AutoCAD Civil 3D :: Unable To Insert Land Xml
Nov 1, 2013 Last week I could import xml files just fine. Now when I go to import a xml I get
"_AeccLandXMLIn Unknown command "AECCLANDXMLIN". Press F1 for help."
ADVERTISEMENT
AutoCAD Civil 3D :: Drawing Land On Site When Xref Or Insert As Block
Jun 24, 2013I'm using C3D 2013. I received a survey drawing (unknown version) from a third party. I tried both xref'ing and inserting as block into my drawing and it was over 7,100' SW from my site. BUT when I copy from 0,0,0 in his drawing and paste 0,0,0 in my drawing, it lands on my site. If I xref my drawing into his drawing, it lands on his survey information. Why doesn't his drawing land on my site when I xref or insert as block?
View 6 Replies View RelatedAutoCAD Civil 3D :: Land XML Reporting 2013
Jan 22, 2013OK, I just did a new install of Civil 3D on a clean machine, were might I find the XML Reporting for 2013 so that I can edit the format and percision of the reports.
View 1 Replies View RelatedAutoCAD Civil 3D :: Exporting Corridor To Land XML
Oct 24, 2012what happens when we try to export corridor to Land XML file? Do we get design cross sections that surveyors can import in the equipment? I need to export my cl alignment with the design cross sections.
View 9 Replies View RelatedAutoCAD Civil 3D :: Convert Land Desktop Points
Aug 23, 2011When converting Land Desktop Points to Civil 3D, it doesn't display point labels, descriptions, elevations, or point numbers. How do I correct this?
View 9 Replies View RelatedAutoCAD Civil 3D :: Feature Lines Export To Land XML?
May 8, 2012I would like to export feature lines out as land xml file. Can this be done in Civil 3D or is there another work around.
View 5 Replies View RelatedAutoCAD Civil 3D :: Sites / Feature Lines / Land XML
Oct 30, 2013I brought a site into a drawing by LandXML which had 35 feature lines in it. How do you get the actual linework of the feature lines to show up in your drawing? It shows them in the site but the linework is not there.
View 1 Replies View RelatedAutoCAD Civil 3D :: Designing Land Fill Expansion Cap
Apr 22, 2013I am fairly new to civil 3d (currently using 2012) and have been tasked with designing a proposed landfill cap. The end goal i am looking to achieve is to dertermin the amount of fill that can fit within a footprint. If approved i would then design a haul road and swales. I understand the basics of grading however i have run in to a few issues while attempting this. Let me describe what i have tried so far.
-Obtained existing contours and created a surface out of this.
-Obtained proposed footprint extents
-Attempted "grade to elevation" using the footprint to grade up to an elevation using a 3:1 slope. Learned this tool does not work as i expected and abandoned this idea
-Attempted "grade to surface" using a 3:1 slope and a top footprint with an assigned elevation.
The final step i believe is creating what i want however the surface is not very "clean". Here is an example of what i mean; [URL]....... Is my feature line not simple enough or is my existing surface perhaps too complex?
AutoCAD Civil 3D :: Land XML Report Bearing Format
Dec 20, 2013I am trying to find where the formatting is for the General Legal Description bearings. I am currently getting an output of NORTH 00° 12' 33" EAST, but would like to eliminate the spaces in the DMS: NORTH 00°12'33" EAST. This is also the case with the delta angle for curves. When I run the Metes and Bounds report, the bearings appear without the spaces. I think that I have changed it before, but I have switched employers since editing the files.
View 2 Replies View RelatedAutoCAD Civil 3D :: Soils And Land Type Organization
Dec 2, 2013When I work on a site I need to identify several different situations and organizing those situations is getting hard, how do you do it?
The land usually has multiple soil types, a max of 4 types A, B, C, D
I also need to track the impervious, grass and tree areas going to an unknown number of outfalls
The impervious area can be broken down into structures, roadway, parking lots, sidewalks and other
Also you need to have this information for your existing conditions and your impervious conditions.
Usually I just delineate everything and hatch them with a layer like C-IMPV-A for proposed impervious soil type A
I have also tried creating parcels to represent the areas delineated, but when you get a couple hundred parcels it gets confusing.
