Revit :: How To Convert Existing 2D Autocad Title Block Into Block Template
Jul 24, 2008How to convert existing 2d autocad title block into Revit title block template?
View 7 Replies
ADVERTISEMENT
AutoCAD Map 3D :: Using Existing Company Title Block Incorporated Into Map Book Template?
Jul 21, 2011I have made a template for my mapbooks and I got the main viewport, key viewport and adjacent map arrows to work great, but the title block is proving more difficult. I have tried it many ways, in a seperate drawing in model space which did not work, in the template as a block in a layout which came in, but did not allow me to edit any foelds unless exploded, etc, etc...
How to use an existing company title block incorporated into the map book template?
AutoCAD 2010 :: Convert Block Back To Title Block Or Border
Feb 15, 2012We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
AutoCad :: Convert Existing Block To Leader That Uses Same Block
Oct 21, 2013I was wondering if it would be possible to convert an existing block to a leader that uses the same block with the arrow attached without losing the information which is stored inside the block attributes.
I have created the multi leader with the block definition attached but I'm still struggling to incorporate the data into it.
There are to many blocks to do this manually. I have exported the data to a excel but do not know how to insert it back into to multi leader.
AutoCad :: Title Block Template Drawing
Apr 5, 2011I created a standard title block template drawing for my student classwork exercises, and when I constructed the title block I keyed in real dimensions to ensure the title block would completely print on a piece of 8.5 X 11 paper. Now whenever I attempt to draw a large scale drawing (say a 36" dia circle, it draws the circle well outside my title block. I know why this is happening, I just need some tips about how to allow a title block template to be constructed around my current drawing reguardless of the drawing scale.
View 5 Replies View RelatedAutoCad :: Template For Border And Title Block
Jan 31, 2012I am very new to Autocad and I'm using LT2011 version. I am creating some basic drawings for small aluminum parts and need a border/title block to use. I assume there are already some saved as templates.
View 9 Replies View RelatedAutoCAD 2010 :: Sheet Title Block Template
Apr 23, 2012I already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies View RelatedAutoCAD 2013 :: Template Creation (Title Block)
Dec 18, 2012Is it possible to create a title block in AutoCAD 2013 and have the option to select from a drop down list a Name and Address to place in a certain area of the title block?
View 2 Replies View RelatedAutoCad :: Title Block Template For E Size Drawing
Mar 1, 2013find a template with a title block that i can insert my information. I already have my project completed on a 24x36 sheet and would just like to copy it over.
View 3 Replies View RelatedAutoCad :: Transporting Title Block Template Into Layout
Apr 16, 2013I have previously drawn my title block in Model space but i now know the correct way is to draw it in the layout.
Is there anyway of transporting the title block template into the layout and then saving that as a template for my future drawings?
Or do I need to go back to the beginning and draw the title block again from scratch in the layout and then save that drawing as a template for future use?
AutoCAD LT :: Title Block Of Layout Template - Font Size
Feb 26, 2013In the title block of a my layout template I have tables inserted for revisions, drawing type, numbering etc. I have type already inserted in those blocks that I typically click on and then type in what I need it to say. My template works on all my other drawings except a particular one that I am currently working on.
When I click on the type, it automatically increases from 3/16" to 8" and enlarges the box to accommodate the new font size.
I've attached a screen. The top is before I click on the word "type" in the lower right corner and the bottom one is afterward.
AutoCAD Inventor :: Edit Title Block Template Error?
Nov 21, 2012I just recently received error from one of our customers regarding this kind of error (see attachment).
They are trying to reuse their own customized template to other PCs, they are copying these files to the template folder of Inventor. This method is successfully done in all of their pcs except for the two.
AutoCAD Architecture :: Setup Own Template Drawing With Title Block / Layers
Apr 2, 2012I was presented with a little renovation project and need to setup my own drawing. I've worked on CAD for a number of years while at a structural firm, an engineering firm and took classes in school but one thing I never had to do was setup was my own professional drawing from scratch. I know enough that it's crucial I start off on the foot. The engineering firm I worked at had everything ready so whenever I used CAD it was in an existing drawing or preparing a detail which the drafters imported. When I did some drafting work for an architect, he also had the drawing setup for me.
Since I'm now on my own I need to setup my own template drawing with a title block, layers, etc. Whats the best route for setting up my own sheets?
At my firm we always worked in a 1:1 scale & engineering units but since I'm doing floor plans for renovation work I plan on using the industry standard.
AutoCAD Inventor :: Shifting Location Of Template Border And Title Block
Jun 26, 2012We want to use our AutoCAD company standard templates within Inventor. I’ve followed the procedures to accomplish this under the heading:
Create a .dwg template in Autodesk Inventor from an AutoCAD .dwg template
This works without any problems. Inventor is able to recognize the size of our template border (20.75” x 33”) and correctly selects a sheet format of 24” x 36”. The template border is centered on the 24” x 36” sheet just as we would like it (see attached).
