AutoCAD Civil 3D :: Why Label Command Doesn't Work In The 2007 Land Desktop
Oct 3, 2013why the label command does not work in the 2007 LandDesktop ...Instead I just get the error "AEC_CIVIL_ NONASSOCAUTOLABEL".
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: 2008 Land Desktop Companion Drawing Orientation Label?
Aug 15, 2012Typically at my company we rotate our drawing orientation under the Projects - Drawing Setup - Orientation. Rotate the drawing to a known basis of bearings. Then we label the boundary and the bearings are rotated to match the basis of bearings without having to rotate the drawing in model space. Just reciently my labels havne't been holding the orientation. So when I add a static or dynamic label the bearing reads as though my orientation is due north. BUT, when I loook at the line priperties, the bearing is correct, as it has held the orientation.
View 4 Replies View RelatedAutoCAD Civil 3D :: Convert Land Desktop Points
Aug 23, 2011When converting Land Desktop Points to Civil 3D, it doesn't display point labels, descriptions, elevations, or point numbers. How do I correct this?
View 9 Replies View RelatedAutoCAD Civil 3D :: Land Desktop Files In 2011
Mar 13, 2012When we try to open/save a file that was started in Land Desktop, we get significant performance slowdowns, lockups, and crashes in Civil 3D 2011. Most of these files only contain simple linework, labels, etc. (no Land Desktop surfaces, alignments, profiles created in project).
We've tested purge, purge regapps, audit, recover, Export to AutoCAD, and AECOBJEXPLODE (which produces errors). WBLOCK is not really an option in this case because we may have to reference multiple projects back to these original Land Desktop files.
AutoCAD Civil 3D :: Lat - Long Label Doesn't Work?
Aug 22, 2012In Civil 3D 2013 > Settings tab > General > Label Sytles > Note . . .create a new label style that will label the latitude and longitute of a location in your drawing. Assign your drawing a coordinate system. Now label a point in your drawing with the newly created Lat-Long label. Tell me if it works. I've not had any luck with it. I can do it fine in Civil 3D 2012, but no matter what I do (old drawing, new drawing, any template) it just doesn't seem to work in Civil 3D 2013.
View 9 Replies View RelatedAutoCAD Civil 3D :: Land Desktop Files Crash When Opened?
Oct 9, 2013When I try to open a LDD file with C3D, the file locks up and won't open. It appears to happen only when the LDD file has an alignment defined.
View 8 Replies View RelatedAutoCAD Civil 3D :: Point Shift On Convert Land Desktop Points?
Nov 26, 2012I had inserted a Land Desktop drawing containing points in to a C3D 2012 drawing. There was a small difference in coordinates. I used Autocad move and rotate to adjust. This was fine because I only needed a visual reference. Now someone wants the information and I need to convert the Aecc points to Civil cogo points.
The problem is that the convertldtpoints command doesn't use the location of the point marker as the coordinates for the converted points. It uses the Northing-Easting stored in the AECC_Point object. Those are the pre-adjustment coordinates.
Civil 3D 2012 SP 2.1
Dell Precision T7400
Xeon CPU 3.16 GHz
Nvidia Quadro FX 4600
12 GB RAM
Win 7 Pro, 64-bit
AutoCAD Civil 3D :: Open Command Doesn't Work
Apr 27, 2010the user is running C3D. He can only open a drawing if its in the previously open files list or he can open with Explorer. If he clicks the open toolbar or selects open from the menu or even types it at the command prompt, nothing happens. It seems to be trying to do something because the command prompt doesn't come back unless he escapes. If he instead hits enter, he gets a message that says it can't find the file specified - even though he never got a chance to specify anything. It's not FILEDIA and he has rebooted. It's also not hiding the open dialog box behind the acad screen.
View 9 Replies View RelatedAutoCAD Civil 3D :: Array Command Doesn't Work Properly
May 8, 2012previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
AutoCAD .NET :: Veto ETRANSMIT Command Doesn't Work
Sep 13, 2013I need to Veto ETRANSMIT in some cases, I stripped down my code to a msgbox that will ask if i want to Veto Or not
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServices<Assembly: ExtensionApplication(GetType(GHATransmit.Initialization))> Namespace GHATransmit Public Class Initialization Implements IExtensionApplication Public KillCommand As Boolean = False Public Sub Initialize() Implements Autodesk.AutoCAD.Runtime.IExtensionApplication.Initialize Dim dm As DocumentCollection = Application.DocumentManager Dim doc As Document = dm.MdiActiveDocument AddHandler
[code]....
Even if the e.veto has been sent to AutoCAD the ETRANSMIT command still continues.
