I bought Autocad Arch. 2008 for my Dell Laptop and now my laptop is going down hill fast. It is 5 years so I'm not expecting to much. I'm looking to replace it with one of the new Macbook Pros.
View 6 RepliesWe would like to have everyones workspaces on each computer. So if I have a problem with my computer and Bob is gone, then I can work on Bob's computer with my workspace. Then Bob can come back and switch back to his workspace.
Where do I find the workspace, so I can copy it to the other computers?
We installed Autocad LT 2014 on our new computer and I noticed that it is unusually slow to switch between layouts.
The bottom bar (where the paper/model space button is) kept flashing/switching as if its thinking whenever i click from one layout to another. Even when I'm zooming in and out, the bottom bar kept flashing slowly.
I was hoping that a new computer+new cad will make our work more efficient and faster, but i noticed theres a lot of lagging and general slowness in loading files.
Problem 1 Most of the time when I am switching in between drawings that are open I have to "regen" the drawing that I switch to as nothing shows up when I switch.
Problem 2 Problem is copying layouts over. When I go to designcenter and then open drawings I try and drag a layout into a different drawing. Somtimes it works but usually I drag it onto the drawing and the new layout doesn't appear. I had this problem ever since I switched from 2010 to 2011 and now 2012.
Several users here in my office have been having a strange issue with ACA 2011. When doing various things such as, saving, regen'ing, or manually switching between open drawings, ACA will "blink" to a completely different drawing.
For example, right now I have 4 drawings open. I'm trying to go from drawing A to drawing B. It goes to drawing B and starts to regen model space, then it blinks back to drawing A. Does the same for any of the 4 drawings. Only way to make it stop was to close drawing A.
As I said, it not only does this when switching drawings. It'll also do it after it's done saving and when I try to regen.
I have received some architectural models which were modeled in AutoCAD MEP and only have walls modeled as type Standard. Is there a way to transform Standard walls into cavity walls etc., giving wall makeup as you go - or do I have to re-model in order to get quality 2D cuts?
View 1 Replies View RelatedI am new to 3D modeling after getting quite skilled in the 2D area.
Problem: I cannot seem to access the 3D modeling workspace switch down in the bottom right of the screen, it just comes up with the active 'Architecture' with no other options. In some Tutorial videos I have seen an option to select '3D modeling' but this is not the case for me. I have also tried using the quick access toolbar to customize and add a 'Workspace 3D Modeling' button but this has not worked either. What I want to do is the change the ribbon thus tabs to the the 3D Modeling mode so I can go from there. (Using 2011 version.)
One to Five people has the same project loaded into their Project Navigator.
One of the people opens a plot sheet while using the Project Navigator.
ALL computers with that project loaded experience an Autocad 2011 Crash.
-No Error Message appears.
-Autocad shuts down completely with no warning.
-Simultaneously!
This only occurs with DWG files located under the Sheets Tab of the project navigator.
It is not Project specific. This has occured for different users in our office with different projects open. However Autocad only crashes for the users with the specific project accessing the plot sheet loaded.
We recently made the switch from 2009 to 2011. So far this is only a problem for projects where the plotsheets were created in 2009. We can't go back to 2009 to plot since the walls etc have now adapted to 2011.
We've been having some issues that have only recently cropped up. If I am in a drawing named FP-00.dwg and I am working, saving regularly, etc. everything is fine. If a co-worker opens up the same file, he will sometimes (10%) NOT receive the read-only pop up and he will open the same drawing with full rights. Then, if I go and try to save, I will be alerted that the file is in use, and my file will be switched to read-only. When I have to do a saveas, the file then changes the default name to: FP-00.fdwg (notice the "F" in front of .dwg).
I posted this to the AutoCAD Architecture group, b/c we are currently using Architecture 2k8.
No one has changed out Open/Save options, and we haven't been losing the connection with our server.
I'm attching a PS of the Open/Save setting.
Trying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
I bought CS5 Extended for windows about a year ago, but just recently I bought a new Mac book Pro. Is there any way of getting my old program onto my new computer?
View 3 Replies View RelatedI recently saved an image on Photoshop CS6 as a PNG file so I could send it as an attachment to a client (who uses a Windows computer). They told me the file wouldn't open and instead showed as an "Unknown File".
I tried opening the file on my Windows computer, as well as a JPEG version to test out, but both came up as "Unknown Files".
The only way I could transfer the files I saved in Photoshop was to export them as PNG through the 'Preview' application.
Is there a reason why these normal formats won't open properly?
I have just started working with Architecture 2011, so perhaps there is some strange issue at work here, but I haven't come across it previous releases. Whenever I switch from model tab (in 2D wireframe) to a layout tab and then back to model space, the visual style automatically switches itself to "Wireframe" or "3D Parallel Project", instead staying 2D Wireframe. It is highly annoying as I have to hit the 2D Wireframe button on the Visual Style Menu everytime a switch. This also occurs everytime a hit the Save button. It won't stay put in the visual style that it should.
View 6 Replies View RelatedI've had a couple occurrences of X6 crashing suddenly, but a common one is when I've switched away from X6 and then try to switch back by clicking on the X6 icon on the Windows 7 taskbar. I'm running Win7 64bit. When I hover my mouse over the CDX6 icon on the taskbar, a couple of the preview mini-windows will show the Windows "working" round rotating icon for about a half second and then BAM - the windows "This Program is Not Responding" window comes up where you choose to either let windows find a solution (it never does), or just close the program.
I never have any trouble opening the program back up, or working with the exact same files that were open when it crashed. It does seem to happen when I have multiple files open, but I almost always am working with 3-4 at a time.