The template is used to create a new Inventor .dwg, and base views are placed and annotated. No problems, everything looks good. The new drawing is saved and Vaulted. However, at some point Inventor "shifts" the location of the template on the 24” x 36” sheet format (see attached). This action is unpredictable. The drawing might be checked-out and checked-in several times before the “shift” happens. When it does we have to re-locate the views and other text annotation to suit the new title block & border location.
How can we lock the position of the template border & title block? (Should be noted that we need to keep our template positioned such that the bottom left corner is at 0,0,0 when it is opened in AutoCAD.)
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
AutoCAD Architecture :: Project Fields In Title Block Sheet Template
Jun 26, 2012I've created a sheet template that includes Fields to populate the sheet with the Project Name and location among others like scale, etc. When I create the new sheet in the project navigator most of the fields populate with the correct information based on the parameters set in the project. However, it consistantly does not populate the Project name and location. When I click the field and ensure that the attribute is set correctly then it renders the correct information. The problem is this ends up being a manual operation yet it still reads as a smart tag. Why do these not populate automatically?
Here's my process:
Create dwt for sheet file and include xref of title block.
Create a block with attributes that link to AEC Project, CurrentSheetTitle, etc. and insert into dwt.
In project navigator I create new sheet and select my template.
Information does not populate.
But when I view the block and close (no edits) it then links.
AutoCAD Inventor :: VBA Replace Title Block Definitions In Drawing From Template File
May 7, 2013I have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
AutoCAD 2010 :: Create Single Layout With Title Block And Viewport To Save As Template For Future
Oct 28, 2013I am trying to create a single layout with title blockandviewport to save as a template for future. Right clicking on the layout tab does not produce the menu.
I create a new layout by selecting page set up manager in the file menu, create a new layout, but the tab does not show up at the bottom.
AutoCad :: Attribute In Title Block Exists In Block Editor But Not In Project
Sep 6, 2012Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
AutoCad :: Inserting Title Block - Design In Middle Of Block?
Jul 30, 2013How do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedRevit :: Title Block Will Not Print
Jul 14, 2011Used to plot, but now it doesn't. The VG title block is checked.
View 1 Replies View RelatedAutoCad :: Create Block To Insert On Title Block
Oct 26, 2012Is it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
AutoCad :: Editing Title Block Using Block Editor
Aug 31, 2011I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedAutoCad :: Add Some Attributes To Existing Block Using Block Editor
Dec 12, 2013I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
Revit :: Create New Labels For Title Block
Sep 16, 2011I am creating a title block in Revit Architecture 2012. I am trying to create new labels for my title block and cannot seem to get it to work. I created a shared parameter and added the parameters I wanted to add to my title block. I chose the "common" discipline and the type of parameter as "text". I added these parameters to the label parameters I wanted to insert into the title block. When I do so they show up in the edit family, but when I load them into my project they don't show up.
View 3 Replies View RelatedRevit :: Get A Filename Label In The Title Block?
Apr 19, 2012Is there a way to get a filename label in the title block??
At the moment filepath label is used, but this path is too long for the small space we have.
I have only found 2 posts on this subject, but both are more than 5 years old.
Revit :: Showing The File Name On The Title Block?
Apr 2, 2013Showing the “file name” on the title block,
I’m not sure if there is workaround to show the file name only WITHOUT the path. This option is avaible in the AutoCAD. have a look on the attached screenshots
AutoCAD .NET :: Getting Block Attributes From Title Block
Sep 19, 2011I'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
Revit :: How To Create No / Yes / Visibility Parameter For Title Block
Jun 27, 2012How to create a 'No/Yes' or visibility parameter for a title block? I have my Architectural Seal as an image inserted into my title block family. I want to have that as a parameter for visibility so I can have it turned off until I am ready to print for final building department submission filing.
If possible, this would be a global adjustment so I would operate this parameter once and will affect all the sheets in the project instead of having two title block families and swapping those out at the time of filing.
Revit :: Changing Title Block For A Sheet From One Family To Another?
Mar 13, 2012I have a Revit project with two different types of title blocks - one for Planning Board Submissions and one for Construction Documents. Is there a way of changing the title block family for a sheet from one family to another? I cannot seem to be able to do this without deleting the sheet and re-creating it with the new title block family.
I cannot just edit the family and reload it because, like I said, I need to maintain certain information on some sheets and different information on others.
Revit :: Locking / Pinning Title Block And Sheet
Aug 29, 2012I want to pin all our sheets in the lower left corner. We are using a parametric sheet with all the sheet sizes we need built in. The title block is placed in the lower right corner. Is there a way to keep the lower left corner in place (pin) and the tiltle block moving when changing sheet size?
View 3 Replies View RelatedRevit :: Title Block - Crop View For Insertions Of CAD
May 25, 2012My company works the location map of the houses that built in AutoCAD, I need that map in my titble block in Revit, so I insert the CAD in the family of my title block, but is static, i can't move it, i need something like CropView that gave me the oportunity to hide part of the CAD.
I make the exercise inserting the CAD in a ceiling plan view of the project to have the flexibility of hide part of the map (Crop view), but only work if I inserted in one sheet not all that i have.
