Revit :: Place Parameter In Title Block To Indicate View In Plan Layout?
Jan 3, 2012I would like to place a parameter in the title block to indicate the view in the plan layout.
View 1 Replies
ADVERTISEMENT
Revit :: How To Create No / Yes / Visibility Parameter For Title Block
Jun 27, 2012How to create a 'No/Yes' or visibility parameter for a title block? I have my Architectural Seal as an image inserted into my title block family. I want to have that as a parameter for visibility so I can have it turned off until I am ready to print for final building department submission filing.
If possible, this would be a global adjustment so I would operate this parameter once and will affect all the sheets in the project instead of having two title block families and swapping those out at the time of filing.
Revit :: Title Block - Crop View For Insertions Of CAD
May 25, 2012My company works the location map of the houses that built in AutoCAD, I need that map in my titble block in Revit, so I insert the CAD in the family of my title block, but is static, i can't move it, i need something like CropView that gave me the oportunity to hide part of the CAD.
I make the exercise inserting the CAD in a ceiling plan view of the project to have the flexibility of hide part of the map (Crop view), but only work if I inserted in one sheet not all that i have.
Revit :: Structural Column Visibility - Representation In Plan View Not Cover Block Hatch Of Wall
Aug 8, 2013I am doing a five stories building and when ad the structural column with concrete cast in place material, the representation in plan view does not cover the block hatch of the wall. See attached image. I have read all about structural columns and did not find any solution.
View 5 Replies View RelatedRevit :: Reflecting Ceiling Plan In Plan View?
May 30, 2012I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies View RelatedAutoCAD Inventor :: Get Parameter Into Title Block?
Apr 10, 2013I've created the user parameters and they get the information I need by the rules in illogic and also added as custom properties, but when I try to put them on the title block they don't retrieve the information.
View 9 Replies View RelatedAutoCAD Inventor :: Get Parameter Into Title Block (CF)
Apr 10, 2013I've created the user parameters and they get the information I need by the rules in illogic and also added as custom properties, but when I try to put them on the title block they don't retrieve the information.
View 1 Replies View RelatedRevit :: New Parameter Of Label Text In Title Blocks
May 23, 2012I need to create a new parameter in label text, (example: adress number 2), so I did it, but when I load it into the project, i cant write anything, its just a question mark.
View 2 Replies View RelatedRevit :: Place AutoCad 3D Drawing Of Appliance Into Floor Plan
Jul 21, 2011I am relatively new to Revit. How I can place an Autocad drawing into Revit. Specifically I want to place a manufacturers AutoCad 3D drawing of an appliance (refridgerator) into my Revit floor plan.
View 2 Replies View RelatedRevit :: Plan View Tags Referencing Wrong Dependent View?
Jan 10, 2012We have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets. Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list. If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically. I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order.
View 4 Replies View RelatedAutoCad 2D :: How To Get Title Block Appear In Every Layout
Aug 16, 2011I have a drawing template that I frequently use and am trying to get the title block appear in every layout. Is this possible? It is only displayed on my first layout.
View 4 Replies View RelatedAutoCAD Inventor :: Place Different Information In Title Block On Each Drawing?
Apr 13, 2012I was curious, when creating multi sheet drawings, how can I place different information in the title block on each drawing?
Example, 2 pages, Description on page 1 = PAGE 1 DESC, by default this same description will show up on all subsequent pages. How do I get page 2 description to be different?
Inventor 2014 PDS
AutoCAD 2013 :: Setup Title-block For Everyone At New Place Of Business
Feb 11, 2013I'm trying to setup a title-block for everyone at my new place of business.
In this new job, 98% of our drawings are done in a single file with multiple layouts. I would like to set my template up so that things like Rev numbers and drawn by, and checked by etc., are updated in all layouts by changing just the first sheet. I also want to include a field for the drawn date so that it takes the current date (they want the drawn date to reflect the print date rather than the actual drawn date...)
I would like to incorporate attributes for things like checked by, engineer check, and such but make them so they don't appear unless you open the attribute editor.
AutoCad :: Inserting A Title Block Into Layout
Mar 10, 2012The most efficient way of inserting a title block (the border around a drawing with text etc) into a layout? Sometimes when I insert a title block it seems like the title block is too big or too small for the layout .
View 9 Replies View RelatedAutoCAD .NET :: Set File Property To Layout Title Block Using C#
May 30, 2012I am setting the Custom Properties on a CAD File. The Properties may include "Drawing Number, DrawingName, ProjectName"...
Now using code I want to fetch values of these Properties and set into Layout Title Block.
AutoCad :: Title Block Do Not Fit To Layout Paper Space
Jul 3, 2011I created a Title Block in Model Space with a Scale of 1:100. When I copy it with Base point and paste it in Layout Paper space it do not fit with the default paper space. What will I do?
View 3 Replies View RelatedAutoCad :: Command To Fit Title Block To A Drawing In Layout?
Nov 30, 2013Is there any command to fit or re-size a title block to A drawing in the layout?
View 4 Replies View RelatedAutoCad :: Transporting Title Block Template Into Layout
Apr 16, 2013I have previously drawn my title block in Model space but i now know the correct way is to draw it in the layout.
