I am doing a five stories building and when ad the structural column with concrete cast in place material, the representation in plan view does not cover the block hatch of the wall. See attached image. I have read all about structural columns and did not find any solution.
View 5 RepliesI was following a tutorial when he created a structural plan where he'd place his footings. when i tried it on my Revit Architecture 2014, i found out that i didn't have that feature. is there any way i can turn it on?
i'm not sure if he's using revit architecture because he just refers to it as Revit 2014. i made a floor plan below the 0 mark but things will be tidier if i could make structural plan views.
I'm having problems seeing the walls I drew at the foundation level in this project. The walls should be shown but I can't get to see them except in a 3d view. Also, when i intended to draw them, I think I should have done it from the foundation level plan but I could not set the plan view to see the above objects in order to draw from them. I drew it from another level and then I modified their base and top constraints afterwards..
I tried to modify the view range of the foundation level without success.
If i draw a beam in plan view en define the height, the beam disepare. Is there a posibility that the beam is in place and you can see a dash dot line and two dashed lines in plan view?
View 1 Replies View RelatedI need to create a wall the has a profile (in plan view).
View 1 Replies View RelatedHow do you make a wall that's not rectanglar (in plan view)?
See attached image.
The brown color at the end of the wall indicates the polygonal shape which should be part of the wall.
How do I turn on/off wall elements in my plan view? I'd like just the core structure to show for dimensioning purposes and turn off the sheathing etc.
View 6 Replies View RelatedIn floor plan view how do I make a wall have a concrete texture inside instead of the default (criss cross)?
View 9 Replies View RelatedIs it possible to get the wall fill pattern to show up in plan view but not in a specific section view? I tried the detail levels, Course, medium, fine, and of course the hatch pattern doesn't show up in course, but then the wall components don't show up either.
I am in a section view where i want to show a repeated cmu detail component up the wall as part of a detail, but then the hatch pattern is displayed behind it. I don't want to remove the hatch pattern entirely because I still want it to be displayed in the plan view.
I am having trouble creating my own column and beam
structural column schedule
structural framing schedule
i do not know the settings to be ticked for me to create the schedules and make them appear after i create new scheduling...
also i want to know how the graphical column and beam works...
then setting the level in the schedule to make them reflect instead of using the comments section...
Attach here is a screenshot of the levels...
I am doing the structural frame of a house with curved walls and I needed to use the Model in Place command to create a curve shaped column. I defined it's category as Structural Column, but it takes the fill pattern of the wall. When I isolate the column, it has the same fill pattern as the column from the library. I need that the column will be displayed as the other structural column.
View 1 Replies View RelatedI'd like to change the line thickness of these structural columns, but changing the view graphics doesn't override.
View 3 Replies View RelatedIn my 3D View my walls disappear when I de-select the structural box. Although drawn as regular walls they are store front panels so carry no load other than their own weight. My Visibility Graphics dialog box seems to have limited options for this. Am I missing something? How do I get them to re-appear in my 3D View for rendering without switching them to a structural wall?
View 2 Replies View RelatedI would like to place a parameter in the title block to indicate the view in the plan layout.
View 1 Replies View Relatedwhy I can not see real representation of what is modeled. Why stairs by components uses 2d lines to represent stair in plans?
View 6 Replies View RelatedWe are using structural steel framing familiies which are sloping in section. Where the view range cuts, the framing does not and the entire member is visible including above the cut plane.
The members are set to cut in plan in "Visiilbity Settings." The view is set to "Fine."
I've created an area plan of my existing building and coloured the areas using a Legend based on the area name.
I now want to do the same on the 'Proposed' Area plan, showing the new areas in the general plan ignoring the existing walls, but when I colour the areas the walls show through the solid colours, is there any way I can get the areas to cover up the walls on this plan - something line draw order.
I know you can select the area, and change the Colour Scheme Location to foreground or background - but the walls always show through...
The bread shaped object is a structural concrete column with two corners rounded.
Why can I see the new wall's lines ghosted through a structural column?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
Created a family with category 'column' in order to make in room bounding.
This family is basicly some extrusions. nothing fancy about that. However when placed in my model these extusions merge with the wall and inherit their properties which I don't want.
What I am trying to do is to model a roof using Revit Lt so that the roof tiling and battens carry on over the gable wall. Is it possible to add a void profile to the roof slab in order to achieve this or do I need to model a small section of roof to just cover the wall portion?
View 3 Replies View RelatedI am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies View RelatedI have a finished floor plan with 5.5" thick walls, but now i want to make all my walls thicker without changing the size of my rooms. What i can do to achieve this. I tried locking the wall dimensions before changing their thickness but it still shrunk my room sizes.
View 4 Replies View RelatedI placed walls at 12'0" elevation as they wereconflicting with walls below (overlap). I can't see them in plan view - In 3D iso view they are visible.
View 4 Replies View RelatedI have a Revit model of rework to an existing building. I am working from Revit Architecture 2011. When I export this model to AutoCAD, I am getting inconsistancies of my new work walls. Some of my new walls are coming in ACAD with solid hatch, others have no hatch at all. At this point I do not care if all my new walls have any hatch or not, as long as the heavier lineweights come through to make them different from existing walls and that they are all consistant. I've been searching on this for a few days now and have come up with nothing.
View 3 Replies View RelatedWe have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets. Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list. If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically. I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order.
View 4 Replies View RelatedACA 2011. I would like to copy the "standard" wall style add a surface hatch and display that in an elevation (exterior) view. I have played around with this and due to many different places to edit the materials.
I have the elevations created. When I go back into the construct and edit the wall style do I have to re-create the elevations to see the hatch? Or I think I just have something set incorrectly in the style.
How do I get to the settings that control what does and does not show in any given discipline - we need to update the Structural Discipline to show the non-structural walls, and non-structural portions of other walls as halftone.
View 2 Replies View RelatedIs there a way to set the visibility of elements in a 3D view according to the Level they are associated with?
The VG tab which opens the filter dialog provides a check box for the "Levels" category, and the relevant parameters are made available.
But I can not seem to create a filter rule which evaluates any of those parameters (name, elevation, etc...) to then isolate the visibility of those elements in the 3D view that either meet, or do not meet the criteria. Nothing seems to work.
To achieve a "similar" effect in a 3D view, I can use a Section Box, but that is a very clunky and imprecise way.I can also create a Shared Parameter for "Level" and perhaps filter successfully that way, but that seems redundant with the Levels intelligence already established.
Currently I have created Rooms and a Legend such that I have a coloured Plan View by Room department.
The colour boundaries extend to the centre line of the defining Walls. Is there a way to get the coloured zones to follow the Room boundaries?
I realise I can overwrite the Wall pattern and use a Solid pattern to hide the colour - but this is not what I want ...
I'm currently looking into switching from Vectorworks to Revit due to a job application I'm being offered. What I really want to know is if the following floor plan is possible to make in Revit. I just want floor plans to be with color to better show the different things on it and make them more clear.
I also want to know if it is possible to show symbols in a plan view other than just a rendered hidden line view of the 3D part of it, so I can have a simplified version for the plan view and a detailed object for the 3D. Like you have a 2D-plan component for the plan views and e 3D component for all other views.
How do I raise the cut plane in the floor plan view. I have windows that are not showing up in the floor plan because the sill is above the cut plane.
View 1 Replies View Related