I have data in an Excel spreadsheet that I want to insert into the drawing in a table format that replicates my spreadsheet formatting and creates AutoCAD entities as opposed to a bitmap image or the mess the TABLE command generates - I'm looking to keep my text consistent within the drawing and I still use the old SIMPLEX font.
View 5 RepliesI am trying to insert a table using a data link. I set up the Link through the DataLink manager and then insert the table using a range. I click OK to insert the table and after a few seconds of thinking ACAD sits there with no table on the screen. When I look in XREFs, the DL is there but says it is unrefrenced. Tried multiple ways of entering or setting up information to no avail.
View 6 Replies View RelatedHow can I display the object data of a layer in table format, with VB.net. or How can I display the attributes of a .SHP file, edit it and also add new point to it.
View 2 Replies View RelatedI'm preparing plans for individual land owners. I know I need to filter parcels "by hand", center, zoom, scale etc. I'm using labels to get parcels numbers on the plan but I have to add name into title block. I don't want to use feature labels because concat function does not work (I need to show parcel number) plus the name I need to put on is quite long (it doesn't fit in the drawing).
My question is: Is there a way to put text into drawing / title block from attached table or from feature properties of shp or sdf files?
We are experiencing a case where the sheet list table will not insert into a page. It works on all other jobs, but this one won't let a sheet list table insert into any page, by any body.
I even tried inserting a block of the table from another set and then updating - all the lines disappeared.
We have done about 200 jobs with these, without trouble and this is the one giving us problems now.
I'm trying to add rows above rows in the middle of a table. The options under Rows are all grey/not available. The last row will allow me to add a row below and the top row will allow me to add a row above. I'm unable to Delete rows, too. The table is not listed as locked or anything. Aside from retyping the table, is there something I need to do to be able to edit the table?
View 9 Replies View RelatedI have this table that's reading my table style. All cell formatting is set to General and middle center justification.
When I type in a number the formatting automatically changes from General to Whole Number and upper right justification. When I type in letters everything it fine.
Why using numbers changes the formatting? In the textstyle I have changed the cell formatting to Text but that doesn't work. If I select the table, right click and choose Remove Overrides it moves the numbers to Middle Center as set in the style.
I have a sheet list table setup and want to change the format for how the date shows up in a row. Is there a way to format each row/column?
View 9 Replies View RelatedI am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies View RelatedI've created a table (a door schedule for example).The data cell type properties is "general". The door # is "001". When I type this in, it switches to just "1" and the type is swiched to "whole number." Same for another cell with a number in it, it switches the cell type on me and I don't want what it switches to. Every time I try to switch it back it doesn't do anything.
How do I stop it from automatically switching, or at very least let me override?
I recently decided to see how the AutoCAD tables work. I was very happy to learn you could link your Excel spreadsheets with CAD. But now I have a problem.
After inserting the table it refuses to use the table style I have set up. The fonts do not want to change at all. I can change the colour of the text, but not the font.
PS: Using AutoCAD 2011
I have created a table style in ACAD 2012 with all of the cells formatted to what I need. The trouble begins when I bring in a BIAS excel data link to populate the table. I have tried every option in the insert table steps and have even tried all the different options under the modify excel link options. I have toggled the use excel formatting on and off, which does change the table size a small bit, but does not allow the table style to take affect.
I have attached a screen shot of the "good" and "bad" tables. The bad table is what the good table comes in as and it is also what happens everytime the table link updates. It always reverts back to the bad style and then I have to change the table back to the good one by hand - changing each column individually.
Is there a way to attach a data link to a table with the table style holding its shape and formatting?
This happens on all of my drawings and using all kinds of different excel links.
how to bring in the data link??
I have created a sample drawing, to illustrate to the design manager at work that we can use AutoCAD to assist us with the scheduling of materials, but I am unsure of all the ins and outs of it myself!
See attached drawing to make sense of the following:
Ordinarily we would use a panel reference number for all 50mm panels of identical length, i.e., all 1200mm panels (our standard width) will be assigned a panel code, often P01... etc etc. From the data extraction (EATTEXT) command, as you can see, all 50mm cleanroom panels under the 'name' column are according the block name, in this case, I've called it "Cleanroom Panel 50mm". Is there any way to assign an individual tag to all panels of equal length, yet maintain the same block - or is this simply asking too much?
