We have decided to have a company re-brand.
This involves a New Logo and slight colour change!!!
We have booklets with up to 30 layout tabs in each one.
Is there a quick way to change the border and title block colour on all these layouts rather than have to do a quick select on each tab!!
We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
I am using Autocad 2012. I am battling to find out how to make a border and title block for my machine drawings . Do i do it in paper space or in model space.
View 9 Replies View RelatedI am very new to Autocad and I'm using LT2011 version. I am creating some basic drawings for small aluminum parts and need a border/title block to use. I assume there are already some saved as templates.
View 9 Replies View RelatedI use two different measuring system IMPERIAL and METRIC.
What I want is to be able tell at a glance, by having different color border and Title-block Text is which one of the system of units I'm using
So what I'm wanting to do is create a Metric Sheet template with on color, Border, Title Block Text and a different color for the Imperial.
I've tried changing the color using the Style Center but that affects both templates, I've tried editing the title-block text saving the template but on opening it has changed back to the defaults set in the style settings and dose not hold those that I set.
What I don't what to be doing is changing them after opening, as at some stage I'll forget.
Is there a way to access any data of any Border in a Drawing files when creating a sketch in the file?
I'm trying to make a Title Block that take up the whole length of the Border bounded page and 10 mm high, anchored on the bottom.
Currently I had the Default Border "changed" by Inserting it and changing the margins to fit to approximately my printer's printable area. It seems at this stage when I created a new title block defn I'm basically given a blank sketch with the origin at the bottom left as my only "snap point".
I found one through subject suggestion about using iLogic to change the size, but that isn't exactly what I'm trying to do as that seems just a switch for different Title Blocks that's been made up.
I thought about just drawing the title block in with the border, but I don't think that's the right way to do it.
Is there any way to draw your Title block in this case beside manually figuring out how big the Border is and dimension with that raw number?
(Just curious as it would be just a simple subtraction, but if I changed the Border margin I would have to repeat the arithmetic...)
When i create a drafting i use ISO.idw template. I delete the default title block and the default border and then i create my personal title block and border. How to save the new title block and the new border somewhere in "Inventor's memory" and use them in other draftings?
View 1 Replies View RelatedI have 4 layouts all from the same drawing that I need desperately to print now. But for some reason only the border and Title block will print for me. What have I done to cause this? And how can I rectify it? I need to print these tonight
View 3 Replies View RelatedIs there a way to change the default margin offsets (i.e. the distance between the edge of your border or title block to the edge of your paper), without using the "Insert Drawing Border" option?
I would have thought you could do this through the "Edit Sheet" or "Define New Title Block / Border" options. I have multiple customized title blocks, which each require their own margin offsets.
We want to use our AutoCAD company standard templates within Inventor. I’ve followed the procedures to accomplish this under the heading:
Create a .dwg template in Autodesk Inventor from an AutoCAD .dwg template
This works without any problems. Inventor is able to recognize the size of our template border (20.75” x 33”) and correctly selects a sheet format of 24” x 36”. The template border is centered on the 24” x 36” sheet just as we would like it (see attached).
The template is used to create a new Inventor .dwg, and base views are placed and annotated. No problems, everything looks good. The new drawing is saved and Vaulted. However, at some point Inventor "shifts" the location of the template on the 24” x 36” sheet format (see attached). This action is unpredictable. The drawing might be checked-out and checked-in several times before the “shift” happens. When it does we have to re-locate the views and other text annotation to suit the new title block & border location.
How can we lock the position of the template border & title block? (Should be noted that we need to keep our template positioned such that the bottom left corner is at 0,0,0 when it is opened in AutoCAD.)
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
I am trying to change the colour of a border, there was a video [URL] but it has been taken down.
View 4 Replies View Relatedi have a title block in the layout tab which i use for all new docs. when starting a new drawing i open my old one, delete the drawings and save it with a new name - this way i always have my title block how i want it in the Layout 1 tab. this has worked for me so far. but now I need to create an A3 print out.
i have created the picture that i need in modelspace but when i click in the viewport within the layout and select the scale that I have been asked to use, the pic becomes too big for the page.
when i go into page setup i can select a3 and preview this but it just shows my a4 page in the middle of an a3 page. so how to i make the titleblock and viewport bigger (to fit a3)?
What heading do you look for in the customize menu to change the colour of the main title bar? I can't seem to find it.
View 5 Replies View RelatedIs there a way to change a title block? After finishing all the dimensioning and details I realized I used the wrong title block.