AutoCAD 2010 :: Extend Command Doesn't Work
Mar 10, 2012I have a 3d drawing file which I manually flattened except the section. The ground plan is at 0 Z axis.
Now I am trying to draw lines on top of it, and I cannot extend my lines. Any solution to this?
Additional question:
I also had some difficulties when I was trying to flatten the 3d model. "Flatten" command did not work. I understand Flatshot did not work because these are not solids. But why Flatten did not work? That was why I had to manually change start and end of z position.
AutoCad :: WBlock Command Allows For Backsaving But Doesn't Seem To Work
May 18, 2011I have used the wblock command to block out drawings for use by other companies and was backsaving by using the wblock browsing ellipsis.
I keep getting requests to backsave the blocks again, so this process doesn't seem to work.
AutoCAD 2010 :: Dimreassociate / Command Doesn't Work With Multileaders
Mar 26, 2013I have some mulitleaders in paperspace that lost their associativity with objects in model space. _dimreassociate will work with to reattach a leader arrowhead to a model object but the command doesn't work with multileaders. Is there another way to do this or do I have to redraw the multileaders?
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Copy Command Doesn't Work?
Oct 18, 2013In AutoCAD 2011 in mapclassic mode I removed some buttons that I don't use from the Modify toolbar and now the copy command doesn't work. I can't even type in the command line.
View 1 Replies View RelatedAutoCad :: Converting Land Desktop AECC Points To Cogo Points
May 17, 2013there is a way to convert land desktop aecc points to cogo points and use the full description?
I do not have access to the ldt files nor to the Descriprion keys file. It would be nice if there was an option to preserve full descriptions when converting (that would be just too simple).
AutoCAD Civil 3D :: Alignment Intersection Label Command
Apr 12, 2012How to label the intersection of the alignments for 3D 2012. This command will label the station equation between alignments automatically.
View 1 Replies View RelatedAutoCAD 2010 :: Block Command Doesn't Work - Crosshairs Instantly Turn Into Windows Arrow
Aug 19, 2010Why my Block command does not work anymore?
I type in the command ( I'm an old school typer, hate the buttons ) BLOCK....then the next thing that happens is (after hitting enter of course), my crosshairs instantly turn into the Windows arrow.
I wasn't playing with any switches. I was just trying to make a little block with a number in it.
Yes, I restarted AutoCAD, restarted the computer, did not reload in AutoCAD.....AutoCAD 2011 by the way.
I run Windows 7 Home Premium 64bit.
I have to do a WBLOCK to make the blocks I need to bypass this odd behavior.
AutoCAD Civil 3D :: Default Label Style Doesn't Stick
Jan 4, 2012Civil 3D 2011, updates installed - I have a user who is manually importing points into his drawing. He has set the default label style in his command settings to a specific style, but no matter what he does the points come in with the previously set default style (the out-of-the-box label style). We've tested this in a new drawing with the same results. We've tested this on several computers with the same results.
My initial thought was that something on the network was holding this setting somehow. We disconnected his computer from the network with the same results.
What could be causing this label style to stick?
Edge Animate CC :: Absolute URL From A Subordinate File To Land At Label Within Timeline
Nov 21, 2013Is it possible to assign an absolute URL from a subordinate file to land at a label within timeline of an Edge file.
I am creating a site which is too large for one file and it would be better for the subordinate files to access the master. With Flash I have usually achieved this by having one shell file which loads and unloads files according to the buttons clicked.
To minimise the number of html (an) files I organise the site as follows:
Home page - contains "courses", "about", "contact"
the subordinate files such as info, links, treatments, acupuncture, remedial massage etc etc need to have linke to "contact" say which is within the Home page timeline.Here is the example I am working on and you may see the problem of scale involved: URL....
The first four buttons come in one file while all the rest are separate files which at present can only link back to home page.
AutoCAD LT :: 2007 Crashes With The Layer Command
Feb 15, 2013I currently use Autocad LT 2007 and every time I use the llayer command Auticad crashes.
View 4 Replies View RelatedAutoCAD Civil 3D :: OverlayMillAndLevel2 Doesn't Work?
Dec 6, 2013I am rehab a part of road, and using overlaymillandlevel 2 subassembly. I'm noted that when existing cross slope past to 6%, corridor is not build like the picture below. understand why this happenning.
View 5 Replies View RelatedAutoCAD Civil 3D :: DGNPURGE Doesn't Work On All Computers
Jan 8, 2014This is in reference to the DGNPURGE command for Civil 3D 2014 that can be installed from this hotfix:[URL]
I have already installed Service pack 1 for Civil 3D 2014.
