I'm trying to add rows above rows in the middle of a table. The options under Rows are all grey/not available. The last row will allow me to add a row below and the top row will allow me to add a row above. I'm unable to Delete rows, too. The table is not listed as locked or anything. Aside from retyping the table, is there something I need to do to be able to edit the table?
View 9 RepliesI've linked a table to an Excel file. It comes in with twice the number of rows that are needed. There are 35 rows of data and it comes in with 70 rows. The print area in Excel is set to only the 35 rows. Can I truncate the table?
View 2 Replies View RelatedIs there a way to hide or collapse several rows in a Table with a single click? This would be similar to grouping rows together in Excel.
View 1 Replies View RelatedI am trying to insert a table using a data link. I set up the Link through the DataLink manager and then insert the table using a range. I click OK to insert the table and after a few seconds of thinking ACAD sits there with no table on the screen. When I look in XREFs, the DL is there but says it is unrefrenced. Tried multiple ways of entering or setting up information to no avail.
View 6 Replies View RelatedWe are experiencing a case where the sheet list table will not insert into a page. It works on all other jobs, but this one won't let a sheet list table insert into any page, by any body.
I even tried inserting a block of the table from another set and then updating - all the lines disappeared.
We have done about 200 jobs with these, without trouble and this is the one giving us problems now.
I have data in an Excel spreadsheet that I want to insert into the drawing in a table format that replicates my spreadsheet formatting and creates AutoCAD entities as opposed to a bitmap image or the mess the TABLE command generates - I'm looking to keep my text consistent within the drawing and I still use the old SIMPLEX font.
View 5 Replies View RelatedI've used the attached code to set the number of colu9mns and rows in a table adn it works with all my tests.
However I also receive the warnings:
"Public overridable property NumRows() As Integer is obsolete. Use 'Table.Rows.Count' instead"
and
"Public overridable property NumColumns() As Integer is obsolete. Use 'Table.Columns.Count' instead"
Dim tb As New Table() tb.NumRows = 6 tb.NumColumns = 3
Both the Rows and Column Count property are Read only.
I wanted to edit the table, by adding a row, but it refuses to make any changes.
So, I went ahead and made a new table, but now I cannot delete the old one, nor move it anywhere.
I checked all of the cells and the table in general, but none of it is locked.
I have two tables in a drawing one of the tables has all my info and formulas. The second table has cells that are linked to the first table cell content. All works great except I need to add rows to the table with the linked cells. When I add the row this causes the row number to change. I have tried using the $ like you do in excel but that has no effect. I do not want to link my tables to an excel spread sheet because we use VAULT as our storage and it is really finicky when checking in drawings or checking out drawings.
View 0 Replies View RelatedI am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies View RelatedI create a sdf file and add a squema for non feature class, for association with an existing feature class squema property.
But the table is empty andlocked with no chance of adding values. Since it has no geometry, how can I put some rows on it.
I try to import using bulk copy, but then I cant remove or add rows.
How can I insert values in a sdf table?
I have created two table rows in an iAssembly that I would like to have a iLogic code written for.
What do I need to use to trigger between these two, when, for instance, a certain numeric value is entered in the parameters? Within the assembly file, when I use the iPart.ChangeRow (or iAssembly.ChangeRow) and put the . I am filename in the first spot, it says it cannot find the file.
This is what I am using, and the error states it cannot find the . i am file I am referencing.
IfParameter("Window_Cutout_Vertical")<=1AndParameter("Window_Cutout_Horizontal")<=1TheniAssembly.ChangeRow("A60_RHR_Door_Assembly.iam", "A60_RHR_Door_Assembly-02")ElseIfParameter("Window_Cutout_Vertical")>1AndParameter("Window_Cutout_Horizontal")>1TheniAssembly.ChangeRow("A60_RHR_Door_Assembly.iam", "A60_RHR_Door_Assembly-01")EndIf
I'm encountering disable of Delete key. Normally i use "Delete" key to erase object after it is selected. Since yesterday i can't use that key anymore. How to check the setting. I'm sure its not keybord's issue coz i can still use the key in other program(Excel & Word).
