Is there a way to change the default margin offsets (i.e. the distance between the edge of your border or title block to the edge of your paper), without using the "Insert Drawing Border" option?
I would have thought you could do this through the "Edit Sheet" or "Define New Title Block / Border" options. I have multiple customized title blocks, which each require their own margin offsets.
I'm having an error with Ilogic parameters.I just wanna change the border and the title blocks with Ilogic. This should be simple. Isn't this?
View 2 Replies View RelatedI use two different measuring system IMPERIAL and METRIC.
What I want is to be able tell at a glance, by having different color border and Title-block Text is which one of the system of units I'm using
So what I'm wanting to do is create a Metric Sheet template with on color, Border, Title Block Text and a different color for the Imperial.
I've tried changing the color using the Style Center but that affects both templates, I've tried editing the title-block text saving the template but on opening it has changed back to the defaults set in the style settings and dose not hold those that I set.
What I don't what to be doing is changing them after opening, as at some stage I'll forget.
Is there a way to access any data of any Border in a Drawing files when creating a sketch in the file?
I'm trying to make a Title Block that take up the whole length of the Border bounded page and 10 mm high, anchored on the bottom.
Currently I had the Default Border "changed" by Inserting it and changing the margins to fit to approximately my printer's printable area. It seems at this stage when I created a new title block defn I'm basically given a blank sketch with the origin at the bottom left as my only "snap point".
I found one through subject suggestion about using iLogic to change the size, but that isn't exactly what I'm trying to do as that seems just a switch for different Title Blocks that's been made up.
I thought about just drawing the title block in with the border, but I don't think that's the right way to do it.
Is there any way to draw your Title block in this case beside manually figuring out how big the Border is and dimension with that raw number?
(Just curious as it would be just a simple subtraction, but if I changed the Border margin I would have to repeat the arithmetic...)
When i create a drafting i use ISO.idw template. I delete the default title block and the default border and then i create my personal title block and border. How to save the new title block and the new border somewhere in "Inventor's memory" and use them in other draftings?
View 1 Replies View RelatedWe want to use our AutoCAD company standard templates within Inventor. I’ve followed the procedures to accomplish this under the heading:
Create a .dwg template in Autodesk Inventor from an AutoCAD .dwg template
This works without any problems. Inventor is able to recognize the size of our template border (20.75” x 33”) and correctly selects a sheet format of 24” x 36”. The template border is centered on the 24” x 36” sheet just as we would like it (see attached).
The template is used to create a new Inventor .dwg, and base views are placed and annotated. No problems, everything looks good. The new drawing is saved and Vaulted. However, at some point Inventor "shifts" the location of the template on the 24” x 36” sheet format (see attached). This action is unpredictable. The drawing might be checked-out and checked-in several times before the “shift” happens. When it does we have to re-locate the views and other text annotation to suit the new title block & border location.
How can we lock the position of the template border & title block? (Should be noted that we need to keep our template positioned such that the bottom left corner is at 0,0,0 when it is opened in AutoCAD.)
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
I placed a Sheet Propertie called Sheet Number in my title block.
I want only my sheet number in my title block and not the follow number.
I found the code made bij Curtis Waguespack and changed Mid to Left.
In the message box it shows the number i want but in the title block it shows only the follow number.
My sheet number is 400:1
why dusn't show only the number 400 in the titleblock?
DimoSheetAsSheet
DimSheetNumberAsString
i = 1
ForEachoSheetInThisApplication.ActiveDocument.Sheets
SheetNumber = Left(oSheet.Name, InStr(1, oSheet.Name, ":")- 1)
MessageBox.Show(SheetNumber, oSheet.Name)
i=1+1
Next
Is there a way to add the sheet name to the title block of drawings with a variable?
I can add the sheet number, revision and size but not the name. Why not?
I've created a custom title block. I'd like to use VB to fill in this title block using info obtained from an Excel Spreadsheet; Company Name, Location, Drawing Title, etc.
View 5 Replies View RelatedI moved the hole table from the original sheet to an other, but the fields in the title block of the new sheet don't update with the iproperties of the model
View 1 Replies View RelatedWe have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
First, it requires there to be a prompted entry text box in the title block named <SCALE>, is there any way to write to a textbox that is not prompted entry? The prompt when a new drawing or sheet is created is misleading and makes users think they need to manually fill out the prompt. Secondly, this code works on multi-sheet drawings but it concludes by making the last sheet active. Since we are triggering this rule before save it's a nuisance to have the drawing switch sheets everytime you do a save. Ideally, the current active sheet should remain active when the rule runs. Here is the
For Each oSheet In ThisApplication.ActiveDocument.Sheets
ActiveSheet=ThisDrawing.Sheet(oSheet.Name)
If oSheet.TitleBlock Is Nothing Or oSheet.DrawingViews.count=0 Then Exit Sub
oTitleBlock=oSheet.TitleBlock
oTextBoxes=oTitleBlock.Definition.Sketch.TextBoxes
[code]....
