I have received some architectural models which were modeled in AutoCAD MEP and only have walls modeled as type Standard. Is there a way to transform Standard walls into cavity walls etc., giving wall makeup as you go - or do I have to re-model in order to get quality 2D cuts?
View 1 Replies
I am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.
View 9 Replies View RelatedHaving something very strange happen out of the blue.Have wall types like lightweight block (Component Priority = 300) and stud gyp walls (Component Priority = 500) suddenly cleaning up w/ each other.
Hasn't been happening before when base lines extend to each other, but suddenly on this new project they are.
I am expanding on my modeling w/ this project. I taken another step in 3D modeling w/ ACA and am extending walls vertically to multiple floors and referencing the base floor plan into (below) the base file of the second floor. Everything is working as I expected and set up EXCEPT for this one thing. Hard to point to this as the difference because I'm having this issue on the first floor....where the reference issue is not part of the equation.
Also, know there is a way for my lightweight block walls on the second floor to clean up/merge w/ lightweight block of the exterior walls being referenced in...but can't find where that "check box"/switch is. Found it many moons ago, but didn't need it then.
I can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedI'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
I can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?
I simply want to convert an existing curtain wall to another wall type how is that done/
How do I create simple wall types? I would like to create 2x6 and 2x4 walls with 7/16" OSB on them. I would like to see each stud when I going into 3D and I would like the dimensions to be from face of framing; not the OSB or centerline.
I would like to mimic the plan dimensions when I input the building into Rivet. Basically, I want to build a stick framed home so I can add the floors, walls and roof and then go into the mechanical and see how it all stacks out and is going to come together.
I want to make a list of all the wall types i have defined in our project-template.
But when i try the schedules i only seem to be able to list those that are "in use"?
Legend view seems totally useless as you cannot tag or list the elements and info like "description" etc.
This is the first time I experience a major problem with Revit 2012. I created a duplicate of an 8" concrete masonry wall for my student project. Then I selected the Edit option in the Structure to change the rendered material to concrete masonry. Suddenly the program freezes and crashes. A window pops up stating that Windows has detected a problem with Revit and must shut the program down. I've everything since my last save. As of now, I recreated a duplicate of the masonry wall I need and started drawing some of the walls for my project but I'm afraid to experiment with other materials. Background Information about my computer: I downloadeda free version of Revit 2012 student software to practice at home. I have Windows 7 64-bit, 6GB of Ram and Intel (R) Core i7 2.20GHz...(I checked all the software requirements before downloading the correct version of Revit 2012)
Do I have to uninstall the program and reinstall it again? Would the problem go away?
I'm trying to make a Wall Types Legend using the Legend function in 2011. I did the first wall type just fine, placed it in section, tagged the material, etc. Now when I go to place another wall in a section view, it tells me the component is not visible in selected view. They are both new construction phase, stacked walls.
View 3 Replies View RelatedMost of the interior walls in the house are the same materials and finishes - finishes of veneer plaster painted, but rooms are to be differnent colors. I can make a wall the color that I want, but ALL that type walls become that color. Is there any way to make several different colors of rooms witihout creating literally dozens of different wall types?
View 4 Replies View RelatedI bought Autocad Arch. 2008 for my Dell Laptop and now my laptop is going down hill fast. It is 5 years so I'm not expecting to much. I'm looking to replace it with one of the new Macbook Pros.
View 6 Replies View RelatedSeveral users here in my office have been having a strange issue with ACA 2011. When doing various things such as, saving, regen'ing, or manually switching between open drawings, ACA will "blink" to a completely different drawing.
For example, right now I have 4 drawings open. I'm trying to go from drawing A to drawing B. It goes to drawing B and starts to regen model space, then it blinks back to drawing A. Does the same for any of the 4 drawings. Only way to make it stop was to close drawing A.
As I said, it not only does this when switching drawings. It'll also do it after it's done saving and when I try to regen.
I am new to 3D modeling after getting quite skilled in the 2D area.
Problem: I cannot seem to access the 3D modeling workspace switch down in the bottom right of the screen, it just comes up with the active 'Architecture' with no other options. In some Tutorial videos I have seen an option to select '3D modeling' but this is not the case for me. I have also tried using the quick access toolbar to customize and add a 'Workspace 3D Modeling' button but this has not worked either. What I want to do is the change the ribbon thus tabs to the the 3D Modeling mode so I can go from there. (Using 2011 version.)
i have a file that contains over 7,000 unused line types that will not purge. they are from imported dwg files.
i tried the fix below, but was told "file not found". any other methods available?
