My autocad will no long attach a pdf. I get as far as selecting the pdf, but then i wait, and wait, for the next dialog box to choose path, insertion point, page etc....it never appears and I have to cancel ....getting very behind with my work. (By the way I have done this a hundreds times over, so not sure what's changed).
View 6 Repliesi know how to attach a jpeg to my autocad drawning but that is not doing the job, i have to re-attach the jpeg every time I re-open the file. So my question is how do I insert it to my dwg? Is it the same method as pdf (attachpdf)?
View 1 Replies View RelatedAutocad 2012
When attach image (tif) with no path. is saved, de image will be saved without a path. dir. Only when we change the image (with RasterCAD) when we now save the drawing the hole path dir. will be saved.
When we used AutoCAD 2006 this will not be the case. The tiff. will stay no path. We move/copy drawing with image to other dir. very often.
-Originel
... dwg/tif
-To-Built
... dwg/tif
-As-Built
.... dwg/tif
Problem is that the image will be saved in the wrong dir.
-Originel
... dwg/tif
-To-Built
... dwg/tif
-As-Built
.... dwg/tif
whenever I click to attach a drawing reference nothing happens. I don't get the browse to file window.
I've tried using the GUI from the View menu / Palettes panel/external palette, Also from the command prompt by typing external references and attach still no joy.
I have all SPs installed. I tried exporting another user's profile and importing it to my CAD. Do I have to reinstall the software from scratch?
how do I attach or insert a drawing from one dwg file into another dwg file? I'm drawing some and i want a site plan off of a different file i just want to take it and but it in my new drawing without have to draw the site plan over
View 3 Replies View RelatedIs it possible to attache a PCG file created with ACAD 2013 in ACAD 2012? I ask because I keep getting the message "the point cloud data file is not valid!". I have tried using both x86 and x64 and get the same error. I have also tried with ACAD 2011 and get the same error. The file was created from a Leica PTS file.
View 2 Replies View RelatedI have a Base.dwg where I xref-Attach a Proposed.dwg file into. I changed the Color=gray and Plot Style=Existing of the Proposed xref in the Base. Visretain=1.
I now create a Sheet.dwg and xref Base into it (and Proposed comes along too). The settings for Proposed are not what I have set in the Base file, they are what's in the original Proposed file.
Can I get these settings to come through? I cannot go into the original Proposed file and change settings.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
Right now i am using model space only i didn't use the layout but i want create the A3 layout. And I need to attach our customized title block into the layout, how to make it the A3 lay out size and how to attach the title block into layout ?
View 2 Replies View RelatedThis is one issue that I really hate most in the mids of my drawing progress. Why my cursor are suddenly become invissible although it still active? My only option here to make visible again is to save and re-open it .
View 1 Replies View Related when I try to open the program I get this message:
The application failed to initialize properly (Oxc0000034) Click on OK to terminate the application.
My application has suddenly started to link the hatch pattern to the area boundaries.
The objects remain on their own layers, but I am not able to delete the hatch pattern without deleting the boundaries.
I cannot edit the hatch pattern either as the application no longer recognises the hatch pattern.
Have i changed a setting unwittingly?
why i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
View 1 Replies View RelatedI tried to attach a PDF into a model and all it does is freeze up and AutoCAD crashes. Is this a known bug or is it me?
View 4 Replies View RelatedI'm using AutoCAD LT 2013. When attempting to attach a PDF as an underlay, I go to the Insert tab, choose "Attach" from the Reference panel, pick the PDF I want, and then...nothing. No dialog boxes come up, I get no error messages, it just doesn't do anything at all. I just upgraded my RAM and I know the rest of my specs are up to par, and I did get this feature to work once, but now it doesn't do anything.
View 9 Replies View RelatedOK I'm running AutoCAD Civil 3D 2012 -
So I've had this issue for a while - I try to XREF in a PDF an it just freezes up. The command line is stuck on _PDFATTACH and nothing happens. And it's not like it'd totally frozen either because as soon as I press escape it comes right out of it, so then I save the PDF down to a JPEG or TIFF and don't worry about it for a while. Still, it is quite annoying especially when I would like to use PDF Layers but can't.
How to link a jpg to an object? Map 2005 was a while ago and I haven't done it since then.
View 3 Replies View RelatedI am trying to attach a dgn to my drawing and cannot seem to get it to come in correctly. It is coming in about 4.5 feet off, My units in the micro station drawing are set to US survey feet, and I have my units set in my drawing to engineering and unitless, I have tried feet and that did not solve the problem either .
