed text has minus the appearance of being gray. In my drawing I am using a shape file and a data connect image through planning and analysis.
View 1 Replies
View Related
Jun 19, 2012
Is it possible to move the autolayout data of this existing rectangular pipe (see attached). I want my pipe to attach at the top or bottom rather than the middle. I tried creating one from scratch but don't really know what im doing yet and can't seem to get it to validate.I've seen a bunch on creating structures, but not much on pipes.
View 1 Replies
View Related
Dec 18, 2012
How to create a very small DXF file with just a rectangular frame and the words "Missing Proforma"?
I have a VB6 program for producing our loop drawings which modifies a DXF drawing. All works very nicely but sometimes mistakes are made in the database and my routine gets upset. Previously it just reported the error but today I modified it to look for a "blank" dxf file on the network. This works very well but I am aware that if the folder gets renamed my routine won't find the file.
I thought that I could hard code the dxf file into my VB prog but the DXF file I made is VERY big, and I am sure contains a lot more information than is actually necessary for my needs.
View 9 Replies
View Related
Aug 20, 2013
(if (findfile MyFile)
(setq fl (open MyFile "a"))
)
the file exists however the open function still returns nil... the file is not read only, and permission on the file appear to be just fine.What other reasons would there be that cause open function to return nil?This is happening only on one machine. All the others are writing to the file just fine.
View 5 Replies
View Related
May 7, 2013
In Land Desktop using the Hydrology tools, we could get capacities for rectangular pipes based on slope, size, etc.
I have tried using the Hydraflow Express tools for this, but cannot figure out how to use them for a RECTANGULAR pipe (i.e. 10x4) box. Saw the circular option, but couldn't change where it says circular.
This is not a culvert analysis because we have inlets, multiple slopes, etc. It is part of an entire system.
I use these tools to layout the system before I want to put it into the analyses software we are using.
View 1 Replies
View Related
Jun 26, 2013
Using MacPro (5 years old), OS Lion, full RAM, 4 HD's with 2 TB+ drives, plenty ofroom left over in all.
ALL 44k images located in one LR3 catalog (recent upgrade to LR5 hoping for remedy 2 days ago) show 'read-only' notice, so after doing any kind of work on them in develop, etc. I select all (in specific folder, not 44k photos!) then save it, a notice comes up and says these are 'read-only' files. Thus not able to save any work that is apparent in LR. BUT, when exported as JPG all changes are saved.
I have opened various folders, NOT via LR, but via Finder (OS Lion) and opened one by one using PS 4 and they open fine in RAW converter window. Save as PSD, all files look fine. Same for JPG's.
The issue is LR, or hard drive or something along the chain where the photos, when viewed in LR, say they are 'read-only'.
Via Finder window I have opened various files (denoting read-only notice) and right-clicked to 'get info' on that specific photo. ALL files are 'read and write', there are NO files that are denoted read-only when getting the info. I checked 50+ photos in 25 different folder locations.
Laptop test:
I started a new LR catalog in LR5, with ZERO photos and imported a few folders, with images that had 'read-only' notice to make sure I tested the same photos that had given me the read-only notice.
Did a test on photos with 'read-only' files on a laptop (OS Mountain Lion), pulled files from HD where ALL 44k photos are located. Copied to thumb drive, imported with LR5, copied to desktop in test folder, all photos came in fine, slected all, did global edit to all images, saved all, all images were saved with NO 'read-only' notice. This is true for a series of folders.
So my test, if it proves anything, is that either LR is messed-up or the HD is messed-up on MacPro tower or something is telling LR to show the 'read-only' notice to pop up.
Back-ups:
Back-ups were done from HD where all 44K photos reside, to 2 (two) other drives, within MacPro tower. So ALL 44k photos are essentially the same. This was a drag-n-drop not using Super Duper or similar byte-verification software.
why ALL 44k images say 'read-only', when viewed in LR5 in MacPro tower but NOT in laptop? HD is 5 years old...could this be the weak link?
Also, considering to wipe the complete system drive (not HD where photos reside) and re-load everything from scratch to begin anew. My concern is will this work and then, will wiping all drives and re-loading all images, then re-loading LR5 catalog will solve this. I am resigned to a week of doing this if it works as right now, I am at a stand still and cannot go forward or backward.
View 8 Replies
View Related
