Revit :: Creating A Family Component For Wall Foundation?
Aug 12, 2008
I would like to create a family component using the wall foundation bearing footing as a template. I cannot find the file where the templates are located. I tried using the structural footing template but it would not give me the same flexibility the wall foundation bearing footing template does.
View 2 Replies
ADVERTISEMENT
Oct 30, 2012
I want to Create a Wall Nitch that will be in a tiled shower we are doing. Best way to create a family that cuts into a wall? I don't want to Create an opening, because I don't want it going all the way through the wall.
View 4 Replies
View Related
Nov 29, 2011
I am creating a folding door model and would like to use a parameter called EXERIOR WALL OFFSET. I have used this parameter before but am having trouble getting it to work within my family. The only difference is that I created one frame/jamb instead of 4 seperate profiles. The question is, why can't i get the jamb to move within the wall using the exterior wall offset parameter? It seems to move the sash/panels just fine but the jamb is constrainted somehow.
View 1 Replies
View Related
Jan 27, 2012
See the attached PDF file.
I can't move down the wall foundation. (The highlighted piece.) What's the reason of it? The properties of the wall foundation doesn't have the offset feature.
View 2 Replies
View Related
Feb 26, 2011
I am having trouble placing a wall foundation under a curtain wall in my project. Revit says that a foundation has been added but it is not visible in any view. I've tried editing the visiblity properties but that didn't fix the probelm.
View 3 Replies
View Related
Dec 4, 2012
I'm having problems seeing the walls I drew at the foundation level in this project. The walls should be shown but I can't get to see them except in a 3d view. Also, when i intended to draw them, I think I should have done it from the foundation level plan but I could not set the plan view to see the above objects in order to draw from them. I drew it from another level and then I modified their base and top constraints afterwards..
I tried to modify the view range of the foundation level without success.
View 6 Replies
View Related
Mar 25, 2013
I've been doing some family as an independent construction detail revit model, I think that is the most appropriate type of detail component. Graphically everything right but I encounter the following problem, all built to type text is not visible in the project then.
How do you control the display? or do you like I can put a text in a detail component family? and if not visible... why would have the option of make texts? Is the only option to annotate after in the project insertion?
View 3 Replies
View Related
Jul 25, 2013
Made a family with two family types, a red and a blue. when i load it into my project it comes up gray..Another component family the color comes in fine
View 1 Replies
View Related
Oct 20, 2010
Is it possible to create the Wall family in revit?
View 5 Replies
View Related
Apr 24, 2013
I am creating a fireplace family in Revit Architecture 2012 with wall host (Speciality equipment with Wall host). I selected the template created the family, but in mean time i can't understand the wall is having delete option.(i.e it is released from host). I am surprised to see that in the family type, the wall host is missing.
View 1 Replies
View Related
Oct 17, 2011
Created a family with category 'column' in order to make in room bounding.
This family is basicly some extrusions. nothing fancy about that. However when placed in my model these extusions merge with the wall and inherit their properties which I don't want.
View 3 Replies
View Related
Feb 16, 2012
I would like to cut a void into the wall of a host window family. When I place a void in the family, it does not cut thought the wall.
I tried making the void on a plane perpendicular and parallel to the wall plane. I dont know if this has anything to do with how voids work. But its not working. I also dont have an 'opening' element in the window family.
View 1 Replies
View Related
Sep 24, 2012
I don't know if this is possible, but can a door family read the rating of a wall and also have it read in the door schedule? I have tried applying a shared parameter on the door family and adding it in the project. I am not understanding how I can link the two together.
View 2 Replies
View Related
Mar 24, 2013
In assigning a material for a new wall exterior component, I see no other material option other than brick, yet there are many materials sutable.
View 3 Replies
View Related
Jul 10, 2008
I was able to bring in custom curtain wall panels as legend components-- however, when I set the host length, the height is automatically the same. Is there a way to insert a curtain wall panel into a legend that will have a rectangular shape (in my case, taller than it is wide)?
View 1 Replies
View Related
May 29, 2013
I am trying to build a curtain wall panel family (see attached). I want the extremities of the solids to be glued to the surrounding frame. I want to be able to scale the model inside the frame with different curtain wall panel system sizes. 5'x4', 6'x8' etc... I am having problems with restricted constraints. I do not know what I am doing wrong. the model inside the panel are created from soild extrusions. if I align the solid extrusion from one side of the frame , only that side will grow or shrink with frame, and makes the model look weird. I tried to group the solids with reference lines in them glued to the reference line grid i created in the panel and that did not work. I want to be to scale proportionally the model inside the panel.