The reason for this is that although the autocad generated table is ideal for quantifying and placing orders for materials, we are a design and build firm, all our construction workers will need to be able to identify where on a plan an individual panel is, i.e., all well and good to say one panel is 332mm long, and one is 350mm long, but he will need to know what panel is to be installed where...
How to plot a survey drawing with field data in text format, (using Autocad 2008, so that the point number and XYZ coordinates appear on the drawing.
View 1 Replies View Relatedi want to convert autocad drawing which indicates water depth data as text into txt format...x reference and y reference and the digital value indicated at the reference in xyz format...
View 3 Replies View RelatedHow can I rearrange the horizontale order of the table columns which made by (Extraction data).
I know how to rearrange it vertically, But horizontally that what I want to know. Example ( colomns order is : number, X, Y. How to change it to :X, Y , number )
What is the best way to insert a word document in to a autoCad 2010 drawing.Can you cut & paste ?
View 9 Replies View RelatedIs it possible to insert a second template into a drawing, so you can have two different titleblocks in layout (paperspace)
View 9 Replies View RelatedHow do I insert a lot map which is a pdf files in to my autocad drawing. I tried to use the insert but when I browse my files no pdf files show up?
View 3 Replies View Relatedhow do I attach or insert a drawing from one dwg file into another dwg file? I'm drawing some and i want a site plan off of a different file i just want to take it and but it in my new drawing without have to draw the site plan over
View 3 Replies View RelatedI have a lighting block I need to insert into a drawing. Who ever drew the block did so upside down (so the top is really the bottom). I can't, for the life of me, figure out how to "rotate" it so that the top is correct. When I rotate the block, it simply keeps the top the top. When I copy and paste it, it stays the same as well. I tried inserting it into a new drawing.
View 4 Replies View RelatedIn 2011 every so often I get this error "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created." This happens and I just go and click file or regen and sometimes it just saves the file other times it does not.
View 9 Replies View RelatedI converted a drawing in pdf format into dxf. I'm using Autocad 2012 to edit the file. The dxf conversion is good, but of course there is no difference between the diffent kind of lines.
I would like to select all lines which have an orientation of 30° with the horizontal and put them into a new layer. Is there a way to do that ? I though about using a filter.
Then I will edit the properties oh those lines (color, thickness, type....).
Users: Windows 7, AutoCad 2011 update 2 applied
Windows Server 2008 r2
Data stored on a network share
Network licenses on a separate server
My problem started when we moved all of the users data to a new Windows 2008 r2 server. Searching and file navigation was slow so we turned on Windows Search service. Greatly improved network searches (users do content as well as file name searches).
Then Autocad started having errors when trying to save or create dwf files. The error "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created." Users can save the drawing to the local drive without the error.
I have a drawing where I have placed all of my natural gas piping. I have all of the annotative blocks set to 3/32"=1'-0" and 1/32"=1'-0" scales. They are both correctly displayed in this drawing.
When I xref this drawing into another about half of the 1/32" blocks show up correctly. The other half are shifted to the right off of the plan. All of the 3/32" blocks show up correctly.
ideas on Drawing Revision Table / Record on Title Blocks that they would share?We are re-designing our Title Blocks and I was wondering if there was a different or better way of doing this, besides a static block with attributes.
View 2 Replies View RelatedI have a data-linked table (from an Excel 2007 file, 32-bit) in an Autocad 2010 drawing (64-bit, Windows 7 OS).
If the table is displayed as a single column, with table breaks off, the file will save within seconds.
If I enable table breaks, it will take at least 3-5 minutes for the drawing file to save.
I am unable to find any solution. I've tried using different table styles, different linked files/drawings, saving locally vs. on the network, headers and titles repeating vs not. The slowness is a major productivity killer.
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
I am trying to add a set of attribute data to a block that already exists within a drawing.
View 1 Replies View RelatedIs it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
View 2 Replies View RelatedI am trying to insert OS Tiles into a drawing using the insert x-ref command. I have managed to insert 192 tiles but still need to add 29 more tiles to complete. When I try to insert another x reference AutoCAD just goes into a continual loop. Have to force AutoCAD to crash after ten minutes.
I am using AutoCAD 2014 MAP and have just had a new system built (i5 processor, 8GB RAM).