“insert sheet list table” is not active,
I couldn’t figure out in which cases the “insert sheet list table” (attached) gets not active.
This command is supposed to provide table of contents for the layouts specified in the set of sheets pane
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am insert a sheet list table - Two Columns "Dwg #" and "Sheet Title" under the first category (building 1) each column works fine) then under category 2 (building 2) it gets the file name under the dwg #.
View 2 Replies View RelatedFrom Project Navigator, I R-click the Project in the SHEET tab. This is not "lit up" to choose.
I am in my cover sheet, paper space, with 51 sheets in the set.
I tried to use the Sheet Set Manager, but I have the same problem.
We are experiencing a case where the sheet list table will not insert into a page. It works on all other jobs, but this one won't let a sheet list table insert into any page, by any body.
I even tried inserting a block of the table from another set and then updating - all the lines disappeared.
We have done about 200 jobs with these, without trouble and this is the one giving us problems now.
I am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies View RelatedI am trying to solve a problem. My company uses AutoCAD 2013. We set up a sheet set manager template that has custom properties linked to fields in an attribute block. Now we want to finish configuring a sheet list table. The problem is that we cannot get the sheet list table to look the way we want it.
In the sheet list table we add the drawing number, the revision, and then three titles (all from left to right). The three titles come from three separate attributes in the title block. The titles say the discipline (electrical) then the system type, then the particular drawing itself. We want to figure out how if possible, to have these three separate attributes in the same sheet list table cell.
We tried to do a multi-line text, which did place all three titles into one table cell, but then had issues with the multi-line text placing the three different titles into position on the title block.
I am trying to convert my Sheet List Table into an editable Excel or Word document.
View 1 Replies View RelatedIs there a way to include custom sheet properties in the sheet list table?
AutoCAD Civil 3D 2012 (Primary),
Dell Percision T3500: MS Windows 7 64-bit SP1;
Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
I have a sheet list table setup and want to change the format for how the date shows up in a row. Is there a way to format each row/column?
View 9 Replies View RelatedI am not able to open Sheet list in Sheet Set Manager.......
View 3 Replies View RelatedI have two tables on a drawing one showing a parts list the other changes to dimensions.
The table to show the dimension changes is a configuration table pointing to an ipart.
iLogic is used to update the ipart but you have to right click to update the Active Member in the ipart to see the drawing update.
Is there a way to automate the 'update active member'? (on the ipart table - this does update the drawing)
I just have the one row in the table, it's purpose was to pass the values onto the drawing (as the part resizes I didn't want the dimensions moving so opted to tabulate them) - hoping they would update!
or
Is there a way to have a table update parametrically i.e. I've tried .csv as a source to the table but can't force an update. This way I could scrap the ipart & just import the values to a table.
The table also includes some txt comments which change with the ipart properties.
I'm looking for an API function that would allow me to change the active (or default?) row in the table of an iPartFactory model. I was hoping that such a function would be member or property of the iPartFactory object, but I’m not finding that to be the case.
View 4 Replies View RelatedI'm trying to get the value of the Category iproperty of the model on the active drawing sheet. This is not a problem in a single sheet drawing, but I'm not sure how to specifically retrieve the Referenced Document of the Active Sheet in s multi sheet drawing.
Here's what I have:
Option Explicit
Public Sub PartsListFilter()
'set reference to the drawing document
'assumes that a drawing is active
Dim oDraw As DrawingDocument
Set oDraw = ThisApplication.ActiveDocument
[code]........
How hide SketchesSymbol name in browser on active sheet?
View 1 Replies View RelatedUsing Modify Sheet List Tab - Rows Panel - New. It will not add a new row to my Sheet List.
View 2 Replies View Related First, it requires there to be a prompted entry text box in the title block named <SCALE>, is there any way to write to a textbox that is not prompted entry? The prompt when a new drawing or sheet is created is misleading and makes users think they need to manually fill out the prompt. Secondly, this code works on multi-sheet drawings but it concludes by making the last sheet active. Since we are triggering this rule before save it's a nuisance to have the drawing switch sheets everytime you do a save. Ideally, the current active sheet should remain active when the rule runs. Here is the
For Each oSheet In ThisApplication.ActiveDocument.Sheets
ActiveSheet=ThisDrawing.Sheet(oSheet.Name)
If oSheet.TitleBlock Is Nothing Or oSheet.DrawingViews.count=0 Then Exit Sub
oTitleBlock=oSheet.TitleBlock
oTextBoxes=oTitleBlock.Definition.Sketch.TextBoxes
[code]....
I am trying to complete an awsignment and I need to know how to select the Masks table to make the Masks panel active.
View 1 Replies View RelatedOften when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies View RelatedIs it possible to get the list of all the fonts and colors used in the active illustrator document (.ai file) ?
if yes then how?
Is there any way to insert a generic table into an assembly file. I don't want to create an iAssembly or use the data to configure the component in any way. I would just like to be able to maintain some design related information within the assembly file, similar to the tables that you can create in an idw. A table just like the iAssembly table would be fine, minus the iAssembly part or any sense of configuration.
View 4 Replies View RelatedI have problem when insert too lenght table from Excel.
