AutoCAD Inventor :: Scale In Title Block - No Prompted Entry / Keep Current Sheet Active
Apr 9, 2013
First, it requires there to be a prompted entry text box in the title block named <SCALE>, is there any way to write to a textbox that is not prompted entry? The prompt when a new drawing or sheet is created is misleading and makes users think they need to manually fill out the prompt. Secondly, this code works on multi-sheet drawings but it concludes by making the last sheet active. Since we are triggering this rule before save it's a nuisance to have the drawing switch sheets everytime you do a save. Ideally, the current active sheet should remain active when the rule runs. Here is the
For Each oSheet In ThisApplication.ActiveDocument.Sheets
ActiveSheet=ThisDrawing.Sheet(oSheet.Name)
If oSheet.TitleBlock Is Nothing Or oSheet.DrawingViews.count=0 Then Exit Sub
oTitleBlock=oSheet.TitleBlock
oTextBoxes=oTitleBlock.Definition.Sketch.TextBoxes
[code]....
When creating a title block I use iProperties and Prompted entry.
Now I want to place all entries and properties in a form so that I have everything together.
With the iProperties it works because you can select the iproperties when you create the form but I can not select the prompted entry to place in the form
Is there a way to select the prompted entry to place in the form?
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I am using Inventor 2012. I want to put a label with a prompted entry. So I did this,
SCALE: <scale>
However, when filling out the symbol it only puts in the scale without the label. The reason I am doing this is because my text is right justified and I need the label to move with the text.
I use a CommandManager.Pick command to select my drawing view and i want to put information of this view to a prompted entry in my sketched symbols, i have many same symbols in my page and i want to put a different description for each symblos but with a same prompted entry name, ex.: <NAME>
have default text for a Prompted Entry in a Border. I have not found a way to do this other than creating a custom iProperty, which is not an option, since it is not our title block / border.
I'm trying to set up some new title blocks, I have some "prompted entry" Properties that I want to incorporate, I've got them in the title blocks OK but I can't seem to get em to return a default value, the prompts are all coming in blank when the dialog box comes up. I have set the defaults to what I need on the original ANSI template with the new title block, but when I create a new drawing using that template, the title block comes in without any values set. Is there a way of setting them to return a default value initially that you would change if required, I'm sure I'm missing something very basic!!
Also, in the 'edit property' fields dialog box, there does not seem to be a way of inserting symbols into the value field, have I not turned on the right variable, or missed have I something else??
I have been attempting to automate some prompted entry (PE) values using iLogic and the SetPromptResultText command.
The command works on the customer-supplied template I have if I create a new PE called <DELETEME> - my code also works on this new PE even if I delete the "<" & ">" from either end of the string so it becomes "DELETEME".
The command doesn't work on the customer supplied fields of "PURPOSE OF ISSUE" & "PROJECT REF No" but if I add < & > to either end (so they become "<PROJECT REF No>" & "<PURPOSE OF ISSUE>" respectively) and modify my code to look for that instead, lo and behold it works.
why it works with the "<" & ">" on the ends of the string but not without?
My guess is that the "<" & ">" allow the PE to have spaces and without it Inventor 2013 throws the dummy in the dirt and refuses to play nice! - Just tested that theory and it's clearly cobblers.
Here's the sub-routine I wrote (with the working "<" & ">" still in place):
Sub UpdatePromptedEntries(oDoc As DrawingDocument)'assumes the oDoc is activatedDim oPromptEntryDim actSheet As Sheet = ThisApplication.ActiveDocument.ActiveSheet'For Each oSheet In ThisApplication.ActiveDocument.SheetsFor Each oSheet In [code]........
Is it possible to write multiple prompted entry fields down in a single pass? As it is now, you can see the taskbar reporting as it writes down each line.
Essentially i've got 6 different fields i'm trying to write down using code like shown below:
If oTB.GetResultText(oTitleBox1) <> Me.Title1.Value Then Call ThisApplication.ActiveDocument.ActiveSheet.TitleBlock.SetPromptResultText(oTitleBox1, Title1.Value)End IfIf oTB.GetResultText(oTitleBox2) <> Me.Title2.Value Then Call oTB.SetPromptResultText(oTitleBox2, Title2.Value)End If
Just wondering if there's a way it can be written down in a single pass to save time or if it's a limitation of prompted entry text.
I took an existing title block out of another document and pasted it into my 'standard.idw' file, modified it, made it the default title block and it looks pretty good. Problem is, having saved the 'standard.idw' file it saved it under a project header and now everytime I open said new drawing I get the error that it is not part of my existing project. Obviously.
Is there a way to create this file, with my new title block and not get this error, supress or have it projectless?
Also, with that in mind my other problem, which I am sure is related, is that I put an image in my title block, which gives me e error that my picture is not located in the current project. Currently I bypass that one by hitting skip and it still retains my image, which is fine.
These two things together are slight annoying but I can live with it until I deduce a way to kill these errors.
I am trying to get the scale of the base view in my titleblock. I have searched, the conclusion that as of Inventor 2012, this still can not be accomplished without add-ons?
how to create a text field, in an IDW, that will link (look) at the scale factor of a "Base View" in the same IDW? I am trying to create a text field on my title block that will identify the "Base View" scale automatically.
