Most of the interior walls in the house are the same materials and finishes - finishes of veneer plaster painted, but rooms are to be differnent colors. I can make a wall the color that I want, but ALL that type walls become that color. Is there any way to make several different colors of rooms witihout creating literally dozens of different wall types?
View 4 Replies
How do I create simple wall types? I would like to create 2x6 and 2x4 walls with 7/16" OSB on them. I would like to see each stud when I going into 3D and I would like the dimensions to be from face of framing; not the OSB or centerline.
I would like to mimic the plan dimensions when I input the building into Rivet. Basically, I want to build a stick framed home so I can add the floors, walls and roof and then go into the mechanical and see how it all stacks out and is going to come together.
I want to make a list of all the wall types i have defined in our project-template.
But when i try the schedules i only seem to be able to list those that are "in use"?
Legend view seems totally useless as you cannot tag or list the elements and info like "description" etc.
This is the first time I experience a major problem with Revit 2012. I created a duplicate of an 8" concrete masonry wall for my student project. Then I selected the Edit option in the Structure to change the rendered material to concrete masonry. Suddenly the program freezes and crashes. A window pops up stating that Windows has detected a problem with Revit and must shut the program down. I've everything since my last save. As of now, I recreated a duplicate of the masonry wall I need and started drawing some of the walls for my project but I'm afraid to experiment with other materials. Background Information about my computer: I downloadeda free version of Revit 2012 student software to practice at home. I have Windows 7 64-bit, 6GB of Ram and Intel (R) Core i7 2.20GHz...(I checked all the software requirements before downloading the correct version of Revit 2012)
Do I have to uninstall the program and reinstall it again? Would the problem go away?
I'm trying to make a Wall Types Legend using the Legend function in 2011. I did the first wall type just fine, placed it in section, tagged the material, etc. Now when I go to place another wall in a section view, it tells me the component is not visible in selected view. They are both new construction phase, stacked walls.
View 3 Replies View RelatedI'm trying to separate my ground floor slab into two different slabs each with a different stratigraphy of layers. How can I do this? I've edited the footprint so that it looks like there are two distinct floor boundaries but when I go to select the floor in order to edit the type, the entire floor, or both "pieces" get selected and I can't seem to just edit one piece...
View 1 Replies View RelatedI am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.
View 9 Replies View Relatedhow to have different colors for different wall faces? Like all have a plaster finish on the external side, but the colors are different, but when I try to change the color of the external finish, it changes it for all the walls.
View 5 Replies View RelatedI received a linked revit drawing. The sender highlighted my walls the color blue in 3D mode.I would like to diferentiate the wall colors even futher - i.e. red, green, etc...but how do I do this?
View 2 Replies View RelatedI want to Create a Wall Nitch that will be in a tiled shower we are doing. Best way to create a family that cuts into a wall? I don't want to Create an opening, because I don't want it going all the way through the wall.
View 4 Replies View RelatedI have tried 2 methods of generating a parapet cap:
1 - Creating a wall style with the sweep.
2 - Added a host sweep.
The problem is that using either method or a combination of both methods doesn't always work. I still end up with some caps that don't miter correctly even after editing. Sometimes, different intersections will miter and others won't.
I would like to create a family component using the wall foundation bearing footing as a template. I cannot find the file where the templates are located. I tried using the structural footing template but it would not give me the same flexibility the wall foundation bearing footing template does.
View 2 Replies View RelatedI am trying to create a sloped wall by creating a mass in-place. First I draw a line on a surface at a pre-determined level that I've set up in elevation. Then I offset this line in the vertical plane. My next step is to offset this second line so that it is not directly above the original line, but offset in the horizontal plane. How do I change from a vertical to a horizontal offset? I’ve tried different work planes, but they all offset vertically.
View 6 Replies View RelatedI'm trying to create a Tiled Skirt (150x150mm) profile or pattern to be used as Wall Sweep. Is there anyway to create this profile as the Family Template: metric profile (wall hosted) only allow me to create a 2D profile.
I would prefer to avoid detail lines or Filled region to get the tiles shown as I need to schedule and quantify this element.
When I create the surface in conceptual mass and bring that in revit project and apply wall by face I see interior face of wall going exterior.
Can this be set in conceptual massing while creating surface so that when I apply wall by face interior face remains interior.
I have modeled a building that's a typical shoe box (rectangular shape building).
When I searched the address in Google earth, the true north of the site is not perpendicular to the building: it's angled.
When I chose "Acquire from Google earth" at the Site level, it gave me exactly what I saw in Google earth.
My question is:
I have finished the model of the building in Revit which doesn't align with what I acquired from Google earth. How do you align the model to the Google earth image? Do you have to literally rotate the entire building to align the Google earth image?
Also is there a difference between Google earth and Google earth pro for this task?
How do you tag the rooms that are not fully enclosed by the walls?
View 1 Replies View RelatedA corridor adjacent to a room reads as one room. How do I separate the rooms so that each has it's own tag?
View 1 Replies View RelatedI am creating a folding door model and would like to use a parameter called EXERIOR WALL OFFSET. I have used this parameter before but am having trouble getting it to work within my family. The only difference is that I created one frame/jamb instead of 4 seperate profiles. The question is, why can't i get the jamb to move within the wall using the exterior wall offset parameter? It seems to move the sash/panels just fine but the jamb is constrainted somehow.
View 1 Replies View RelatedI’m working on a house plan. Normally we measure the room and write the sizes like Bedroom 11’9 x 11’. Is there a smart way to do this like we tell revit areas to measured and it gives the size like this only in a pxq form?
View 2 Replies View RelatedCurrently I have created Rooms and a Legend such that I have a coloured Plan View by Room department.
The colour boundaries extend to the centre line of the defining Walls. Is there a way to get the coloured zones to follow the Room boundaries?
I realise I can overwrite the Wall pattern and use a Solid pattern to hide the colour - but this is not what I want ...
I want to be able to add rooms through the schedule prior to placing them in the model. I thought I would be able to do that by going to the Modify Schedule/ Quanties Tab and clicking New in the Rows columns but the new option is blanked out and not selectable.
View 5 Replies View RelatedI have a project that has existing rooms that need to stay existing and new rooms. Is there a way to get both types of rooms into a Room Finish Schedule?
I can't seem to get both to coexist in one schedule. I would hate to place New room in the new construction phase to make this happen.
I have received some architectural models which were modeled in AutoCAD MEP and only have walls modeled as type Standard. Is there a way to transform Standard walls into cavity walls etc., giving wall makeup as you go - or do I have to re-model in order to get quality 2D cuts?
View 1 Replies View RelatedHaving something very strange happen out of the blue.Have wall types like lightweight block (Component Priority = 300) and stud gyp walls (Component Priority = 500) suddenly cleaning up w/ each other.
Hasn't been happening before when base lines extend to each other, but suddenly on this new project they are.
I am expanding on my modeling w/ this project. I taken another step in 3D modeling w/ ACA and am extending walls vertically to multiple floors and referencing the base floor plan into (below) the base file of the second floor. Everything is working as I expected and set up EXCEPT for this one thing. Hard to point to this as the difference because I'm having this issue on the first floor....where the reference issue is not part of the equation.
Also, know there is a way for my lightweight block walls on the second floor to clean up/merge w/ lightweight block of the exterior walls being referenced in...but can't find where that "check box"/switch is. Found it many moons ago, but didn't need it then.
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedI have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedRefer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.