Inventor cut column...I used Manage -> Insert Objec
I'm creating a routine to fill in my terminal strips. This routine worked perfectly in Vba but I'm now rewriting it for .NET...The problem is that I want to insert a block with attributes into different cells.The tables already exists. Below my function, I'm stuck on this part
Dim lonReturnedIds = FunBlockId() ' Calls the function FunBlockID to get the ID's of the attributes
' 0 = BlockID
' 1 = AttributeID of KleurB
' 2 = AttributeID of KleurO
TS.Cells(i, intPosition).Contents.Add()
TS.Cells(i, intPosition).Contents(0).BlockTableRecordId = lonReturnedIds(0)
TS.Cells(i, intPosition).SetBlockAttributeValue(lonReturnedIds(1), strCableConductor2WriteFirst)
Public Function Fun_StripUp(ByVal Po3dXY As Point3d, ByVal str_CableName As String, ByVal Str_CableConductor As String, ByVal strCable Conductor 2 Write As String, ByVal strCableConductor2WriteFirst As String, ByVal intPosition As Integer) As StringDim tAcadDoc As ApplicationServices.Document = ApplicationServices.Application.DocumentManager.MdiActiveDocumentDim myDB As.
[code]...
I am trying to insert a table using a data link. I set up the Link through the DataLink manager and then insert the table using a range. I click OK to insert the table and after a few seconds of thinking ACAD sits there with no table on the screen. When I look in XREFs, the DL is there but says it is unrefrenced. Tried multiple ways of entering or setting up information to no avail.
View 6 Replies View RelatedI have to make it possible to insert table by choosing any of it's corners. I cannot get it to work with choosing bottom corners - I can't get the exact height of the table.
The sample code of the one-row table is:
acApp.Document doc = acApp.Application.DocumentManager.MdiActiveDocument;Editor ed = doc.Editor;Transaction tr = ed.Document.Database.TransactionManager.StartTransaction();try{ BlockTable bt = (BlockTable)tr.GetObject(doc.Database.BlockTableId, OpenMode.ForRead); Table tb = new Table(); tb.InsertColumns(0, 24, 1); tb.SetRowHeight(4); tb.Columns[0].Width = 24; tb.Columns[1].Width = 24; tb.Cells[0, 0].TextHeight = 2; tb.Cells[0, 0].TextString = "some text"; tb.Cells[0, 0].Alignment = CellAlignment.MiddleRight; tb.Cells[0, 1].TextHeight = 2; tb.Cells[0, 1].TextString = other_text_from_variable; tb.Cells[0, 1].Alignment = CellAlignment.MiddleCenter; tb.HorizontalCellMargin = 0; tb.VerticalCellMargin = 0; tb.GenerateLayout(); tb.Position = // exactly... what should I do here? BlockTableRecord btr = (BlockTableRecord)tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite); btr.AppendEntity(tb); tr.AddNewlyCreatedDBObject(tb, true); tr.Commit();}catch (Autodesk.AutoCAD.Runtime.Exception ex){ ed.WriteMessage("
ERR: " + ex.Message);}finally{ tr.Dispose();}
Now... I'm trying to make 1-row table width the height 4. I should set tb.Position by just subtracting 4 from the Y-value of the clicked point... NOT.
tb.Height gives me 4. But I get the table with height 5.667. And I can't just use that value for subtracting, because even then, bottom-right corner is about 0.2 above or below clicked point... (X-value is correct and equals the clicked point's X-value.)
The same thing happens when I insert a table with the number of rows depending on the number of the records selected from DB. The same thing happens, when I use obsolete .NumRows and .NumColumns. What am I missing?
I'm preparing plans for individual land owners. I know I need to filter parcels "by hand", center, zoom, scale etc. I'm using labels to get parcels numbers on the plan but I have to add name into title block. I don't want to use feature labels because concat function does not work (I need to show parcel number) plus the name I need to put on is quite long (it doesn't fit in the drawing).
My question is: Is there a way to put text into drawing / title block from attached table or from feature properties of shp or sdf files?
I am trying to insert "Depth", "Counterbore", etc. Symbols in a revision table, but can't find ALT + XXXX for them. I did find the symbols in the Windows character map in AIGDT font group and they have Character codes but no ALT + codes? How to insert these symbols in a rev table?
View 1 Replies View RelatedI am having a problem opening older sheet sets from AutoCAD 2014.
I can select the .dst file, but when it "opens" I onlly have the icon in the seet set manager and nothing else, it is entirely blank.
I made a new sheet set, but now older versions of AutoCAD cannot read that one.
I am using AutoCAD 2013 and I working on a project of approxamitely 80 pages and I have a Sheet Set Manager set up.There are about 40 pages that have text saying Continuation on Sheet XX of YY. I managed to use a field for the total count (YY) however I need to link the XX to the another drawing. I have researched and failed miserably.
View 9 Replies View RelatedI'm trying to set up a title block template that will be used between several different sheet sets. I have entered the custom properties, then when I go to the title block and try to insert the fields with current sheet set custom the drop down box is empty and then when I try to type in the custom property name the link still does not function. Is there some trick that I'm missing, or is this function broken on AutoCad 2013?
View 6 Replies View RelatedI'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
I have data in an Excel spreadsheet that I want to insert into the drawing in a table format that replicates my spreadsheet formatting and creates AutoCAD entities as opposed to a bitmap image or the mess the TABLE command generates - I'm looking to keep my text consistent within the drawing and I still use the old SIMPLEX font.
View 5 Replies View Related