I installed this hotfix on 16 computers in my office. So far the command runs successfully on only 4 computers.
Everyone in my company uses Windows 7 64-bit on computers that are identical. Once the hotfix is installed it doesn't work for everyone. It will run, but it returns this error:
"Unable to erase stroke (AcDbZombieObject): eNotAllowedForThisProxy"
That error is displayed thousands of times, I assume once for each unreferenced stroke. The at the end it says this:
"Purged 0 unreferenced complex linetype records (of 0). Purged 0 unreferenced strokes (of 19970)."
For only a few people, when they run DGNPURGE on the same exact drawing and it purges the unreferenced strokes just fine. It then says:
"Purged 0 unreferenced complex linetype records (of 0) Purged 19969 unreferenced strokes (of 19970)"
Each installation of Civil 3D was performed in exactly the same way from a deployment by one of our IT staff members. In addition, we already tried uninstalling Civil 3D and reinstalling it on one of the computers and it still doesn't work.
At the suggestion of Autodesk support I tried starting one of the computers in diagnostic mode and that didn't work either.I made sure to use the files in the px64 folder. In addition, I did try the files in the px86 folder just to see if they would work and they do not.Also, I have installed the Civil 3D 2012 hotfix for everyone and it works fine for everyone including those who the C3D 2014 hotfix doesn't work.
AutoCAD Civil 3D :: How Does Contour Follow Command Work
Mar 28, 2013I got a scanned image and wanna to get contour lines from it, so i'd like to know how does "Contour Follow" command work in A.C. civil 3d???
View 9 Replies View RelatedAutoCAD Civil 3D :: Draw Order Toolbar Doesn't Work?
Jun 25, 2009The draw order toolbar icon is displayed on screen. When I try to change the draw order, I hit the toolbar and get an AI_Draworder unknown command. I even moved the toolbar in a different part of the screen. The only why I can now change the draw order on an entity is the type in the word draworder in the command line. Is there any way to reactiviate the draw order toolbar?
View 7 Replies View RelatedAutoCAD Civil 3D :: Double Click To Edit Text Doesn't Work
Oct 18, 2013Every time I double click on single line text it brings up the properties. I have searched online and made the changes to certain toggle settings and still nothing. I'm not doing something right I just can't figure it out. I know "DDEDIT" can do the trick. But, I know double clicking has worked on previous version and I want it to work on my 2013 version.
View 8 Replies View RelatedAutoCAD Civil 3D :: Read DEM File With Rectangular Spacing Doesn't Work
Jun 27, 2013Seems every application but Autocad Civil 3D can read in a DEM with rectangular spacing.
how to approach this? I have a lot of files, I really don't want to have to resample them all at a square spacing so Civil 3D feels good.
See attached files.
Even Spacing
18m x 18m grid spacing
Rectangular Spacing
18.2 x 17.2m grid spacing
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
AutoCAD Civil 3D :: Delete Key Doesn't Work / Unable To Edit Text
Mar 4, 2009I have to go up to cut and select the object to delete. Also when I click on text the edit dialogue box doesn't come up. I have to go to properties to edit.
View 9 Replies View RelatedAutoCAD Civil 3D :: Apply Corridor Section Edits To Range Doesn't Seem To Work?
Mar 21, 2013I have a cround road with curb and gutter, sidewalk, a retaining wall, and pan at the top of the retaining wall behind it, and then a link slope to surface. From station 3+40 to 3+50 we are not putting in any pan. The topp of the the wall at these stations is at existing grade.
When I go into my corridor section editor at station 3+40 and delete the pan behind the wall it goes away. When I click on "apply to range of stations" and put in 3+50 for the end station, my corridor sections do not change. Why is this? 3+40 stays changed but thats the only one. I have rebuild automatic set and even if I click the update corridor button, it does not apply this station range.
AutoCAD Civil 3D :: Land XML Reporting 2013
Jan 22, 2013OK, I just did a new install of Civil 3D on a clean machine, were might I find the XML Reporting for 2013 so that I can edit the format and percision of the reports.
View 1 Replies View RelatedAutoCAD Civil 3D :: Unable To Insert Land Xml
Nov 1, 2013 Last week I could import xml files just fine. Now when I go to import a xml I get
"_AeccLandXMLIn Unknown command "AECCLANDXMLIN". Press F1 for help."
AutoCAD Civil 3D :: Exporting Corridor To Land XML
Oct 24, 2012what happens when we try to export corridor to Land XML file? Do we get design cross sections that surveyors can import in the equipment? I need to export my cl alignment with the design cross sections.
View 9 Replies View Related