how do I attach or insert a drawing from one dwg file into another dwg file? I'm drawing some and i want a site plan off of a different file i just want to take it and but it in my new drawing without have to draw the site plan over
View 3 Replieswhenever I click to attach a drawing reference nothing happens. I don't get the browse to file window.
I've tried using the GUI from the View menu / Palettes panel/external palette, Also from the command prompt by typing external references and attach still no joy.
I have all SPs installed. I tried exporting another user's profile and importing it to my CAD. Do I have to reinstall the software from scratch?
Is it possible to attache a PCG file created with ACAD 2013 in ACAD 2012? I ask because I keep getting the message "the point cloud data file is not valid!". I have tried using both x86 and x64 and get the same error. I have also tried with ACAD 2011 and get the same error. The file was created from a Leica PTS file.
View 2 Replies View RelatedWhat is the best way to insert a word document in to a autoCad 2010 drawing.Can you cut & paste ?
View 9 Replies View RelatedIs it possible to insert a second template into a drawing, so you can have two different titleblocks in layout (paperspace)
View 9 Replies View RelatedHow do I insert a lot map which is a pdf files in to my autocad drawing. I tried to use the insert but when I browse my files no pdf files show up?
View 3 Replies View RelatedI have a lighting block I need to insert into a drawing. Who ever drew the block did so upside down (so the top is really the bottom). I can't, for the life of me, figure out how to "rotate" it so that the top is correct. When I rotate the block, it simply keeps the top the top. When I copy and paste it, it stays the same as well. I tried inserting it into a new drawing.
View 4 Replies View RelatedI have a drawing where I have placed all of my natural gas piping. I have all of the annotative blocks set to 3/32"=1'-0" and 1/32"=1'-0" scales. They are both correctly displayed in this drawing.
When I xref this drawing into another about half of the 1/32" blocks show up correctly. The other half are shifted to the right off of the plan. All of the 3/32" blocks show up correctly.
I have data in an Excel spreadsheet that I want to insert into the drawing in a table format that replicates my spreadsheet formatting and creates AutoCAD entities as opposed to a bitmap image or the mess the TABLE command generates - I'm looking to keep my text consistent within the drawing and I still use the old SIMPLEX font.
View 5 Replies View RelatedI am having an issue with Autodesk Map 3D 201164 bit and Autocad Raster Design 64 bit. Everytime we insert a raster file into a drawing.The laptop freezes. I really thought it was because we were using XP 32 bit. We got an error message that we did not have enough RAM. After doing some research on this forum, I updated to Windows 7.
View 4 Replies View RelatedWhat is the simplest way to insert a PDF file(drawing) into an Autocad 2011 drawing???
View 2 Replies View RelatedHow to insert *.jgw file into a AutoCAD *dwg file ?
View 4 Replies View RelatedI am working with surveying points and what I used to do was insert the dxf file containing the points to my drawing and they would be inserted with their correct scale. However, now in AutoCAD 2013, when I insert them they are in a different scale and I must adjust them. Is there anyway to have their original scale carry over in 2013?
View 4 Replies View RelatedI notice that whenever I plot with DWG to PDF.pc3 the filename for the PDF always comes out as:
(.dwg file name)-(paper space name).pdf
Is there any way to change the inputs for this? Let's say for example I wanted AutoCAD to automatically insert a timestamp at the end for me, so that the filename is always:
(.dwg file name)-(paper space name)-(date and time here).pdf
This would keep me better organized and also make it easier for my less computer savvy coworkers to go through old drawings and see changes between drawings. I know I could type it by hand every single time, but why do that if there's a way to have AutoCAD do it for me
I am trying to insert OS Tiles into a drawing using the insert x-ref command. I have managed to insert 192 tiles but still need to add 29 more tiles to complete. When I try to insert another x reference AutoCAD just goes into a continual loop. Have to force AutoCAD to crash after ten minutes.
I am using AutoCAD 2014 MAP and have just had a new system built (i5 processor, 8GB RAM).
I am trying to attach a dgn to my drawing and cannot seem to get it to come in correctly. It is coming in about 4.5 feet off, My units in the micro station drawing are set to US survey feet, and I have my units set in my drawing to engineering and unitless, I have tried feet and that did not solve the problem either .
View 4 Replies View RelatedI have Autocad Civil 3d 2011 and recently the software was corrupted so our IT guy reinstalled everything. Now when I attempt to attach a PDF I get an error box that reads
This file cannot be opened.
The problem can be caused by several things:
- The data in the file is corrupted
- The file is an earlier format that is no longer supported
- The file format is not supported
Try to obtain a better copy of the file, recreate the file using
different settings, or convert the file to a supported file format.
Now before the reinstall, I never had an issue...never saw this message before and have attached hundreds of PDFs to drawing. The only thing I will add is around the time of the reinstall, I also had installed NITRO PDF software. I believe this installation came after the problems started...just cant remember, so I wanted to throw that out just in case.
