We are experiencing a case where the sheet list table will not insert into a page. It works on all other jobs, but this one won't let a sheet list table insert into any page, by any body.
I even tried inserting a block of the table from another set and then updating - all the lines disappeared.
We have done about 200 jobs with these, without trouble and this is the one giving us problems now.
I am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies View RelatedI am insert a sheet list table - Two Columns "Dwg #" and "Sheet Title" under the first category (building 1) each column works fine) then under category 2 (building 2) it gets the file name under the dwg #.
View 2 Replies View RelatedFrom Project Navigator, I R-click the Project in the SHEET tab. This is not "lit up" to choose.
I am in my cover sheet, paper space, with 51 sheets in the set.
I tried to use the Sheet Set Manager, but I have the same problem.
“insert sheet list table” is not active,
I couldn’t figure out in which cases the “insert sheet list table” (attached) gets not active.
This command is supposed to provide table of contents for the layouts specified in the set of sheets pane
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there a way to include custom sheet properties in the sheet list table?
AutoCAD Civil 3D 2012 (Primary),
Dell Percision T3500: MS Windows 7 64-bit SP1;
Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
I have a sheet list table setup and want to change the format for how the date shows up in a row. Is there a way to format each row/column?
View 9 Replies View RelatedI am trying to solve a problem. My company uses AutoCAD 2013. We set up a sheet set manager template that has custom properties linked to fields in an attribute block. Now we want to finish configuring a sheet list table. The problem is that we cannot get the sheet list table to look the way we want it.
In the sheet list table we add the drawing number, the revision, and then three titles (all from left to right). The three titles come from three separate attributes in the title block. The titles say the discipline (electrical) then the system type, then the particular drawing itself. We want to figure out how if possible, to have these three separate attributes in the same sheet list table cell.
We tried to do a multi-line text, which did place all three titles into one table cell, but then had issues with the multi-line text placing the three different titles into position on the title block.
I am not able to open Sheet list in Sheet Set Manager.......
View 3 Replies View RelatedI am trying to convert my Sheet List Table into an editable Excel or Word document.
View 1 Replies View RelatedI am trying to insert a table using a data link. I set up the Link through the DataLink manager and then insert the table using a range. I click OK to insert the table and after a few seconds of thinking ACAD sits there with no table on the screen. When I look in XREFs, the DL is there but says it is unrefrenced. Tried multiple ways of entering or setting up information to no avail.
View 6 Replies View RelatedI have data in an Excel spreadsheet that I want to insert into the drawing in a table format that replicates my spreadsheet formatting and creates AutoCAD entities as opposed to a bitmap image or the mess the TABLE command generates - I'm looking to keep my text consistent within the drawing and I still use the old SIMPLEX font.
View 5 Replies View RelatedI'm trying to add rows above rows in the middle of a table. The options under Rows are all grey/not available. The last row will allow me to add a row below and the top row will allow me to add a row above. I'm unable to Delete rows, too. The table is not listed as locked or anything. Aside from retyping the table, is there something I need to do to be able to edit the table?
View 9 Replies View RelatedWhat is the best way to Insert an Excel sheet into autocad?
View 4 Replies View RelatedCan't drag it, copy it...anything. I guess you're just never supposed to want your table on some other sheet than the one you created it on.
Oh wait; I know...I could just swap everything *else* on the two sheets....
Using Set Sheet Manager, I am trying to create an Office Standard Sheet Index Table.
I have begun by copying the Standard table and modifying it. I have adjusted the cell styles to reflect our colors and text types and sizes. I have also added two additional columns for revision number and revision date.
I have tried saving the new table ... and inserting a new table through the sheet set manager
the only tables i can bring in include the 2 original columns (sheet number and sheet title) and specified text font, size and color are maintained, but the additional columns and the column width are lost.
Ideally i would like the office format to be maintained...with little or no modification required of the user.
I have a template for sheet creation with all layers on, thawed, etc.When I insert a view on a sheet, there are VP layers that are frozen.I do not want these settings.
View 6 Replies View RelatedI am in ACAD 2012 and want to delete sheet sets from my "recent" list. Many of them are invalid now. How can I do this? I would expect it is a registry entry but I don't know where.
View 2 Replies View RelatedI am using the sheet list table to generate a table of contents. I add the "Drawing Revision Number" column to the table, but when it generates the list it does not include the field.
Is there any way to add the "Sheet Revision Number" instead since this is what property is actually adjusted in the sheet's properties? (i never change the "Drawing Revision Number")
OR is the solution to change the "Drawing Revision Number"? Where do I change this property at? Is this property applied to all sheets within a drawing?
In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
Using Modify Sheet List Tab - Rows Panel - New. It will not add a new row to my Sheet List.
View 2 Replies View RelatedOften when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies View RelatedIs there any way to insert a generic table into an assembly file. I don't want to create an iAssembly or use the data to configure the component in any way. I would just like to be able to maintain some design related information within the assembly file, similar to the tables that you can create in an idw. A table just like the iAssembly table would be fine, minus the iAssembly part or any sense of configuration.
View 4 Replies View RelatedI have problem when insert too lenght table from Excel.
