The draw order toolbar icon is displayed on screen. When I try to change the draw order, I hit the toolbar and get an AI_Draworder unknown command. I even moved the toolbar in a different part of the screen. The only why I can now change the draw order on an entity is the type in the word draworder in the command line. Is there any way to reactiviate the draw order toolbar?
View 7 RepliesI get the following error message when I hit the "Draw Order" button or try an "Express Tool" command. I just installed Acad 2012 and it does not load.
Command:
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
Command:
Command: blockreplace Unknown command "BLOCKREPLACE". Press F1 for help.
the layer order will not function as soon as the block is made dynamic. I have been creating my blocks the harder way and still have more to do, so what to do.
The last time I asked the Autodesk technician, I was told it is a program (Autodesk) issue which I call a bug. I have tried the draw order and the Textofront still, no better result.
When I go to customize and drag "View image file" to a toolbar, although it says "view image file" on the toolbar it is in black, and doesn't work when clicked on. This is the case on at least 2 entirely different systems.
View 1 Replies View RelatedI still having this issue: in Civil 3D 2013 spanish, after intalled SP1, draw order commands (right click > draw order) get a message " command not recognized"
View 3 Replies View RelatedWhat I want to do is to have an area label where the text background mask obscures linework but does not obscure the parcel fill (hatch). I think it looks bad when you have a light hatch where the background mask cuts a big hole in it.
Usually I would use draw order to do something like this. But since the fill and text are part of one object that won't work. I looked to see if there was any way to affect the order in the Parcel Style but didn't see any.
I've got a Profile View style set up just the way I want it. The only problem that I have is that the automated fill hatch that I'm using between my existing and finish profiles is showing up behind the grid lines. Unfortunately, we use "lines overwrite" as a standard, so I can't just switch to "lines merge". Any way or a setting that would allow me to move the draw order of the fill hatch above the grid lines?
View 5 Replies View RelatedI am rehab a part of road, and using overlaymillandlevel 2 subassembly. I'm noted that when existing cross slope past to 6%, corridor is not build like the picture below. understand why this happenning.
View 5 Replies View RelatedThis is in reference to the DGNPURGE command for Civil 3D 2014 that can be installed from this hotfix:[URL]
I have already installed Service pack 1 for Civil 3D 2014.
I installed this hotfix on 16 computers in my office. So far the command runs successfully on only 4 computers.
Everyone in my company uses Windows 7 64-bit on computers that are identical. Once the hotfix is installed it doesn't work for everyone. It will run, but it returns this error:
"Unable to erase stroke (AcDbZombieObject): eNotAllowedForThisProxy"
That error is displayed thousands of times, I assume once for each unreferenced stroke. The at the end it says this:
"Purged 0 unreferenced complex linetype records (of 0). Purged 0 unreferenced strokes (of 19970)."
For only a few people, when they run DGNPURGE on the same exact drawing and it purges the unreferenced strokes just fine. It then says:
"Purged 0 unreferenced complex linetype records (of 0) Purged 19969 unreferenced strokes (of 19970)"
Each installation of Civil 3D was performed in exactly the same way from a deployment by one of our IT staff members. In addition, we already tried uninstalling Civil 3D and reinstalling it on one of the computers and it still doesn't work.
At the suggestion of Autodesk support I tried starting one of the computers in diagnostic mode and that didn't work either.I made sure to use the files in the px64 folder. In addition, I did try the files in the px86 folder just to see if they would work and they do not.Also, I have installed the Civil 3D 2012 hotfix for everyone and it works fine for everyone including those who the C3D 2014 hotfix doesn't work.
the user is running C3D. He can only open a drawing if its in the previously open files list or he can open with Explorer. If he clicks the open toolbar or selects open from the menu or even types it at the command prompt, nothing happens. It seems to be trying to do something because the command prompt doesn't come back unless he escapes. If he instead hits enter, he gets a message that says it can't find the file specified - even though he never got a chance to specify anything. It's not FILEDIA and he has rebooted. It's also not hiding the open dialog box behind the acad screen.
View 9 Replies View RelatedIn Civil 3D 2013 > Settings tab > General > Label Sytles > Note . . .create a new label style that will label the latitude and longitute of a location in your drawing. Assign your drawing a coordinate system. Now label a point in your drawing with the newly created Lat-Long label. Tell me if it works. I've not had any luck with it. I can do it fine in Civil 3D 2012, but no matter what I do (old drawing, new drawing, any template) it just doesn't seem to work in Civil 3D 2013.
View 9 Replies View Relatedpreviously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
Every time I double click on single line text it brings up the properties. I have searched online and made the changes to certain toggle settings and still nothing. I'm not doing something right I just can't figure it out. I know "DDEDIT" can do the trick. But, I know double clicking has worked on previous version and I want it to work on my 2013 version.
View 8 Replies View RelatedSeems every application but Autocad Civil 3D can read in a DEM with rectangular spacing.
how to approach this? I have a lot of files, I really don't want to have to resample them all at a square spacing so Civil 3D feels good.
See attached files.
Even Spacing
18m x 18m grid spacing
Rectangular Spacing
18.2 x 17.2m grid spacing
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
I have to go up to cut and select the object to delete. Also when I click on text the edit dialogue box doesn't come up. I have to go to properties to edit.