Standard sheet number option gives you only 1, 2 and so on.
I want A1 where A does not change and 1 changes depending on sheet number.
I am using Autocad 2012. I am battling to find out how to make a border and title block for my machine drawings . Do i do it in paper space or in model space.
View 9 Replies View RelatedI am very new to Autocad and I'm using LT2011 version. I am creating some basic drawings for small aluminum parts and need a border/title block to use. I assume there are already some saved as templates.
View 9 Replies View RelatedWe have decided to have a company re-brand.
This involves a New Logo and slight colour change!!!
We have booklets with up to 30 layout tabs in each one.
Is there a quick way to change the border and title block colour on all these layouts rather than have to do a quick select on each tab!!
I have 4 layouts all from the same drawing that I need desperately to print now. But for some reason only the border and Title block will print for me. What have I done to cause this? And how can I rectify it? I need to print these tonight
View 3 Replies View RelatedHow to add a new sheet with my title block. I am a little confused on this so far. I have read the autodesk 5 parts to sheet set manger and there is allot of things I'm not sure of. The title block is the first
View 9 Replies View RelatedI already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies View RelatedI'm not up to speed in configuring title blocks with sheet set manager and I've come into this situation unexpectedly.
I had to come up with a set of P&P sheets in a hurry to assist a contractor in providing a rough estimate for a sewer run, so I generated the sheets using the preconfigured imperial sheet set template. Afterwards I've switched out the border and title block generated by the template with our standard blocks. Our block attributes are old school and do not use fields. Now I am trying to upgrade those old attributes by replacing them with fields that reference the Sheet Set attributes.
Here is the problem: when inserting the field for the sheet number I can either use the CurrentSheetNumber or the SheetSetPlaceholder attribute. If I use CurrentSheetNumber, the title block shows the correct sheet number for the current sheet (the sheet I am making the edits from). However all the other sheets show that same number. In other words the fields do not show the corresponding sheet numbers from SSM. If I use SheetSetPlaceholder none of the title blocks will update to show the sheet number.
I believe I should be using the placeholder field but I can't get it to synchronize it with the SSM. Is there a way to make this work?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]
I've created a sheet template that includes Fields to populate the sheet with the Project Name and location among others like scale, etc. When I create the new sheet in the project navigator most of the fields populate with the correct information based on the parameters set in the project. However, it consistantly does not populate the Project name and location. When I click the field and ensure that the attribute is set correctly then it renders the correct information. The problem is this ends up being a manual operation yet it still reads as a smart tag. Why do these not populate automatically?
Here's my process:
Create dwt for sheet file and include xref of title block.
Create a block with attributes that link to AEC Project, CurrentSheetTitle, etc. and insert into dwt.
In project navigator I create new sheet and select my template.
Information does not populate.
But when I view the block and close (no edits) it then links.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
Is there a way to generate the station ranges for each sheet title block when generating sheets? It seems like there should be some sheet set manager variable for it or something but I haven't been able to find it.
View 8 Replies View RelatedI have a Revit project with two different types of title blocks - one for Planning Board Submissions and one for Construction Documents. Is there a way of changing the title block family for a sheet from one family to another? I cannot seem to be able to do this without deleting the sheet and re-creating it with the new title block family.
I cannot just edit the family and reload it because, like I said, I need to maintain certain information on some sheets and different information on others.
I want to pin all our sheets in the lower left corner. We are using a parametric sheet with all the sheet sizes we need built in. The title block is placed in the lower right corner. Is there a way to keep the lower left corner in place (pin) and the tiltle block moving when changing sheet size?
View 3 Replies View RelatedHow do I get my image, its a flyer to print on a full 8.5x11 media. The image size/canvas size is 8.5x11, but when I try to print it or save it as a *.pdf it always comes out with about a 1/4" white border around the margins.
View 1 Replies View RelatedI have the default border set in all my templates but I want to add an outside border to the default border (so everything is ultimately enclosed in a large box). How can I add that to the default? I see where I can define a new border but I can't have two borders on the same drawing so how do I combine them? I want to keep the existing "smart" default border that lets me choose how many zones etc.
View 9 Replies View RelatedPer the attached exhibit, how to get the plot border to cover the entire sheet border instead of just the bottom left corner.
View 1 Replies View RelatedReinstalled autocad and the printable area margins went back to default.
View 1 Replies View Relatedhave default text for a Prompted Entry in a Border. I have not found a way to do this other than creating a custom iProperty, which is not an option, since it is not our title block / border.
View 9 Replies View RelatedI have done a new Title Block in our drawing templates.
It only works in New drawings if I open an old drawing I must "Copy/paste" the new Title Block into the browser to the left But I want all our old drawings to use the new Title Block.
Is there a way to have the new Title as default on all old drawings?
