Revit :: Wall Drawn At Foundation Level - Plan Visibility
Dec 4, 2012
I'm having problems seeing the walls I drew at the foundation level in this project. The walls should be shown but I can't get to see them except in a 3d view. Also, when i intended to draw them, I think I should have done it from the foundation level plan but I could not set the plan view to see the above objects in order to draw from them. I drew it from another level and then I modified their base and top constraints afterwards..
I tried to modify the view range of the foundation level without success.
View 6 Replies
ADVERTISEMENT
Aug 8, 2013
I am doing a five stories building and when ad the structural column with concrete cast in place material, the representation in plan view does not cover the block hatch of the wall. See attached image. I have read all about structural columns and did not find any solution.
View 5 Replies
View Related
Aug 23, 2011
I am already using autocad and Covadis (because I'm road-design, etc. ...-); I'm new building and I use Revit Architecture 2011
Already I do not understand why my isolated foundations are not visible in plan view when the footings are beautiful and well visible in the plan view,...
View 1 Replies
View Related
Jan 27, 2012
See the attached PDF file.
I can't move down the wall foundation. (The highlighted piece.) What's the reason of it? The properties of the wall foundation doesn't have the offset feature.
View 2 Replies
View Related
Feb 26, 2011
I am having trouble placing a wall foundation under a curtain wall in my project. Revit says that a foundation has been added but it is not visible in any view. I've tried editing the visiblity properties but that didn't fix the probelm.
View 3 Replies
View Related
Aug 12, 2008
I would like to create a family component using the wall foundation bearing footing as a template. I cannot find the file where the templates are located. I tried using the structural footing template but it would not give me the same flexibility the wall foundation bearing footing template does.
View 2 Replies
View Related
Mar 9, 2012
Is there a way to set the visibility of elements in a 3D view according to the Level they are associated with?
The VG tab which opens the filter dialog provides a check box for the "Levels" category, and the relevant parameters are made available.
But I can not seem to create a filter rule which evaluates any of those parameters (name, elevation, etc...) to then isolate the visibility of those elements in the 3D view that either meet, or do not meet the criteria. Nothing seems to work.
To achieve a "similar" effect in a 3D view, I can use a Section Box, but that is a very clunky and imprecise way.I can also create a Shared Parameter for "Level" and perhaps filter successfully that way, but that seems redundant with the Levels intelligence already established.
View 7 Replies
View Related
Sep 23, 2013
My template don't have Floor Plan and Level.
View 1 Replies
View Related
Oct 30, 2012
Is there a way to change the level that a floor plan view is associated to?
View 4 Replies
View Related
Jan 19, 2012
I am using Revit Architecture 2012 and I am having some issues with plan regions. I am not able to get my stairs to show up sometimes and I cannot figure out why. I have attached 2 images of my drawing to show the issue. The 2 floors in this image are a basement and lower level. I am on the basement level and the plan region cut plane is set to lower level and it is cut @ 4'. The top is lower level @ 7'-6" and the bottom and view depth are on basement @0'-0". If I turn the underlay on to show the lower level the stairs show up.
View 9 Replies
View Related
Jul 15, 2011
If i draw a beam in plan view en define the height, the beam disepare. Is there a posibility that the beam is in place and you can see a dash dot line and two dashed lines in plan view?
View 1 Replies
View Related
Nov 3, 2013
I have trouble showing Underlay for level view when dealing with in-place walls. Basically, they dont work with Underlays - nothing shows up (even in wireframe mode).
Please have a look at attached file, dropbox link: [URL] ....
There is a Blend wall that starts on Ground level and goes as high as Top level. When you check whats visible on different levels (and RCPs) everything is fine (views respond to changing cut level and so on) - but when you try to Underlay one of the level views - nothing shows up. Basic idea is to show top edge for tracing with Linework tool - so it shows as Overhead.
View 9 Replies
View Related
Aug 6, 2012
I am working on a project with Split Levels like a Multi-level CarPark. I need to produce plans by combining two Levels which are at 3M height difference.
