I am insert a sheet list table - Two Columns "Dwg #" and "Sheet Title" under the first category (building 1) each column works fine) then under category 2 (building 2) it gets the file name under the dwg #.
View 2 RepliesFrom Project Navigator, I R-click the Project in the SHEET tab. This is not "lit up" to choose.
I am in my cover sheet, paper space, with 51 sheets in the set.
I tried to use the Sheet Set Manager, but I have the same problem.
We are experiencing a case where the sheet list table will not insert into a page. It works on all other jobs, but this one won't let a sheet list table insert into any page, by any body.
I even tried inserting a block of the table from another set and then updating - all the lines disappeared.
We have done about 200 jobs with these, without trouble and this is the one giving us problems now.
“insert sheet list table” is not active,
I couldn’t figure out in which cases the “insert sheet list table” (attached) gets not active.
This command is supposed to provide table of contents for the layouts specified in the set of sheets pane
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies View RelatedOften when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies View RelatedIs there a way to include custom sheet properties in the sheet list table?
AutoCAD Civil 3D 2012 (Primary),
Dell Percision T3500: MS Windows 7 64-bit SP1;
Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
I am trying to solve a problem. My company uses AutoCAD 2013. We set up a sheet set manager template that has custom properties linked to fields in an attribute block. Now we want to finish configuring a sheet list table. The problem is that we cannot get the sheet list table to look the way we want it.
In the sheet list table we add the drawing number, the revision, and then three titles (all from left to right). The three titles come from three separate attributes in the title block. The titles say the discipline (electrical) then the system type, then the particular drawing itself. We want to figure out how if possible, to have these three separate attributes in the same sheet list table cell.
We tried to do a multi-line text, which did place all three titles into one table cell, but then had issues with the multi-line text placing the three different titles into position on the title block.
I have a sheet list table setup and want to change the format for how the date shows up in a row. Is there a way to format each row/column?
View 9 Replies View RelatedI am trying to convert my Sheet List Table into an editable Excel or Word document.
View 1 Replies View RelatedIm trying to change the table style formatting and nothing seems to stick. I want to turn the border off in the title cell and only use a thick underline.
I change the schedule cell, save changes to the style and Ive tried saving as a new style but when I reinsert the cell format is gone. Back to the out of the box state.
Also, when I save the OTB style to my new A3 Sheet Keynote style the new style doesnt match what was saved.
I have two problems. I want to change the text size, font, and color to be consistent with my office standards. However I can not find where the Sheet List Style is stored or edited. Which brings me to the second issue, the HELP in Exchange is bogus. Like MANY of the help entries, it refers to incorrectly named or non existent features and commands. In this case it says to "Select the sheet list in the drawing, right-click, and click Edit Sheet List Table Settings." which would be fine, except there is no option in the right click menu named "Edit Sheet List Table Settings".
Clicking on the Manage tab on the ribbon and selecting style Manager, the selecting Documentation objects, then schedule table styles, yeilds...nothing. How can I edit something that has no options?
Hiding the style manager so that all you get when you click on help is a ding that tells you there is a command open, but does not bring the command window to the fore.
Is it possible to insert a project detail field in a sheet column?
View 2 Replies View RelatedI am not able to open Sheet list in Sheet Set Manager.......
View 3 Replies View RelatedWhen I publish my sheet to PDF, dimensions of my sheet is broken.
View 9 Replies View RelatedUsing Modify Sheet List Tab - Rows Panel - New. It will not add a new row to my Sheet List.
View 2 Replies View RelatedIs there any way to insert a generic table into an assembly file. I don't want to create an iAssembly or use the data to configure the component in any way. I would just like to be able to maintain some design related information within the assembly file, similar to the tables that you can create in an idw. A table just like the iAssembly table would be fine, minus the iAssembly part or any sense of configuration.
View 4 Replies View RelatedI have problem when insert too lenght table from Excel.
Inventor cut column...I used Manage -> Insert Objec
I'm creating a routine to fill in my terminal strips. This routine worked perfectly in Vba but I'm now rewriting it for .NET...The problem is that I want to insert a block with attributes into different cells.The tables already exists. Below my function, I'm stuck on this part
Dim lonReturnedIds = FunBlockId() ' Calls the function FunBlockID to get the ID's of the attributes
' 0 = BlockID
' 1 = AttributeID of KleurB
' 2 = AttributeID of KleurO
TS.Cells(i, intPosition).Contents.Add()
TS.Cells(i, intPosition).Contents(0).BlockTableRecordId = lonReturnedIds(0)
TS.Cells(i, intPosition).SetBlockAttributeValue(lonReturnedIds(1), strCableConductor2WriteFirst)
Public Function Fun_StripUp(ByVal Po3dXY As Point3d, ByVal str_CableName As String, ByVal Str_CableConductor As String, ByVal strCable Conductor 2 Write As String, ByVal strCableConductor2WriteFirst As String, ByVal intPosition As Integer) As StringDim tAcadDoc As ApplicationServices.Document = ApplicationServices.Application.DocumentManager.MdiActiveDocumentDim myDB As.
[code]...
I am trying to insert a table using a data link. I set up the Link through the DataLink manager and then insert the table using a range. I click OK to insert the table and after a few seconds of thinking ACAD sits there with no table on the screen. When I look in XREFs, the DL is there but says it is unrefrenced. Tried multiple ways of entering or setting up information to no avail.
View 6 Replies View RelatedI have to make it possible to insert table by choosing any of it's corners. I cannot get it to work with choosing bottom corners - I can't get the exact height of the table.