View 3 Replies View RelatedI have a table linked to an Excel spreadsheet, I unlock the cells and then right click but the Data Link sub-menu is greyed out and not available. Cannot delete the link in the data link manager becasue it is in use. Had to open the drawing in 2011 and detach the data link. 2008 also detached the link no problem.
How to detach a table link?
I use the Corel Draw table tool regularly and since upgrading to SP1 the tool no longer works. I can create a table but cannot add rows, columns or even import tables from MS Word. All functionality has gone.
I am also running a machine with X6 without SP1 and the table tool works fine so what I have to do is create the tool in X6 and then it works fine in X6 SP1.
Also noting that the upgrade has not fixed the instability on the 64Bit version as every time I select an object to move it Corel crashes.
I just downloaded AutoCAD 2012 on my imac running on my Parallels system, meaning I have the Windows version or AutoCAD 2012 running on parallels. (Because there are too many problems with AutoCAD for mac).
There is one problem however, I cannot delete by using 'backspace' on my mac keyboard. I always have to right click the selected object and go to erase. Does there exist a keyboard shortcut for erase?
Something that's been driving me around the bend lately. I have a drawing, with a viewport which I cannot select. I have unfrozen all layers, ticked the 'Selection Cycling' box, but no lines show. It's just there, a viewport, but with no viewport polyline. No way of deleting, or clipping, or doing anything with it.
View 5 Replies View RelatedI want to draw up a large grid or table in AO sized paper. I will then get it laminated and use it to write down on the left hand column each company I see and sell to. Then beside the company running horizontally I want little check boxes that I can tick off with a marker to not when I last visited that company.
So how doe I make a large sized table with evenly spaced columns and rows etc.
I though that I could just select the table button and set how many rows etc then click and drag. This works, but I want to be able to enter in a value of say 100mm wide by 30mm high and set that for each grid.
The only setting like that is for the actual whole area of the grid/table not each individual cell. Can it be done like how I said?
I am trying to switch component rows within my assembly file but can't seem to do so. All of the files are generated, yet and still I am not able to change component rows based on user parameters. Files are attached.
My code is as follow in Ilogic
MultiValue.Setlist("Material", "1", "2")
If Material = "2"
iPart.ChangeRow("RING", "RING-03:1")
End If
I would like to know if its possible to make a plugin which will create a button without the user entering any command?
View 3 Replies View RelatedIn our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
Is there any way to insert a generic table into an assembly file. I don't want to create an iAssembly or use the data to configure the component in any way. I would just like to be able to maintain some design related information within the assembly file, similar to the tables that you can create in an idw. A table just like the iAssembly table would be fine, minus the iAssembly part or any sense of configuration.
View 4 Replies View RelatedI have problem when insert too lenght table from Excel.
Inventor cut column...I used Manage -> Insert Objec
I'm creating a routine to fill in my terminal strips. This routine worked perfectly in Vba but I'm now rewriting it for .NET...The problem is that I want to insert a block with attributes into different cells.The tables already exists. Below my function, I'm stuck on this part
Dim lonReturnedIds = FunBlockId() ' Calls the function FunBlockID to get the ID's of the attributes
' 0 = BlockID
' 1 = AttributeID of KleurB
' 2 = AttributeID of KleurO
TS.Cells(i, intPosition).Contents.Add()
TS.Cells(i, intPosition).Contents(0).BlockTableRecordId = lonReturnedIds(0)
TS.Cells(i, intPosition).SetBlockAttributeValue(lonReturnedIds(1), strCableConductor2WriteFirst)
Public Function Fun_StripUp(ByVal Po3dXY As Point3d, ByVal str_CableName As String, ByVal Str_CableConductor As String, ByVal strCable Conductor 2 Write As String, ByVal strCableConductor2WriteFirst As String, ByVal intPosition As Integer) As StringDim tAcadDoc As ApplicationServices.Document = ApplicationServices.Application.DocumentManager.MdiActiveDocumentDim myDB As.