AutoCAD Civil 3D :: Land Desktop Files In 2011
Mar 13, 2012When we try to open/save a file that was started in Land Desktop, we get significant performance slowdowns, lockups, and crashes in Civil 3D 2011. Most of these files only contain simple linework, labels, etc. (no Land Desktop surfaces, alignments, profiles created in project).
We've tested purge, purge regapps, audit, recover, Export to AutoCAD, and AECOBJEXPLODE (which produces errors). WBLOCK is not really an option in this case because we may have to reference multiple projects back to these original Land Desktop files.
AutoCAD Civil 3D :: Land Desktop Files Crash When Opened?
Oct 9, 2013When I try to open a LDD file with C3D, the file locks up and won't open. It appears to happen only when the LDD file has an alignment defined.
View 8 Replies View RelatedAutoCAD Civil 3D :: Limit Of Rock Cut For A Land Development Project
Mar 23, 2013I need to determine a limit of rock cut for a land development project. I have created surfaces for my Existing Grade and Top of Rock. Is there any way to determine the limit of rock cut within 25 ft of the existing ground, the volume of rock cut, and show the limit of rock cut on my plan view?
I could drop the Existing Grade elevations by 25 feet, but then how would I create a separate Surface from the intersection of the lowered Existing Grade surface and the Top of Rock Surface?
AutoCAD Civil 3D :: How To Find Volume Of Land Cutting Filling At Particular Level
Apr 25, 2012I am trying to find a volume of land cutting filling at particular level?
I import point file in surface 1
How to make surface 2 for particular level ..
AutoCAD Civil 3D :: Point Shift On Convert Land Desktop Points?
Nov 26, 2012I had inserted a Land Desktop drawing containing points in to a C3D 2012 drawing. There was a small difference in coordinates. I used Autocad move and rotate to adjust. This was fine because I only needed a visual reference. Now someone wants the information and I need to convert the Aecc points to Civil cogo points.
The problem is that the convertldtpoints command doesn't use the location of the point marker as the coordinates for the converted points. It uses the Northing-Easting stored in the AECC_Point object. Those are the pre-adjustment coordinates.
Civil 3D 2012 SP 2.1
Dell Precision T7400
Xeon CPU 3.16 GHz
Nvidia Quadro FX 4600
12 GB RAM
Win 7 Pro, 64-bit
AutoCAD Civil 3D :: 2008 Land Desktop Companion Drawing Orientation Label?
Aug 15, 2012Typically at my company we rotate our drawing orientation under the Projects - Drawing Setup - Orientation. Rotate the drawing to a known basis of bearings. Then we label the boundary and the bearings are rotated to match the basis of bearings without having to rotate the drawing in model space. Just reciently my labels havne't been holding the orientation. So when I add a static or dynamic label the bearing reads as though my orientation is due north. BUT, when I loook at the line priperties, the bearing is correct, as it has held the orientation.
View 4 Replies View RelatedAutoCAD Civil 3D :: Why Label Command Doesn't Work In The 2007 Land Desktop
Oct 3, 2013why the label command does not work in the 2007 LandDesktop ...Instead I just get the error "AEC_CIVIL_ NONASSOCAUTOLABEL".
View 1 Replies View RelatedAutoCad :: Unable To Insert Blocks
Feb 16, 2011I am having a right torrid time with this drawing first of all the seat numbers (see previous post!!) and now I can't insert a block!!
I select insert block and the dialogue box comes up - I then pick the block that I want and I check the insertion point box to specify on screen but uncheck the scale specify on screen and set it to 1.0 which is the same as the block unit, I then click ok and select a point on the drawing where I would like the block to go by clicking my left mouse button and nothing happens!
I have tried upping the scale of the block but this still does not work!
AutoCad :: Unable To Insert Images
Oct 23, 2012I am using AutoCAD CIvil 3D 2011. Just recently, I am unable to insert images. Whether I use the insert command from the menu or type in the command, the program freezes at that point until I hit escape. Now I can't work! Image manager works and insert block works. Is there a different command I can try for inserting a raster image?
I haven't made any changes to my computer, no upgrades since the last time the command worked (that I can remember) - I tried a system restore but that didn't work.