View 4 Replies View RelatedI used pdf attach to insert a pdf into the drawing. I have a plan drawing with viewports that references the drawing file. I tried to turn off the layer in one viewport while leaving the layer turned on in another viewport but i could not get it to plot correctly. It's off in my drawing but when i go to plot its on in all viewports. What is the reason that this happens? my plan file is too large i may have to post it seppartly
View 7 Replies View Relatedi have 12 base maps (transportation.dwg, utilities.dwg, etc) and each of these base maps is attached to a data source (.mdb). when creating a new drawing and inserting these basemaps in the Task Pane by Attach Drawings & Query, i loose the connection to the data source in the new drawing
is there a way to have the datasource carry through and retain the attachment to new drawing?
also, in alot of maps we create we Xref (Transportation.dwg) and we loose the datasource in that situation too.
i'm new at this so hopefully my question makes sense.
I have Autocad Civil 3d 2011 and recently the software was corrupted so our IT guy reinstalled everything. Now when I attempt to attach a PDF I get an error box that reads
This file cannot be opened.
The problem can be caused by several things:
- The data in the file is corrupted
- The file is an earlier format that is no longer supported
- The file format is not supported
Try to obtain a better copy of the file, recreate the file using
different settings, or convert the file to a supported file format.
Now before the reinstall, I never had an issue...never saw this message before and have attached hundreds of PDFs to drawing. The only thing I will add is around the time of the reinstall, I also had installed NITRO PDF software. I believe this installation came after the problems started...just cant remember, so I wanted to throw that out just in case.
I'm trying to attach a DWG file to my post but it is appearing not to let me. Shouldn't I be able to attach that type of file? Or is there another file type I should be using?
View 6 Replies View RelatedI'm trying to attach several .pdf files into a drawing. Files that were sent to me attach with no problem, but when I scan sheets in using an HP LaserJetPro Printer/Scanner I get the following error:
PDFATTACH - Invalid Error
The problem can be caused by several things:
-The data in the file is corrupted
-The file is from an earlier format yadda yadda
-The file format is not supported
Try to obtain a better copy of the file, recreate the file using different settings or convert to a supported file format.
When I check the properties of the files I can attach -vs- the files I can not attach, I find no difference in version, security details etc., so I'm pretty sure the problem isn't that the file isn't supported of from an earlier version. I've tried several different files from my scanner and none will attach. I have also tried scanning using different settings with no joy.
AutoCAD 2012LT, SP1
Windows 7 Ultimate SP1, 64 bit
HP Scan HP U CM1410 MFP Series Scan
Adobe Acrobat Standard V 9.4.6
I am just wondering if it is possible to attach the images in PDF format to DWG file? In any updated version of AutoCAD?
View 8 Replies View RelatedIs it possible to affix a point light to an object so it moves with it when you move the object? I know you can simply select both and move 'em together. But I made a fixture with a lot of point lights on it and it's a pain in the ass to try to select everything in order to move it and position it.
View 2 Replies View RelatedI was out of town for a week and I think someone messed around with my CAD settings while I was gone. Now when I click Insert->DWG Reference, AutoCAD brings up a dialog that says: "Path to DWG file to attach:" instead of bringing me to a windows explorer type menu where I select the file to attach like it always has in the past. I can still attach xrefs by typing in xref and doing it through that menu, but what setting was changed?
View 4 Replies View RelatedI have made thousands of sheet metal parts and their associated drawings without issue but this time, I made a part and attempted to make a drawing but dimension lines won't attach to certain geometry in the drawing. It acts like it will until I click the second line for the dimension then it errors, telling me the same error message that comes up when you delete a feature that previously had a dimension.
I also can't place an origin for doing a hole chart, for example. It just turns purple and says it isn't attached even though it clearly is.
For retrieving information about attach DWG file there is a API call "db.GetHostDwgXrefGraph(true)"
Similarly is there any API call for Attach Image files
I am using "Attach Text to Leader" to add information about ballooned items to the balloon leader. The same information is needed for each balloon leader as shown below.
<COMPANY>, <DESCRIPTION>
<PART NUMBER>
I would like to just copy the fields from the first "Attach to Leader Text" and paste them in the subsequent "Attach to Leader Text" instances, instead of picking the "Type" and "Property" from the pull down lists for each of the three property I want to access, each time I place a "Attach to Leader Text" .
The problem is the fields in the subsequent Attach to Leader Text pasted instances do not automatically link to iProperties on the ballooned item? how to automate this procedure/
I just upgraded to Civil 2011 from 2009 and a drawing I was working in, which had a database attached, is no longer working. Fine. I understand that upgrading may cause some things to not work properly.
So, I try to attach that same database and I get an error message that reads:Failed to create the data source file:
Database2
I tried creating a brand new database with newly imported information and it did not work. I tried creating a brand new database with no information , and still I get the same message.
Can you attach text (qty or other info) to the side of a baloon or a point on the model view? If so can the qty update automatically?
View 3 Replies View RelatedI’m trying to attach my deform text to my gear and make it permanent. what I was trying to do was get the text to curve and the only option I see that makes it curve the way I want it look is deform path is there another I can it I will post picture what I’m trying do and did see any video YouTube how to curve text
View 0 Replies View Related