[code]...
I am insert a sheet list table - Two Columns "Dwg #" and "Sheet Title" under the first category (building 1) each column works fine) then under category 2 (building 2) it gets the file name under the dwg #.
View 2 Replies View RelatedI have to make it possible to insert table by choosing any of it's corners. I cannot get it to work with choosing bottom corners - I can't get the exact height of the table.
The sample code of the one-row table is:
acApp.Document doc = acApp.Application.DocumentManager.MdiActiveDocument;Editor ed = doc.Editor;Transaction tr = ed.Document.Database.TransactionManager.StartTransaction();try{ BlockTable bt = (BlockTable)tr.GetObject(doc.Database.BlockTableId, OpenMode.ForRead); Table tb = new Table(); tb.InsertColumns(0, 24, 1); tb.SetRowHeight(4); tb.Columns[0].Width = 24; tb.Columns[1].Width = 24; tb.Cells[0, 0].TextHeight = 2; tb.Cells[0, 0].TextString = "some text"; tb.Cells[0, 0].Alignment = CellAlignment.MiddleRight; tb.Cells[0, 1].TextHeight = 2; tb.Cells[0, 1].TextString = other_text_from_variable; tb.Cells[0, 1].Alignment = CellAlignment.MiddleCenter; tb.HorizontalCellMargin = 0; tb.VerticalCellMargin = 0; tb.GenerateLayout(); tb.Position = // exactly... what should I do here? BlockTableRecord btr = (BlockTableRecord)tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite); btr.AppendEntity(tb); tr.AddNewlyCreatedDBObject(tb, true); tr.Commit();}catch (Autodesk.AutoCAD.Runtime.Exception ex){ ed.WriteMessage("
ERR: " + ex.Message);}finally{ tr.Dispose();}
Now... I'm trying to make 1-row table width the height 4. I should set tb.Position by just subtracting 4 from the Y-value of the clicked point... NOT.
tb.Height gives me 4. But I get the table with height 5.667. And I can't just use that value for subtracting, because even then, bottom-right corner is about 0.2 above or below clicked point... (X-value is correct and equals the clicked point's X-value.)
The same thing happens when I insert a table with the number of rows depending on the number of the records selected from DB. The same thing happens, when I use obsolete .NumRows and .NumColumns. What am I missing?
From Project Navigator, I R-click the Project in the SHEET tab. This is not "lit up" to choose.
I am in my cover sheet, paper space, with 51 sheets in the set.
I tried to use the Sheet Set Manager, but I have the same problem.
I'm preparing plans for individual land owners. I know I need to filter parcels "by hand", center, zoom, scale etc. I'm using labels to get parcels numbers on the plan but I have to add name into title block. I don't want to use feature labels because concat function does not work (I need to show parcel number) plus the name I need to put on is quite long (it doesn't fit in the drawing).
My question is: Is there a way to put text into drawing / title block from attached table or from feature properties of shp or sdf files?
I am trying to insert "Depth", "Counterbore", etc. Symbols in a revision table, but can't find ALT + XXXX for them. I did find the symbols in the Windows character map in AIGDT font group and they have Character codes but no ALT + codes? How to insert these symbols in a rev table?
View 1 Replies View RelatedI'm simply trying to delete the revision table if it exists on a drawing. I did find where you can't do anything with Rev Tags with the API, but what about the Actual Revision Table?
Trying to get this to work;
If iProperties.Value("Project", "Revision Number")>0Dim oRevTable as RevisionTableoRevTable = ActiveSheet.Sheet.RevisionTable.Item(1) oRevTable = nullRevisionTable
“insert sheet list table” is not active,
I couldn’t figure out in which cases the “insert sheet list table” (attached) gets not active.
This command is supposed to provide table of contents for the layouts specified in the set of sheets pane
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.