View 9 Replies View RelatedI only turned my back on my daughter for a moment; but before I knew it she had rearranged everything on my computer. I don't know how she managed it; now I don't have a "Draw" toolbar on the screen anymore! I don't know where it's gone, and I haven't got a clue how to get it back. I have right-clicked on the side of the screen and selected the ACAD tab etc. and the "Draw" option is ticked.
View 6 Replies View Relatedwhy the label command does not work in the 2007 LandDesktop ...Instead I just get the error "AEC_CIVIL_ NONASSOCAUTOLABEL".
View 1 Replies View RelatedI have a cround road with curb and gutter, sidewalk, a retaining wall, and pan at the top of the retaining wall behind it, and then a link slope to surface. From station 3+40 to 3+50 we are not putting in any pan. The topp of the the wall at these stations is at existing grade.
When I go into my corridor section editor at station 3+40 and delete the pan behind the wall it goes away. When I click on "apply to range of stations" and put in 3+50 for the end station, my corridor sections do not change. Why is this? 3+40 stays changed but thats the only one. I have rebuild automatic set and even if I click the update corridor button, it does not apply this station range.
So I'm having an issue with draw order... I have a base with a solid screened hatch that is xrefed into a sheet file in model space. I have text, reference bubbles, dimensions, etc in paper space. When I print, the information in paper space that is above the hatch isn't showing up. Usually the information in paper space would show up when I print without having to deal with draw order...
View 3 Replies View RelatedI like to set up my draw order within my CAD file since I use many XREFs to create my design. Every time I go back into the drawing the draw order reverts back. How can I get it to stay in the order I have changed it?
View 1 Replies View RelatedIs there are tool somewhere where you can make the draw order layer specific. I.e so we have a layer with a certain number of items on it that always appear above another layer with other types of items.
We tend to use leaders a fair bit and they often drop below some of our design elements, ideally we want them to be at the front & have to spend time bringing to front / sending to back etc.
I have been unable to make Draw Order work well. The attached file and other ones I created would not work. The goal is to have the boarder and text (color 7) always stay on top after it is created as a block and pasted to any drawing. After pasting it, the text go underneath the shade (color 155). I have used Draw Order, picked the objects in the order I would like, repeated the same steps inside the Block Editor and Edit Block In-Place, still, the block would not work. I never had this issue before - seem to have stared today. Don't know what else to do. The only thing that works is keep recreating the block till one works, which seldom works.
View 7 Replies View RelatedI like my Dimenion Extension Lines to be hidden if over another object, so I use the Draw Order button "Send to Back", but it gets a bit tedious to do it every time.
I searched this forum and found a thread that explains how to create a keyboard command to do it, which is useful, but I'm wondering can I set a property of Dimensions (or any other object for that matter) so that when it is created its Draw Order is automatically set to the Back (or the front, if I wish)?
We have a project where we have a combination of CAD data and shape files (connected) with various labels in both formats.
They are in the proper order for both 'Groups' and 'Draw Order' in the 'Display Manager'.
We have two separate viewports, created and named using 'Display Maps' with the applicable layers turned to visible as each viewport requires (some common shapefiles need to be display, some different, some different CAD data also). When we do a regen within one viewport the other non-active viewport immediately loses its draw order (CAD objects appear above the shapefile data). If we switch viewports and Regen then the first viewport will lose its draworder.
Could this be a case for Autodesk Subscription and the developer's to resolve?
Is there any way to have more control over the Draw Order? "Move to the Back," "Bring Annotation to Front" etc. is so clumsy and not precise.
PhotoShop has a whole Layers palette where you can drag certain layers above others. Right now I'm tearing my hair out because my Electricity layer keeps getting hidden behind the Furniture Layer which must also contend with the Flooring Layer... Isn't there a setting to do this permanently?
To permanently set up which layers will automatically be above or below other ones?
I'd want something like this...
TOP
- Text layers
- Dim Layers
- Electrical symbols
- Electrical appliances
- Furniture
- Wall Cladding
- Flooring
BOTTOM
With the code below the draworder is not retained , does anynone knows how to retain the draworder in a .net copy command?
Function MaakKopie(ByVal objIds As ObjectIdCollection) As ObjectIdCollection
MaakKopie = New ObjectIdCollection
Dim doc = Application.DocumentManager.MdiActiveDocument
Dim dwg = doc.Database
Using doc.lockdocument
Using transactie = doc.TransactionManager.StartTransaction()
[Code]....
In order to make a 2D sketch, how can I make appear constructions lines in order to draw a top view from the main view?
View 1 Replies View RelatedIs there anyway that I can assign a layer to be always in the front/on top of all other layers in draw order?
View 0 Replies View RelatedI've used cad now in a basic 2d architectural sense now for 10 years, through various versions.
I have recently dropped back to a 2007 from 2008 (changed jobs) and for some reason the draw order is all messed up i noticed this first through hatching but its on everything including inserted images.
I've tried a few of the solutions on other threads even uninstalling cad and re-installing it and nothing seems to be sorting it. Functions like 'send to back' etc just don't work and the draw orders are all to pot.
I am using the command Draw Order and would like to use the Quick Select so that I can select all objects on a specific layer. How do I use the Quick Select in conjuction with the Draw Order command?
View 8 Replies View Relatedtool bar doesnt appear
View 2 Replies View Related