I've created a custom title block. I'd like to use VB to fill in this title block using info obtained from an Excel Spreadsheet; Company Name, Location, Drawing Title, etc.
how do you get the scale to show up properly in the title block? I've been searching and finding nothing on this issue, with exception of Autodesk personnel telling users to use the scale display on the views. I know it's not the "Autodesk way" of doing things, but my company has been putting the main view scale in the title block for over 30 years.
I've been using Patrick de Stobbeleir's "iProperty Collection" utility since Inv11, and it does the job. The thing that bugs me, though, is that I can't figure out how to get the FirstViewScale:x custom properties to work intelligently in my title blocks. I just use the property FirstViewScale in my title block, which displays the scale of the first view put down...no matter what the sheet.
how I can use the FirstViewScale:x property in title blocks such that x is the sheet number? So far we just have the first sheet use the FirstViewScale, and then subsequent sheets use a prompted entry (I know it's an ugly work-around).
Is there a way to change the default margin offsets (i.e. the distance between the edge of your border or title block to the edge of your paper), without using the "Insert Drawing Border" option?
I would have thought you could do this through the "Edit Sheet" or "Define New Title Block / Border" options. I have multiple customized title blocks, which each require their own margin offsets.
I moved the hole table from the original sheet to an other, but the fields in the title block of the new sheet don't update with the iproperties of the model
I'm trying to unskillfully crash my way through writing a VBA program for modifying Inventor drawing border info, and have managed through cannibalizing other programs to achieve 95% of what I wanted (ie the iproperties part).
Prompted Entries via VBA..I'd like to create a sync 'Prompted Entries' from sheet 1, across all sheets button.
The 4 prompted entry fields are always..I'd love some VBA code that could read the above 4 Prompted Entry values from Sheet:1 and then sync these values across multiple drawing sheets within one .idw file if more than one sheet was present.
I use prompted entries in the title blocks in some sheets in my drawings. I then use iLogic to fill in the prompted entries. Is there a way to turn off the prompted entries box when I create a new sheet?
Is there something other than a prompted entry that is not linked to a file (drawing, part, or assembly) that can be placed in a title block and filled in with iLogic?
How to add a new sheet with my title block. I am a little confused on this so far. I have read the autodesk 5 parts to sheet set manger and there is allot of things I'm not sure of. The title block is the first
I already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
I have the below code (from a user here on the forum) which works great for aligning text, mtext and blocks to 2 points. For annotative entities, it respects the rotation angle for mtext and text.
ie I have an mtext object at 1"=20' scale and at 1"=40' scale. I run the command when the current annotative scale is 1"=40'. The object at 40' scale has changed, but the 20' scale is unchanged. This is working as I would like it to.
But for annotative blocks, it gets weirded out. In the above example, the block at 40' will rotate, but so will the attributes at 20' scale. But linework and hatching at 20' scale will be unchanged. it looks really weird. how to get it to play nice with blocks. Ideally, I'd like the block to be at different rotation angles in different annotative scales.
(defun C:R2P (/ ss ang edata); = Rotate objects to align with 2 Points (setq ss (ssget '((0 . "*TEXT,INSERT"))) ang (angle (getpoint " First alignment point: ") (getpoint " Second alignment point: ")) ) (repeat (sslength ss) (setq edata (entget (ssname ss 0))) (entmod (subst (cons 50 ang) (assoc 50 edata) edata)) (ssdel (ssname ss 0) ss) ))
One of the guys here has created a title block which has a scale field in it, this field reads the scale at which the title block is brought in, by use of an invisible attribute (he used the block in model space so that's why I scale them up). When he xref the dwg into my main drawing all is fine and the scales are as they should be but when he prints, the scales all show 1:1 on the print and in the main drawing. Could this be due to the fact that the xref is brought in at 1:1? But we can't see why this would change it as the block is obviously still at e.g. 1:50 in the xref.
After creating a pdf.... when printing that pdf at non scale, the edge of the title block gets cut off. how can I fix that in adobe still using non scale format.
I'm not up to speed in configuring title blocks with sheet set manager and I've come into this situation unexpectedly.
I had to come up with a set of P&P sheets in a hurry to assist a contractor in providing a rough estimate for a sewer run, so I generated the sheets using the preconfigured imperial sheet set template. Afterwards I've switched out the border and title block generated by the template with our standard blocks. Our block attributes are old school and do not use fields. Now I am trying to upgrade those old attributes by replacing them with fields that reference the Sheet Set attributes.
Here is the problem: when inserting the field for the sheet number I can either use the CurrentSheetNumber or the SheetSetPlaceholder attribute. If I use CurrentSheetNumber, the title block shows the correct sheet number for the current sheet (the sheet I am making the edits from). However all the other sheets show that same number. In other words the fields do not show the corresponding sheet numbers from SSM. If I use SheetSetPlaceholder none of the title blocks will update to show the sheet number.
I believe I should be using the placeholder field but I can't get it to synchronize it with the SSM. Is there a way to make this work?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1 WIN 7 64 PRO HP Pavillion h8xt, i7 2600, 12 GB RADEON 6450, 1 GB [URL]