AutoCAD_2013_2014_DGN_CleanUp_Tool.exe
We've been having some issues that have only recently cropped up. If I am in a drawing named FP-00.dwg and I am working, saving regularly, etc. everything is fine. If a co-worker opens up the same file, he will sometimes (10%) NOT receive the read-only pop up and he will open the same drawing with full rights. Then, if I go and try to save, I will be alerted that the file is in use, and my file will be switched to read-only. When I have to do a saveas, the file then changes the default name to: FP-00.fdwg (notice the "F" in front of .dwg).
I posted this to the AutoCAD Architecture group, b/c we are currently using Architecture 2k8.
No one has changed out Open/Save options, and we haven't been losing the connection with our server.
I'm attching a PS of the Open/Save setting.
Trying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
I have just started working with Architecture 2011, so perhaps there is some strange issue at work here, but I haven't come across it previous releases. Whenever I switch from model tab (in 2D wireframe) to a layout tab and then back to model space, the visual style automatically switches itself to "Wireframe" or "3D Parallel Project", instead staying 2D Wireframe. It is highly annoying as I have to hit the 2D Wireframe button on the Visual Style Menu everytime a switch. This also occurs everytime a hit the Save button. It won't stay put in the visual style that it should.
View 6 Replies View RelatedI used to be able to snap to the end of the linework that form the visual end or intersection of walls while grip dragging a wall of one style to another. For example, using a wallstyle as a countertop, I'd be able to drag it to the corner of a room and use object snap to the intersection. In ACA 2012, the object snap defaults to the justification plane of the wall even if that's not where the intersection snap is desired.
View 6 Replies View RelatedI quite often like to use the wall grips to adjust the length of a wall. This works really well accept for the occasional situation were I want to snap to the face of another wall rather than the justification line. I know that I can snap to the face of a wall rather than the justification line because I have some files that it works fine in and other files that it does not work in.
View 2 Replies View RelatedIn Revit there is a tool to convert lines to walls including lines of an xrefed AutoCAD file. Is this feature available in ACA?
View 3 Replies View RelatedI did a drawing in ACA2011 sent it to my remote office where I have ACLT for mac 2013 (trial). Worked on the file,
had to explode the couple of walls I was editing, saved as 2011 or 2010 file.
When I open the file in ACA2011 I can not execute the wall tool. This is the message received:
Command: _AecWallAdd Command not allowed because drawing contains objects from a newer version of this application.
The new objects would be lines.
My boss wants me to make the most outside line of a walltype to be the heaviest pen. If I go to the properties of the wall and changethe boundary it changes the boundary of the item in the wall, each boundary independentfrom the other. Such as a wall made of the following: BRICK, AIR SPACE, SHEATHING,STUD AND GYPSUM BOARD. In this wall theexterior face of the brick and gypsum board need to be heavy.
View 4 Replies View Relatedhave trouble moving doors or windows within a wall?
I am trying to move a door so that the door is flush with a face of wall. The prompts in acad do not match the instructions.
For instance; select door, okay. then from anchor panel select 'reposition within wall', okay a red line appears and prompt to 'select position on the opening'. okay so i click the face or side of door jamb then select a reference point. (guide says select point to measure to) and on and on. Door never moves.
it should be; select door, select reposition in wall, select reference point (interior, exterior, midpoint), select the desired location. Done.
Instead it is select this that and the other , measure from here, select, click.click click.
In AutoCAD Architecture 2012: when we insert standard windows in the wall, we usually get a wall break. After changing window size to small (2’ high), this wall break disappears in the plan, but still have it on isometric or perspective view.
View 1 Replies View RelatedIs it possible to create a wall in AutoCAD Architecture that will change in size along its length. At one end of the concrete wall the wall thickness is 12", at the other end the wall thickness is 24" thick. The wall will grow in size from one length to the other.
View 6 Replies View RelatedI'm just trying to put a wall under a stair and it seems like I can not succeed. Already tried with interference, body modifiers and trimming.
View 2 Replies View RelatedWhy would a window not go into a wall?
I have a client who is having this issue - when I open the file it works fine for me.
Is there a system variable or setting that could cause this?
I've got a wall style that has multiple components. I have changed one component so the bottom starts 12" below the baseline ht of the wall.The section window display reflects the change, but the wall style won't update.Is there a setting I'm missing somewhere.
View 2 Replies View RelatedHow to group wall types together when scheduling a drawing?
I have multiple wall types within a drawing but scheduling produces multiple entries per type depending on length, only grouping them together when lengths are identical. All I need is a total length per wall type within the drawing.
I've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View Related