View 6 Replies
View Related
Jul 19, 2012
I am working on my first real Revit project. i need to modify a windows family and in particular i want to change the axis of insertion of the window in the wall. I mean... my window should be placed on the outer edge of my wall. i try to unlock the dimensions that define its position and then i lock the dimension in the new position; the window seems to be ok but only in the RFA file. When i imported it in my project file, the windows moves in the wrong way in my real wall.
View 4 Replies
View Related
Mar 8, 2011
I'm trying to make a Wall Types Legend using the Legend function in 2011. I did the first wall type just fine, placed it in section, tagged the material, etc. Now when I go to place another wall in a section view, it tells me the component is not visible in selected view. They are both new construction phase, stacked walls.
View 3 Replies
View Related
May 21, 2013
I downloaded a grab bar family that I thought looked very good. But then I tried to place it on the toilet stall portion (I also downloaded stall partition families). When I tried to place the grab bar, it wouldn't place -- I believe because the grab bar is WALL BASED.
So now the question is how do I go about placing a grab bar (or anything else) that is not wall based so that I can use it with the stall portion? I had tried to use face based but couldn't get that too work.
View 5 Replies
View Related
Jun 10, 2013
I am trying to create a custom planter based off some line work that I did in my project. It has a curve. basically what I have done is created the line work on plan but now I want to use that curved line to create my family. which I am thinking I can create a profile and then sweep it on those lines. The problem is I can get the line work to the family.
View 2 Replies
View Related
Nov 14, 2011
How to create a adjustable_angle Bi-fold door family.
View 4 Replies
View Related
Feb 21, 2012
How do I create simple wall types? I would like to create 2x6 and 2x4 walls with 7/16" OSB on them. I would like to see each stud when I going into 3D and I would like the dimensions to be from face of framing; not the OSB or centerline.
I would like to mimic the plan dimensions when I input the building into Rivet. Basically, I want to build a stick framed home so I can add the floors, walls and roof and then go into the mechanical and see how it all stacks out and is going to come together.
View 7 Replies
View Related
Feb 13, 2006
I have tried 2 methods of generating a parapet cap:
1 - Creating a wall style with the sweep.
2 - Added a host sweep.
The problem is that using either method or a combination of both methods doesn't always work. I still end up with some caps that don't miter correctly even after editing. Sometimes, different intersections will miter and others won't.
View 9 Replies
View Related
Apr 18, 2013
I am trying to create a sloped wall by creating a mass in-place. First I draw a line on a surface at a pre-determined level that I've set up in elevation. Then I offset this line in the vertical plane. My next step is to offset this second line so that it is not directly above the original line, but offset in the horizontal plane. How do I change from a vertical to a horizontal offset? I’ve tried different work planes, but they all offset vertically.
View 6 Replies
View Related
Jul 22, 2013
I'm trying to create a Tiled Skirt (150x150mm) profile or pattern to be used as Wall Sweep. Is there anyway to create this profile as the Family Template: metric profile (wall hosted) only allow me to create a 2D profile.
I would prefer to avoid detail lines or Filled region to get the tiles shown as I need to schedule and quantify this element.
View 1 Replies
View Related
Aug 9, 2013
When I create the surface in conceptual mass and bring that in revit project and apply wall by face I see interior face of wall going exterior.
Can this be set in conceptual massing while creating surface so that when I apply wall by face interior face remains interior.
View 7 Replies
View Related
Jun 20, 2012
Most of the interior walls in the house are the same materials and finishes - finishes of veneer plaster painted, but rooms are to be differnent colors. I can make a wall the color that I want, but ALL that type walls become that color. Is there any way to make several different colors of rooms witihout creating literally dozens of different wall types?
View 4 Replies
View Related
Feb 4, 2014
I am having issues with isolated foundations not showing as cut when the cut plan is through the foundation. The wall foundations are shown cut, but I cannot get the isolated foundations to show cut. I verified by wall sections that both foundation types are definitely passing through the cut plane.
View 9 Replies
View Related
May 2, 2013
Just what the title says. Walls dont appear when drawing in plan view but appear in the 3d view. how come??
View 1 Replies
View Related
Jan 29, 2014
I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
View 3 Replies
View Related
Aug 23, 2011
I am already using autocad and Covadis (because I'm road-design, etc. ...-); I'm new building and I use Revit Architecture 2011
Already I do not understand why my isolated foundations are not visible in plan view when the footings are beautiful and well visible in the plan view,...
View 1 Replies
View Related