I have previously drawn my title block in Model space but i now know the correct way is to draw it in the layout.
Is there anyway of transporting the title block template into the layout and then saving that as a template for my future drawings?
Or do I need to go back to the beginning and draw the title block again from scratch in the layout and then save that drawing as a template for future use?
In the title block of a my layout template I have tables inserted for revisions, drawing type, numbering etc. I have type already inserted in those blocks that I typically click on and then type in what I need it to say. My template works on all my other drawings except a particular one that I am currently working on.
When I click on the type, it automatically increases from 3/16" to 8" and enlarges the box to accommodate the new font size.
I've attached a screen. The top is before I click on the word "type" in the lower right corner and the bottom one is afterward.
I am trying to create a single layout with title blockandviewport to save as a template for future. Right clicking on the layout tab does not produce the menu.
I create a new layout by selecting page set up manager in the file menu, create a new layout, but the tab does not show up at the bottom.
How to convert existing 2d autocad title block into Revit title block template?
View 7 Replies View RelatedI created a standard title block template drawing for my student classwork exercises, and when I constructed the title block I keyed in real dimensions to ensure the title block would completely print on a piece of 8.5 X 11 paper. Now whenever I attempt to draw a large scale drawing (say a 36" dia circle, it draws the circle well outside my title block. I know why this is happening, I just need some tips about how to allow a title block template to be constructed around my current drawing reguardless of the drawing scale.
View 5 Replies View RelatedI am very new to Autocad and I'm using LT2011 version. I am creating some basic drawings for small aluminum parts and need a border/title block to use. I assume there are already some saved as templates.
View 9 Replies View RelatedI have a drawing template that I frequently use and am trying to get the title block appear in every layout. Is this possible? It is only displayed on my first layout.
View 4 Replies View RelatedI already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies View RelatedIs it possible to create a title block in AutoCAD 2013 and have the option to select from a drop down list a Name and Address to place in a certain area of the title block?
View 2 Replies View Relatedfind a template with a title block that i can insert my information. I already have my project completed on a 24x36 sheet and would just like to copy it over.
View 3 Replies View RelatedThe most efficient way of inserting a title block (the border around a drawing with text etc) into a layout? Sometimes when I insert a title block it seems like the title block is too big or too small for the layout .
View 9 Replies View RelatedI just recently received error from one of our customers regarding this kind of error (see attachment).
They are trying to reuse their own customized template to other PCs, they are copying these files to the template folder of Inventor. This method is successfully done in all of their pcs except for the two.
I was presented with a little renovation project and need to setup my own drawing. I've worked on CAD for a number of years while at a structural firm, an engineering firm and took classes in school but one thing I never had to do was setup was my own professional drawing from scratch. I know enough that it's crucial I start off on the foot. The engineering firm I worked at had everything ready so whenever I used CAD it was in an existing drawing or preparing a detail which the drafters imported. When I did some drafting work for an architect, he also had the drawing setup for me.
Since I'm now on my own I need to setup my own template drawing with a title block, layers, etc. Whats the best route for setting up my own sheets?
At my firm we always worked in a 1:1 scale & engineering units but since I'm doing floor plans for renovation work I plan on using the industry standard.
We want to use our AutoCAD company standard templates within Inventor. I’ve followed the procedures to accomplish this under the heading:
Create a .dwg template in Autodesk Inventor from an AutoCAD .dwg template
This works without any problems. Inventor is able to recognize the size of our template border (20.75” x 33”) and correctly selects a sheet format of 24” x 36”. The template border is centered on the 24” x 36” sheet just as we would like it (see attached).
The template is used to create a new Inventor .dwg, and base views are placed and annotated. No problems, everything looks good. The new drawing is saved and Vaulted. However, at some point Inventor "shifts" the location of the template on the 24” x 36” sheet format (see attached). This action is unpredictable. The drawing might be checked-out and checked-in several times before the “shift” happens. When it does we have to re-locate the views and other text annotation to suit the new title block & border location.
How can we lock the position of the template border & title block? (Should be noted that we need to keep our template positioned such that the bottom left corner is at 0,0,0 when it is opened in AutoCAD.)
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
I have made a template for my mapbooks and I got the main viewport, key viewport and adjacent map arrows to work great, but the title block is proving more difficult. I have tried it many ways, in a seperate drawing in model space which did not work, in the template as a block in a layout which came in, but did not allow me to edit any foelds unless exploded, etc, etc...
How to use an existing company title block incorporated into the map book template?
I've created a sheet template that includes Fields to populate the sheet with the Project Name and location among others like scale, etc. When I create the new sheet in the project navigator most of the fields populate with the correct information based on the parameters set in the project. However, it consistantly does not populate the Project name and location. When I click the field and ensure that the attribute is set correctly then it renders the correct information. The problem is this ends up being a manual operation yet it still reads as a smart tag. Why do these not populate automatically?
Here's my process:
Create dwt for sheet file and include xref of title block.
Create a block with attributes that link to AEC Project, CurrentSheetTitle, etc. and insert into dwt.
In project navigator I create new sheet and select my template.
Information does not populate.
But when I view the block and close (no edits) it then links.
I am setting the Custom Properties on a CAD File. The Properties may include "Drawing Number, DrawingName, ProjectName"...
Now using code I want to fetch values of these Properties and set into Layout Title Block.
I created a Title Block in Model Space with a Scale of 1:100. When I copy it with Base point and paste it in Layout Paper space it do not fit with the default paper space. What will I do?
View 3 Replies View RelatedIs there any command to fit or re-size a title block to A drawing in the layout?
View 4 Replies View RelatedI have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
I created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
View 6 Replies View RelatedMany times when I receive a drawing from an architect, when I go into the layout tab the titleblock info/XREF doesn't line up with the page layout. I would assume it lined up when the architect sent it to me in his software. For years the solution I use is to XREF the architects PDF in the layout and then go to print and change the Print Offset till it looked right in the print preview. Then I would apply it to the layout. I would then take the offsets and apply it to every sheet. This is a very time consuming process and was wondering if there is a better way to make this work and still keep the scales. I was also wondering if there was a way to move and align the layout on the fly in the paperspace.
View 3 Replies View RelatedRight now i am using model space only i didn't use the layout but i want create the A3 layout. And I need to attach our customized title block into the layout, how to make it the A3 lay out size and how to attach the title block into layout ?
View 2 Replies View RelatedI would like to ask if its possible to extract part of the drawing from modelspace then add title block in lay-out and scale the extracted drawing...how will i do that?
View 9 Replies View RelatedI need a routine that will duplicate the current sheet's Layout tab and content to the next tab, set it current, delete the titleblock (by name) on the new tab and reference in a differently named titleblock, 1:1, 0,0 onto the new Layout tab. I'll be running this in a batch script.
View 9 Replies View RelatedI would like to place a parameter in the title block to indicate the view in the plan layout.
View 1 Replies View RelatedThe title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedWe have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
How do you insert title block, so your design is in the middle of block?
View 9 Replies View Related