I am working on drawing a simple garage with a few windows throughout it. After inserting the windows in the wall where I want them, I cannot see them from the top view. If I switch to an isometric view they are visible and exactly where I want them. what I may do to make these visible from the top view?
View 1 Replies View RelatedHow I would create a triple hung window?!
View 1 Replies View RelatedUsing Autocad or Autocad Architecture on a Microsoft Surface with Windows Pro 8
View 3 Replies View RelatedI don't recall changing any features in AutoCAD 2013 that would take away my ability to type in the distance that I would like to place doors or windows along my walls, but now that it has been disabled and I don't have it.
View 2 Replies View RelatedI have an assebly with the door going down to grade level and the flanking windows 30 inches up. I used a profile to create the assebly shape. In plan you cannot see the brick below though you can see it between the assemblies.
View 5 Replies View RelatedMy autodesk loaded on windows 7 but will not open up.
View 3 Replies View RelatedI am getting a message:
"the system cannot open the device or file specified".
C: emp\_AIA9B6.tmpx86en-uscomponentsadr2012setupdesignreview2012.msi
i then search *.msi file and got another message:
microsoft visual C++ 2010 redistributed is required to continue w/ installation.....
I have admin privs, running net 4, sufficient memory
I'm just looking to find the appropriate driver for a HP Designjet 750C for 64-bit windows 7
View 9 Replies View RelatedMy ACAD hangs when I try to open/save. I've reinstalled the computer with only Op + ACAD. The second a explorer window opens, ACAD hangs. Tried different install options for 3 days now.
View 9 Replies View RelatedWe have a house plan that has windows and doors of different types anchored to their walls. It seems that whenever someone is working in a file from the network that has the plan xrefed into it and the plan is opened to be modified by another user the windows and doors randomly detach from the walls. We're getting tired of going back in and reanchoring them.
(We're using Autocad Architecture 2009 on Vista)
The Look In: Drop down for Open drawing locks ACA 2014 up. I have to end task and reopen ACA to work.
2014 and Windows 8?
I have been trying to use my ERASE command in order to use a window polygon but I'm not getting the results in need. This is what happens....
I type in ERASE, then WP and from there I select my polygon shape and the items I want deleted. I don't join the last endpoint of the window with the first point I just hit ENTER twice but nothing happens.
Recently we had a user pose the inquiry regarding lost files from users when trying to save files to the network from the windows 7 computers. They would look and act like they were being saved to the mapped drive from the network but when they returned the next morning the work was gone.
<Verified environment and settings were all within specifications and supported>
Okay so to start with I have a building with 2 staircores. Everything is drawn in 3d and I have drawn the 2 staircores as elements and subsequently Xrefed these elements into the relevant constructs and subsequently a 3D model view.
When I view the elements as a live drawing (ie. when I open the individual elements) the drawing views okay in plan and in 3D wireframe, hidden mode etc... no problem so far!
When the drawing is Xrefed into a construct and subsequently a 3D model all of the windows and doors disappear... but in 3d only - ie. viewed in plan mode they are fine. I have checked the display configurations in the constructs and views and they are all set to display these objects in the medium detail and high detail for the model and plan modes.
In 3d wireframe mode the windows and doors can be seen within the wall but the opening which they should create is non-existent!This occurs in teh construct and view drawings.
Here's the catch.... I have a 'West Staircore' and and 'East Staircore'. Both are drawn as individual elements. The West staircore is giving trouble, but the East is perfect. They were both set up using the same DWT file which means that the default display configuration settings should be identical.This is backed up by the fact that they view correctly in the live element drawings.
When they are both Xrefed into the same construct, one is fine and the other will not display in the 3D model!
I am having a problem in an elevation view where the surface hatch covers the windows after I apply a Modify Roofline command in the construct.
When I look at the elevation in an isometric view you can see the surface hatch go through the windows. When I refresh the elevations after the construct xref is reloaded after Modify Roofline command the windows are no longer visible.
If I reset the modify roofline command in the construct, reload the xref in the elevation the elevation returns to normal.
I'd like to figure out why after the modify roofline command the windows are covered in the elevation but not in the construct view.
My problem is similar to the "send behind"/"bring to front" commands that you use when you're drawing. But my issue is this: what wastes a lot of time for me in the new program is when I try to work in multiple windows at once. (Btw, we don't have large screens to work with here.) Usually what I'll do is have, say, three or four windows up at a time, none of which are maximized, and usually have two that I'm working on side by side, with the remaining one or two sitting in the background. I also keep a lot of windows active, and minimized, so that's not the answer I'm trying to find. I work mostly in model space if that makes any difference, though I don't think it should.
Now, not only do the borders of each of my windows get all sorts of funky screen images on them when I move them around (mildly amusing but not annoying), but what really grinds my gears is that the orientation, or layering, or what-have-you, of the windows that I have active and open in the background is not retained. Let's say I have X-1 and A-1 up front and center, and I have A-3 and A-4 in the background. Let's say I had moved A-3 to sit on top of A-4 before I started working on the X-1 and A-1 sheets. Now, in the 2013 version, if I'd slide X-1 or A-1 out of the way, I'd see A-3 sitting right there on top, all happy and pretty where I left it.
I have ACA 2013 (student version) running in the Windows 8 environment. I cannot open anything drawn in a previous release nor can I open a drawing created in ACA 2013 that was installed on the Windows 7 platform.
I have tried to drag in the drawings through design center. That worked for a while now when I try that it causes ACA to crash. Also I have tried multiple drawings that were created in several different versions of ACA. (2004, 2006 and 2009)
As a side note I was able to open those files in ACA 2013 running on the Windows 7 OS.