The sample code of the one-row table is:
acApp.Document doc = acApp.Application.DocumentManager.MdiActiveDocument;Editor ed = doc.Editor;Transaction tr = ed.Document.Database.TransactionManager.StartTransaction();try{ BlockTable bt = (BlockTable)tr.GetObject(doc.Database.BlockTableId, OpenMode.ForRead); Table tb = new Table(); tb.InsertColumns(0, 24, 1); tb.SetRowHeight(4); tb.Columns[0].Width = 24; tb.Columns[1].Width = 24; tb.Cells[0, 0].TextHeight = 2; tb.Cells[0, 0].TextString = "some text"; tb.Cells[0, 0].Alignment = CellAlignment.MiddleRight; tb.Cells[0, 1].TextHeight = 2; tb.Cells[0, 1].TextString = other_text_from_variable; tb.Cells[0, 1].Alignment = CellAlignment.MiddleCenter; tb.HorizontalCellMargin = 0; tb.VerticalCellMargin = 0; tb.GenerateLayout(); tb.Position = // exactly... what should I do here? BlockTableRecord btr = (BlockTableRecord)tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite); btr.AppendEntity(tb); tr.AddNewlyCreatedDBObject(tb, true); tr.Commit();}catch (Autodesk.AutoCAD.Runtime.Exception ex){ ed.WriteMessage("
ERR: " + ex.Message);}finally{ tr.Dispose();}
Now... I'm trying to make 1-row table width the height 4. I should set tb.Position by just subtracting 4 from the Y-value of the clicked point... NOT.
tb.Height gives me 4. But I get the table with height 5.667. And I can't just use that value for subtracting, because even then, bottom-right corner is about 0.2 above or below clicked point... (X-value is correct and equals the clicked point's X-value.)
The same thing happens when I insert a table with the number of rows depending on the number of the records selected from DB. The same thing happens, when I use obsolete .NumRows and .NumColumns. What am I missing?
I'm preparing plans for individual land owners. I know I need to filter parcels "by hand", center, zoom, scale etc. I'm using labels to get parcels numbers on the plan but I have to add name into title block. I don't want to use feature labels because concat function does not work (I need to show parcel number) plus the name I need to put on is quite long (it doesn't fit in the drawing).
My question is: Is there a way to put text into drawing / title block from attached table or from feature properties of shp or sdf files?
I am trying to insert "Depth", "Counterbore", etc. Symbols in a revision table, but can't find ALT + XXXX for them. I did find the symbols in the Windows character map in AIGDT font group and they have Character codes but no ALT + codes? How to insert these symbols in a rev table?
View 1 Replies View RelatedI have data in an Excel spreadsheet that I want to insert into the drawing in a table format that replicates my spreadsheet formatting and creates AutoCAD entities as opposed to a bitmap image or the mess the TABLE command generates - I'm looking to keep my text consistent within the drawing and I still use the old SIMPLEX font.
View 5 Replies View RelatedI'm trying to add rows above rows in the middle of a table. The options under Rows are all grey/not available. The last row will allow me to add a row below and the top row will allow me to add a row above. I'm unable to Delete rows, too. The table is not listed as locked or anything. Aside from retyping the table, is there something I need to do to be able to edit the table?
View 9 Replies View RelatedI'm having a difficult time finding exactly how I set up the parts list table. I'm thinking that I must have the wrong terminology when searching.
A background on exactly what I am trying to accomplish. I am a cabinet maker and have made the final decision to use Inventor for my design program. I'm taking the self learning method and I get most of it, I feel like I'm on the edge of a breakthrough, but I seem to be stuck on the parts list and getting the information I need.
For a basic example, a shaker door. It has 5 parts; 2 stiles, 2 rails and a flat panel. I need to have the dimensions pop up in the parts list for all my pieces. Just basic length, width, depth, dado, etc. I guess that I felt it would be a piece of cake to configure Inventor, but for the life of me, I cannot find the information I need to go from a part file to shop drawings with dimensions and details.
I also need to make sure that I can get the driven dimensions to show up, since the rails (to the best of my knowledge) have to have driven dimensions. I assume that this is possible.
What I am trying to accomplish is something like what cabinet vision produces for documents. I chose inventor for the flexibility of design since I do some unusual things with cabinetry and cabinet vision just can't handle it.
I'm new to .net for autocad, but very familiar with c#. I studied some samples about creating a block from c#. I have a form for some basic input. When the user presses OK the code checks if the blockname is already in use. When no it creates the block using following
private void make_block() { double nextpoint = 0.0; double linedis = 7.3634; Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (Transaction tr = db.TransactionManager.StartTransaction()) {
[code]......
The code runs successfully (meaning i don't get any errors), but when I want to insert the block it isn't in the list of blocks.
What is the best way to Insert an Excel sheet into autocad?
View 4 Replies View RelatedI have a sheet metal part which has several holes in, from which I have created a hole table. The hole table does not list all the holes in my part as I am only permitted to to select holes on one face of the part in the selected view. I have tried selecting all holes on the Isometric view however I cannt do this either.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
In some cases (especially with files imported from dxf format), the tables of print style are only with .stb extension but I need to use the Monochrome.ctb. How Can I load this table if it doesn't appear in the list?
View 1 Replies View RelatedCan't drag it, copy it...anything. I guess you're just never supposed to want your table on some other sheet than the one you created it on.
Oh wait; I know...I could just swap everything *else* on the two sheets....