While using Plan Region, Some of the walls dont show as cut, though their height is more & above the Cut Plane Level.
I did find a quick solution online here - [URL] ... This trick is still not working for some of the walls..
View 1 Replies
View Related
Nov 22, 2012
I need to create a wall the has a profile (in plan view).
View 1 Replies
View Related
Aug 20, 2013
How do you make a wall that's not rectanglar (in plan view)?
See attached image.
The brown color at the end of the wall indicates the polygonal shape which should be part of the wall.
View 2 Replies
View Related
Mar 2, 2012
How do I turn on/off wall elements in my plan view? I'd like just the core structure to show for dimensioning purposes and turn off the sheathing etc.
View 6 Replies
View Related
Apr 12, 2012
I have a finished floor plan with 5.5" thick walls, but now i want to make all my walls thicker without changing the size of my rooms. What i can do to achieve this. I tried locking the wall dimensions before changing their thickness but it still shrunk my room sizes.
View 4 Replies
View Related
Jul 25, 2012
I have a model done and cutting a Foundation plan and then dressing it out. I want to use the architectural dimensions but needing to offset the column bubble at the stair pad as you can see on the attached dwg. I cannot figure out how to adjust the dimensions with out having to manually draw a dim line.
View 3 Replies
View Related
Aug 6, 2012
In floor plan view how do I make a wall have a concrete texture inside instead of the default (criss cross)?
View 9 Replies
View Related
Nov 15, 2012
How do I show high level walkways and balconies (in dashed outline) on the ground floor plan in a high volume space?
Obviously I can turn the first floor RCP on in the view and manually draw the information, but I assume these lines won't move if the walkways above move (or am I wrong?). Also this seems slightly wrong given the amount of automation available.
View 4 Replies
View Related
Feb 4, 2014
I am having issues with isolated foundations not showing as cut when the cut plan is through the foundation. The wall foundations are shown cut, but I cannot get the isolated foundations to show cut. I verified by wall sections that both foundation types are definitely passing through the cut plane.
View 9 Replies
View Related
May 2, 2013
Just what the title says. Walls dont appear when drawing in plan view but appear in the 3d view. how come??
View 1 Replies
View Related
Nov 6, 2011
I'm new to Revit. For instance I was working on adding foundation slabs to my walls .. all walls were done and had slabs beneath them and one wall still didn't have any. Once I tried to add the slab to that particular wall ( just by clicking on it, like ive done with every other wall ) it fails to do so and doesn't add any slab.
But my main problem is, sometimes when I work on my project everything becomes UNCLICKABLE, I do not know what im doing wrong and the only way for me to add walls or anything is by clicking CTRL+Z untill the meny gets highlighted again.
Ive put a screenshot in the folder.
View 1 Replies
View Related
Jul 16, 2007
I am having a little trouble with some doors showing up on the level 1 door schedule that are actually on level 2. They are curtain wall doors.
View 6 Replies
View Related
Aug 30, 2012
I drew a stone wall with the free hand tool and used a 1.0 line width, but since the ends of the lines are square I have jagged edges in places. I tried using the eraser but as soon as I let go of the mouse button what I erased pops back. I was thinking about converting to a bit map and smooth it out that way, but I need it as a vector file. So after I convert it and clean it up can I convert it back?
View 11 Replies
View Related
Jun 18, 2013
The underlay does not show up for Level 1 when I am on Level 2, but it does show up for Level 2 when I am on Level 1. the underlay option is on for Level 1, so I'm not sure why it's not showing up. I am using Revit 2014.
View 1 Replies
View Related
Oct 5, 2011
I have a single plan referenced in twice (one mirrored from the other) as this is a duplex. I need to turn a level on in one Plan that I do not wish to be on in the other Plan.
View 9 Replies
View Related
May 30, 2012
I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies
View Related
Apr 12, 2012
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies
View Related
Jul 25, 2013
I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
View 9 Replies
View Related
Dec 4, 2012
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies
View Related