AutoCAD LT :: Unable To Insert Hatch Into Window 7
May 5, 2012Unable to find the application data or support files within Windows 7 to insert a hatch .pat file for Autocad 2011 -
View 1 Replies View RelatedAutoCAD .NET :: Unable To Insert MText Into DWG Files
Feb 13, 2012I've got a problem with inserting MText into drawings.
The code below works perfectly in new file (AutoCAD 2012 18.2.0.0) and in some files, but in some other files the MText field just doesn't show.
There's no exception thrown, no error messages, debugging shows everything is OK. what's the difference between those files which I can't insert MText into and those, which I can?
The test
[CommandMethod("WTEST3")]public void wtest3(){ acApp.Document doc = acApp.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; PromptPointOptions getPointOptions = new PromptPointOptions("Click the point for MText"); PromptPointResult
[code]........
AutoCAD 2010 :: Unable To Insert Or Delete Rows In Table
Apr 2, 2010I'm trying to add rows above rows in the middle of a table. The options under Rows are all grey/not available. The last row will allow me to add a row below and the top row will allow me to add a row above. I'm unable to Delete rows, too. The table is not listed as locked or anything. Aside from retyping the table, is there something I need to do to be able to edit the table?
View 9 Replies View RelatedVideoStudio :: Unable To Insert MP4 File From GO PRO HD Camera Into Timeline?
Nov 22, 2010I am unable to insert a MP4 file from a GO PRO HD camera into the timeline.
i get a " file format mismatch" error message
I have read several posts relating to VS10 & other versions, but not VS11+
i tried changing the file extension to .MPEG-4 but this did not work
file size is aprox 1.7Mb
VS11+
V 11.5.0157.2 Plus
Extra Content Pack
Power Pack
VS11 Patch Eng 122507-03
AutoCad 2D :: How To Get Scale For A Land
Nov 8, 2013I am quite new with autoCAD and am catching up pretty well but the problem now is this. I need to make a building plan for a land measuring 100 x 75 ft but I do not know how to draw the scale on my work space using autocad 2012.
View 9 Replies View RelatedVideoStudio :: Unable To Insert Audio (file Format Mismatch)
Oct 15, 2012I have a brand new machine with Iintel i7 windows 7 and 8mg ram, just bought VSX5 pro ultimate.
When I try to import "insert" audio file (mp3) I get back an error "file format mismatch" and so I am unable to insert it to the movie.
AutoCAD Civil 3D :: Import Or Insert Geo PDF
Aug 21, 2012Isn't there a way to import or insert a geo-referenced pdf (Geo PDF) into Civil 3D using the Planning and Analysis tools?
View 9 Replies View RelatedAutoCAD Civil 3D :: Ecw Insert Without Border
Jan 30, 2013I have ecw files inserted as raster images. Is it possible to switch off the borders?
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Insert A Scale Bar
Jun 11, 2012So I figured out how to insert a scale bar, it appears to be working, I just cant for the life of me figure out how to make the dang thing bigger! I cant "scale" the bar without messing it up. See attached pic, i want my new scale bar to be as big as the old (top) one.
View 5 Replies View RelatedAutoCAD Map 3D :: Using PLINE For Land Surveyed Descriptions
Mar 12, 2012I have bearings and distances but I am wondering if using PLIN is the best method to draw parcels in AutoCad Map 2012. I have a layer of the Townships, Ranges and Sections that I hope to align with the drawings. Most of the time it looks okay meaning they line up and for the most are where they are suppose to be but ever so often I have problems.
View 2 Replies View RelatedAutoCAD Civil 3D :: Where Is The Location Tab On The Insert Panel
Apr 30, 2013To Set Geographic Location from a Map, the Autodesk users manual says to "Click Insert tabLocation panelSet LocationFrom Map"
There is no location panel on any insert tab that came with Civil 3D 2014.
What am I missing?
AutoCAD Civil 3D :: Insert Object In Surface
Mar 20, 2012I am wondering is it posible to insert object, building in surface? I draw object with box and gave it z coordinate. the goal is that it shows in profile. also, can feature line with greading be shawn in profile?
View 5 Replies View Related