I'm trying to attach several .pdf files into a drawing. Files that were sent to me attach with no problem, but when I scan sheets in using an HP LaserJetPro Printer/Scanner I get the following error:
PDFATTACH - Invalid Error
The problem can be caused by several things:
-The data in the file is corrupted
-The file is from an earlier format yadda yadda
-The file format is not supported
Try to obtain a better copy of the file, recreate the file using different settings or convert to a supported file format.
When I check the properties of the files I can attach -vs- the files I can not attach, I find no difference in version, security details etc., so I'm pretty sure the problem isn't that the file isn't supported of from an earlier version. I've tried several different files from my scanner and none will attach. I have also tried scanning using different settings with no joy.
AutoCAD 2012LT, SP1
Windows 7 Ultimate SP1, 64 bit
HP Scan HP U CM1410 MFP Series Scan
Adobe Acrobat Standard V 9.4.6
As an engineering company we have started to convert hundreds of our drawings from AutoCAD to PDF using a batch utility.
However every file that is converted into a PDF file is opened by a PDF Viewer. We want to prevent this.
I opened my *.pc3 file and removed the check from the appropriate box. See below
I press OK, then save the file and close. However when I reopen the file, I see the box for Openining in PDF Viewer has been rechecked. No matter what I do, I cannot permanently remove the check from this box.
My autocad will no long attach a pdf. I get as far as selecting the pdf, but then i wait, and wait, for the next dialog box to choose path, insertion point, page etc....it never appears and I have to cancel ....getting very behind with my work. (By the way I have done this a hundreds times over, so not sure what's changed).
View 6 Replies View Relatedi know how to attach a jpeg to my autocad drawning but that is not doing the job, i have to re-attach the jpeg every time I re-open the file. So my question is how do I insert it to my dwg? Is it the same method as pdf (attachpdf)?
View 1 Replies View RelatedI write a program, this program needs to insert some standard illustrations. I made these standard illustrations into different blocks. And I store these blocks in a dwg file. Everytime I need to insert some illustrations, I just click the mouse on the current drawing, I want the illustration inserted. These means the following points:
(1) Import the blocks to the current drawing, if the blocks have already been imported, then do nothing.
(2) Specify the insert point by clicking the mouse, and I want the block's insert point to coincide with the mouse clicking point.
Can I attach a raster image so it is part of a drawing and travels with it. If so, how do I do it? I realize it would increase file size. I often add reference .jps to my drawings for the shop. I'd like to be sure that when the file is moved to a different folder or archived it includes the image.
View 9 Replies View RelatedI have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
Autocad 2012
When attach image (tif) with no path. is saved, de image will be saved without a path. dir. Only when we change the image (with RasterCAD) when we now save the drawing the hole path dir. will be saved.
When we used AutoCAD 2006 this will not be the case. The tiff. will stay no path. We move/copy drawing with image to other dir. very often.
-Originel
... dwg/tif
-To-Built
... dwg/tif
-As-Built
.... dwg/tif
Problem is that the image will be saved in the wrong dir.
-Originel
... dwg/tif
-To-Built
... dwg/tif
-As-Built
.... dwg/tif
I have a Base.dwg where I xref-Attach a Proposed.dwg file into. I changed the Color=gray and Plot Style=Existing of the Proposed xref in the Base. Visretain=1.
I now create a Sheet.dwg and xref Base into it (and Proposed comes along too). The settings for Proposed are not what I have set in the Base file, they are what's in the original Proposed file.
Can I get these settings to come through? I cannot go into the original Proposed file and change settings.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
Size of Drawing file is 4.33 mb. But Can not Open. A message appears " Drawing File Invalid"
Can I Retrieve the data.? No backup file is available in my system. I have tried with recovery tool but unable to get original data
for Any other option .
When I try and open a file from the network that another user already has open, I receive the following message:
"Cannot find the specified drawing file. Please verify that the network drive is available and the file exists".
This happens when using Novell Netware. Is there a resolution?
I don't know what happened, but my autocad file doesn't open up with a message "drawing file is not valid". I opened it at home once in Autocad 2012 - Student version and I open it at school usually every other day in Autocad 2012 - Educational version and it opens up properly at both places. But this tuesday I tried to open it, and it didn't open. I really need this file to be recovered because this drawing was complicated and I finished it. So, it will be a real pain to do it all over again plus the time I will waste. I am going to attach that file here.
View 8 Replies View RelatedWhy plotting the drawing in pdf file produces a NOT to scale drawing?
I’m wondering if there is a way to print the drawing in a pdf file such that the drawing scale is kept correct.
For example, I tried to print the drawing shown in the screenshot in 1/100 scale using the Adobe pdf printer, but later, as I printed the pdf file, the printed drawing is not to scale!
Why the pdf file doesn’t keep the scale?
Is there a way to “preserve” the scale while printing the drawing in a pdf file?
I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))