View 3 Replies View RelatedI am trying to change the title block of the active sheet using visual basic. I realize this can be done using a snippet in iLogic, but I am creating an external .dll file using Visual Studio.
I have tried...
ThisDoc.Document.ActiveSheet.TitleBlock.Definition = "Title Block Name"
ThisDoc.Document.ActiveSheet.TitleBlock.Definition.Name = "Title Block Name" (This changes the name of the title block in the browser but doesnt swap it out.)
Call ThisDoc.Document.ActiveSheet.TitleBlock.Definition("Title Block Name")
Is there any macro-command to do this :
"Open the .idw that you created your title block in. Locate and right click on your title block in "drawing resources". Select copy. Open the file that you want to put your title block in. Right click on "drawing resources" and paste your title block there. Now you will have to delete their title block and then activate yours. "
I want to change my drawing template and I have many to do and it must have somewhere somehow a way to do this automatically?
I create a thread here: and I have most of what I require, but for some reason I can't iLogic to swap my title blocks within my drawing template.
View 3 Replies View RelatedI have tried to change the size of the text in the title block and in other places within a drawing, but the changes are ignored. They always come back to Tahoma 0.120"
Is this a bug in the program?
Inventor 2013 with the latest service packs, etc.
I really need to make some changes to the title block and making the text smaller is one of them.
I am currently working with fx parameters and iLogic to drive a model and it's corresponding drawing to change based on a single user parameter.
I have managed to get the drawing to update both the scale of the views I need and the size of the sheet with the change in parameter using the following rule:
IfParameter("EB75551.ipt.Rise")<1801Then
ActiveSheet.ChangeSize("A1", MoveBorderItems :=True)
ElseIfParameter("EB75551.ipt.Rise")>1800Then
ActiveSheet.ChangeSize("A2", MoveBorderItems :=True)
EndIf
However when i attempt to use this with the title block using the function:
ActiveSheet.TitleBlock="My Title Block"
in place of the sheet change size it brings up the error message:
Error in rule: Drawing Title Block, in document: Drawing
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
I have read elsewhere that this is due to me having prompted entries for the scale and drawn by fields, however when i use the function designed for prompted entries: ActiveSheet.SetTitleBlock("Other Title Block", "promptedEntry1", "promptedEntry2")
It fills in the prompted entry fields from the code and if i change these entries in the "edit field" option they are overwritten when it is updated.
Is there a way have the prompted entries when you open the drawing fill in the "promptedEntry1" field in the rule so that I can use the rule? Or am I going about it the wrong way?
I should point out i'm new to iLogic and no-one in my workplace can use it so each person changing the "promptedEntry1" field to the scale they wish isn't a wise move.
How could I read / change prompted entry through code from title block (for example DIN) within VB.Net?
View 3 Replies View RelatedLooking for starting point to writing a routine that will open blocks in a drawing and change the colour.We receive drawings from clients with their blocks and would like to have them changed to our company colours.
So basically, i am looking for something that would within a drawing, change every block to a specific color without exploding and redefining. The colour changes will be the same throughout new drawings.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedHow to convert existing 2d autocad title block into Revit title block template?
View 7 Replies View RelatedAutocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
I've inherited the AutoCAD management at my office and I'm struggling a bit with my title border. We're in the process of moving from Mechanical 2012 to Mechanical 2014 and while setting up the new template I seem to have caused a problem with our title block - the file name no longer auto updates each time you save, where it did in 2012.
I have set the Options > AM: Preferences > System > Acad/M > Title > TitleUpdate variable to 1, but still no luck.
The file name attribute has the following info:
Tag: GEN-TITLE-DWG
Prompt: File Name
Default: (blank)
Are there any other options I need to change to get this to work in Mechanical 2014?
Edit: looks like it does update, but only when you open the file. ie. you need to save, close, then re-open the dwg. how to make it update when saving like it did in 2012?
How do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedIs there a logical way to use a Title Block and border page that I created for use on an ANSI size A page to create an ANSI B, C, D? Scaling seems to work in one direction (x or y) but not both. Stretching doesn't solve my text in the Title Block from appearing too small when I create a D size.
View 4 Replies View RelatedIf I'm in the layout view, I want to add a Title Border.All of my layout previews are default in Landscape.When I use the Title Border (via the ribbon) and go thru the options, it seems that my only choice is a A4 PORTRAIT border with title block.
Now my preference is to use a landscape orientation, but I can't get it to work yet.
Is it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View Related