Is there anyway of transporting the title block template into the layout and then saving that as a template for my future drawings?
Or do I need to go back to the beginning and draw the title block again from scratch in the layout and then save that drawing as a template for future use?
Revit :: How To Convert Existing 2D Autocad Title Block Into Block Template
Jul 24, 2008How to convert existing 2d autocad title block into Revit title block template?
View 7 Replies View RelatedAutoCAD LT :: Title Block Of Layout Template - Font Size
Feb 26, 2013In the title block of a my layout template I have tables inserted for revisions, drawing type, numbering etc. I have type already inserted in those blocks that I typically click on and then type in what I need it to say. My template works on all my other drawings except a particular one that I am currently working on.
When I click on the type, it automatically increases from 3/16" to 8" and enlarges the box to accommodate the new font size.
I've attached a screen. The top is before I click on the word "type" in the lower right corner and the bottom one is afterward.
AutoCAD 2013 :: Get 3D Assembly Drawing Into Title Block On Layout Tab?
Jul 17, 2013I created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
View 6 Replies View RelatedAutoCAD Print / Plot :: Aligning Title Block In Layout Tab?
Jan 6, 2014Many times when I receive a drawing from an architect, when I go into the layout tab the titleblock info/XREF doesn't line up with the page layout. I would assume it lined up when the architect sent it to me in his software. For years the solution I use is to XREF the architects PDF in the layout and then go to print and change the Print Offset till it looked right in the print preview. Then I would apply it to the layout. I would then take the offsets and apply it to every sheet. This is a very time consuming process and was wondering if there is a better way to make this work and still keep the scales. I was also wondering if there was a way to move and align the layout on the fly in the paperspace.
View 3 Replies View RelatedAutoCAD 2010 :: Creating Layout Size (A3) And Attach Title Block
Jul 2, 2012Right now i am using model space only i didn't use the layout but i want create the A3 layout. And I need to attach our customized title block into the layout, how to make it the A3 lay out size and how to attach the title block into layout ?
View 2 Replies View RelatedRevit :: How To Add Structural Plan View
Dec 23, 2013I was following a tutorial when he created a structural plan where he'd place his footings. when i tried it on my Revit Architecture 2014, i found out that i didn't have that feature. is there any way i can turn it on?
i'm not sure if he's using revit architecture because he just refers to it as Revit 2014. i made a floor plan below the 0 mark but things will be tidier if i could make structural plan views.
AutoCad :: Add Title Block In Layout / Scale The Extract Part Of Drawing From Modelspace
Aug 9, 2013I would like to ask if its possible to extract part of the drawing from modelspace then add title block in lay-out and scale the extracted drawing...how will i do that?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Copying Layout Tab And Xref New Title Block
Apr 30, 2013I need a routine that will duplicate the current sheet's Layout tab and content to the next tab, set it current, delete the titleblock (by name) on the new tab and reference in a differently named titleblock, 1:1, 0,0 onto the new Layout tab. I'll be running this in a batch script.
View 9 Replies View RelatedRevit :: View Title Is Gone Can't Select View
Apr 29, 2013I have a sheet with views on it. For some reason I can't select one of the views. I can't activate it. And the view title is gone. I can go to the browser and find it under the sheet and then go to open.
View 1 Replies View RelatedRevit :: Visibility Of Beam In Plan View?
Jul 15, 2011If i draw a beam in plan view en define the height, the beam disepare. Is there a posibility that the beam is in place and you can see a dash dot line and two dashed lines in plan view?
View 1 Replies View RelatedRevit :: Coloured Plan View By Rooms?
Mar 6, 2013Currently I have created Rooms and a Legend such that I have a coloured Plan View by Room department.
The colour boundaries extend to the centre line of the defining Walls. Is there a way to get the coloured zones to follow the Room boundaries?
I realise I can overwrite the Wall pattern and use a Solid pattern to hide the colour - but this is not what I want ...
Revit :: Possible To Show Symbols In A Plan View
Jan 17, 2013I'm currently looking into switching from Vectorworks to Revit due to a job application I'm being offered. What I really want to know is if the following floor plan is possible to make in Revit. I just want floor plans to be with color to better show the different things on it and make them more clear.
I also want to know if it is possible to show symbols in a plan view other than just a rendered hidden line view of the 3D part of it, so I can have a simplified version for the plan view and a detailed object for the 3D. Like you have a 2D-plan component for the plan views and e 3D component for all other views.
Revit :: View Specific Parameter For Cut Plane
Feb 23, 2014when I insert a window family the cut plane Revit uses is that of the family rather than that of the view. This causes a lot of problems for us when we need to cut the same window at different levels in different views and the window itself should look different. The window itself is built to look differnet at 3 ranges of cut plane height. However, if I try to control this throught yes/no visibility parameter it affects all views. I fail to make it view specific. Is there any way to make an instance parameter or view specific parameter for the cut plane/ visibility of parts in the window family. It is such a basic need for architects and I fail to understand its absence in the Revit. Generaly speaking one should be able to control what you see in each plan section view. It's an essential thing in architectural drawing.
View 9 Replies View Related