Inventor cut column...I used Manage -> Insert Objec
I'm creating a routine to fill in my terminal strips. This routine worked perfectly in Vba but I'm now rewriting it for .NET...The problem is that I want to insert a block with attributes into different cells.The tables already exists. Below my function, I'm stuck on this part
Dim lonReturnedIds = FunBlockId() ' Calls the function FunBlockID to get the ID's of the attributes
' 0 = BlockID
' 1 = AttributeID of KleurB
' 2 = AttributeID of KleurO
TS.Cells(i, intPosition).Contents.Add()
TS.Cells(i, intPosition).Contents(0).BlockTableRecordId = lonReturnedIds(0)
TS.Cells(i, intPosition).SetBlockAttributeValue(lonReturnedIds(1), strCableConductor2WriteFirst)
Public Function Fun_StripUp(ByVal Po3dXY As Point3d, ByVal str_CableName As String, ByVal Str_CableConductor As String, ByVal strCable Conductor 2 Write As String, ByVal strCableConductor2WriteFirst As String, ByVal intPosition As Integer) As StringDim tAcadDoc As ApplicationServices.Document = ApplicationServices.Application.DocumentManager.MdiActiveDocumentDim myDB As.
[code]...
I have to make it possible to insert table by choosing any of it's corners. I cannot get it to work with choosing bottom corners - I can't get the exact height of the table.
The sample code of the one-row table is:
acApp.Document doc = acApp.Application.DocumentManager.MdiActiveDocument;Editor ed = doc.Editor;Transaction tr = ed.Document.Database.TransactionManager.StartTransaction();try{ BlockTable bt = (BlockTable)tr.GetObject(doc.Database.BlockTableId, OpenMode.ForRead); Table tb = new Table(); tb.InsertColumns(0, 24, 1); tb.SetRowHeight(4); tb.Columns[0].Width = 24; tb.Columns[1].Width = 24; tb.Cells[0, 0].TextHeight = 2; tb.Cells[0, 0].TextString = "some text"; tb.Cells[0, 0].Alignment = CellAlignment.MiddleRight; tb.Cells[0, 1].TextHeight = 2; tb.Cells[0, 1].TextString = other_text_from_variable; tb.Cells[0, 1].Alignment = CellAlignment.MiddleCenter; tb.HorizontalCellMargin = 0; tb.VerticalCellMargin = 0; tb.GenerateLayout(); tb.Position = // exactly... what should I do here? BlockTableRecord btr = (BlockTableRecord)tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite); btr.AppendEntity(tb); tr.AddNewlyCreatedDBObject(tb, true); tr.Commit();}catch (Autodesk.AutoCAD.Runtime.Exception ex){ ed.WriteMessage("
ERR: " + ex.Message);}finally{ tr.Dispose();}
Now... I'm trying to make 1-row table width the height 4. I should set tb.Position by just subtracting 4 from the Y-value of the clicked point... NOT.
tb.Height gives me 4. But I get the table with height 5.667. And I can't just use that value for subtracting, because even then, bottom-right corner is about 0.2 above or below clicked point... (X-value is correct and equals the clicked point's X-value.)
The same thing happens when I insert a table with the number of rows depending on the number of the records selected from DB. The same thing happens, when I use obsolete .NumRows and .NumColumns. What am I missing?
I'm preparing plans for individual land owners. I know I need to filter parcels "by hand", center, zoom, scale etc. I'm using labels to get parcels numbers on the plan but I have to add name into title block. I don't want to use feature labels because concat function does not work (I need to show parcel number) plus the name I need to put on is quite long (it doesn't fit in the drawing).
My question is: Is there a way to put text into drawing / title block from attached table or from feature properties of shp or sdf files?
I am trying to insert "Depth", "Counterbore", etc. Symbols in a revision table, but can't find ALT + XXXX for them. I did find the symbols in the Windows character map in AIGDT font group and they have Character codes but no ALT + codes? How to insert these symbols in a rev table?
View 1 Replies View RelatedI have over a 100pg plan set and have changed page numbers and added more drawings and deleted a few. so now we have to go through the entire Table of Contents and drawings and renumber everything. Is there a way to link the fields in the Table of Contents with the page numbers on the drawings?
View 2 Replies View RelatedI'm having a difficult time finding exactly how I set up the parts list table. I'm thinking that I must have the wrong terminology when searching.
A background on exactly what I am trying to accomplish. I am a cabinet maker and have made the final decision to use Inventor for my design program. I'm taking the self learning method and I get most of it, I feel like I'm on the edge of a breakthrough, but I seem to be stuck on the parts list and getting the information I need.
For a basic example, a shaker door. It has 5 parts; 2 stiles, 2 rails and a flat panel. I need to have the dimensions pop up in the parts list for all my pieces. Just basic length, width, depth, dado, etc. I guess that I felt it would be a piece of cake to configure Inventor, but for the life of me, I cannot find the information I need to go from a part file to shop drawings with dimensions and details.
I also need to make sure that I can get the driven dimensions to show up, since the rails (to the best of my knowledge) have to have driven dimensions. I assume that this is possible.
What I am trying to accomplish is something like what cabinet vision produces for documents. I chose inventor for the flexibility of design since I do some unusual things with cabinetry and cabinet vision just can't handle it.
I'm new to .net for autocad, but very familiar with c#. I studied some samples about creating a block from c#. I have a form for some basic input. When the user presses OK the code checks if the blockname is already in use. When no it creates the block using following
private void make_block() { double nextpoint = 0.0; double linedis = 7.3634; Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (Transaction tr = db.TransactionManager.StartTransaction()) {
[code]......
The code runs successfully (meaning i don't get any errors), but when I want to insert the block it isn't in the list of blocks.