AutoCAD Architecture :: Microsoft Surface With Windows Pro 8
Mar 11, 2013Using Autocad or Autocad Architecture on a Microsoft Surface with Windows Pro 8
View 3 Replies
ADVERTISEMENT
AutoCAD Architecture :: Modify Roofline Causes Surface Hatch To Cover Windows
May 27, 2013I am having a problem in an elevation view where the surface hatch covers the windows after I apply a Modify Roofline command in the construct.
When I look at the elevation in an isometric view you can see the surface hatch go through the windows. When I refresh the elevations after the construct xref is reloaded after Modify Roofline command the windows are no longer visible.
If I reset the modify roofline command in the construct, reload the xref in the elevation the elevation returns to normal.
I'd like to figure out why after the modify roofline command the windows are covered in the elevation but not in the construct view.
Photoshop :: CS6 Brush Pressure Sensitivity Not Working On Microsoft Surface Pro
Feb 9, 2013I have just purchased a Microsoft Surface Pro in anticipation of running Photoshop on it. I installed Photoshop and tried to do some sketches. I created a new file and started sketching. I Immediately felt like something was wrong. I checked my brush settings and saw the pressure sensitivity was not available. Everytine I tried to turn it on it was marked with an exclamation point.
Does Adobe is supporting the new pressure sensitive pen from microsoft, or if there is some sort of setting that I am missing? I have tried sketchbook pro 2011, and that works amazingly well with the pen.
AutoCAD Architecture :: Surface Hatching - Set Up New Wall Style
Jul 25, 2012I am using ACA 2011. I have a rectangular building with a standard 8" CMU wall pattern. I need to edit that pattern so it reflects a 10x8x8 CMU block. What is the proper procedure to set up a new wall style or can I just tweak the 16" length to show as a 10" length block in this file?
View 1 Replies View RelatedAutoCAD Architecture :: Inserting Objects Into Selected Surface
Feb 6, 2012When using the design pallette tool bar, my objects will not insert into the selected surface? Reasons Why?
View 2 Replies View RelatedAutoCAD Architecture :: Can't See Windows From Top View
Apr 3, 2013I am working on drawing a simple garage with a few windows throughout it. After inserting the windows in the wall where I want them, I cannot see them from the top view. If I switch to an isometric view they are visible and exactly where I want them. what I may do to make these visible from the top view?
View 1 Replies View RelatedAutoCAD Architecture :: Selecting In Menu Surface Doesn't Work
May 17, 2012After a few seconds in the program the menu with all the slides like insert,view,etc. somehow freezes. i can´t pick it anymore. the rest of the program is working,i can work on the work surface with the current tool, but choosing an ew one isn´t possible. i have this problem with different version 2011,12 and even 13....
Working isn´t possible this way.
AutoCAD Architecture :: Switching Computers From Windows To MAC?
Jun 21, 2010I bought Autocad Arch. 2008 for my Dell Laptop and now my laptop is going down hill fast. It is 5 years so I'm not expecting to much. I'm looking to replace it with one of the new Macbook Pros.
View 6 Replies View RelatedAutoCAD Architecture :: Triple Hung Windows?
Jul 8, 2011How I would create a triple hung window?!
View 1 Replies View RelatedAutoCAD Architecture :: Placing Windows / Doors
Oct 2, 2012I don't recall changing any features in AutoCAD 2013 that would take away my ability to type in the distance that I would like to place doors or windows along my walls, but now that it has been disabled and I don't have it.
View 2 Replies View RelatedAutoCAD Architecture :: Door / Windows Assemblies
Oct 18, 2012I have an assebly with the door going down to grade level and the flanking windows 30 inches up. I used a profile to create the assebly shape. In plan you cannot see the brick below though you can see it between the assemblies.
View 5 Replies View RelatedAutoCAD Architecture :: Surface Hatching / Proper Procedure To Set Up New Wall Style
Jul 24, 2012I am using ACA 2011. I have a rectangular building with a standard 8" CMU wall pattern. I need to edit that pattern so it reflects a 10x8x8 CMU block. What is the proper procedure to set up a new wall style or can I just week the 16" length to show as a 10" length block in this file?
View 3 Replies View RelatedAutoCAD Architecture :: How To Show Wall Surface Hatch In Elevation View
Mar 26, 2011ACA 2011. I would like to copy the "standard" wall style add a surface hatch and display that in an elevation (exterior) view. I have played around with this and due to many different places to edit the materials.
I have the elevations created. When I go back into the construct and edit the wall style do I have to re-create the elevations to see the hatch? Or I think I just have something set incorrectly in the style.
AutoCAD Architecture :: Autodesk Loaded On Windows 7 But Will Not Open Up
May 27, 2011My autodesk loaded on windows 7 but will not open up.
View 3 Replies View RelatedAutoCAD Architecture :: Can't Get 2012 To Install On Windows 7 32bit
Jan 8, 2013I am getting a message:
"the system cannot open the device or file specified".
C: emp\_AIA9B6.tmpx86en-uscomponentsadr2012setupdesignreview2012.msi
i then search *.msi file and got another message:
microsoft visual C++ 2010 redistributed is required to continue w/ installation.....
I have admin privs, running net 4, sufficient memory
AutoCAD Architecture :: HP Designjet 750C For 64-bit Windows 7 Driver?
May 13, 2010I'm just looking to find the appropriate driver for a HP Designjet 750C for 64-bit windows 7
View 9 Replies View RelatedAutoCAD Architecture :: Hanging / Stalling / Freezing - Windows 7 SP1 64bit
Apr 21, 2011My ACAD hangs when I try to open/save. I've reinstalled the computer with only Op + ACAD. The second a explorer window opens, ACAD hangs. Tried different install options for 3 days now.
View 9 Replies View RelatedAutoCAD Architecture :: Aec Objects (doors And Windows) Are Detaching From Walls?
Dec 21, 2009We have a house plan that has windows and doors of different types anchored to their walls. It seems that whenever someone is working in a file from the network that has the plan xrefed into it and the plan is opened to be modified by another user the windows and doors randomly detach from the walls. We're getting tired of going back in and reanchoring them.
(We're using Autocad Architecture 2009 on Vista)
AutoCAD Architecture :: Drop Down Locks Up 2014 On Windows 8 64bit?
May 14, 2013The Look In: Drop down for Open drawing locks ACA 2014 up. I have to end task and reopen ACA to work.
2014 and Windows 8?
AutoCAD Architecture :: Erase Command - Polygon Windows Don't Work
Oct 18, 2012I have been trying to use my ERASE command in order to use a window polygon but I'm not getting the results in need. This is what happens....
I type in ERASE, then WP and from there I select my polygon shape and the items I want deleted. I don't join the last endpoint of the window with the first point I just hit ENTER twice but nothing happens.
AutoCAD Architecture :: Files Lost When Saving To Network From A Windows 7 PC / Laptop
May 10, 2012Recently we had a user pose the inquiry regarding lost files from users when trying to save files to the network from the windows 7 computers. They would look and act like they were being saved to the mapped drive from the network but when they returned the next morning the work was gone.
<Verified environment and settings were all within specifications and supported>
AutoCAD Architecture :: Doors / Windows And Openings Fail To Display In 3d Model?
Mar 6, 2012Okay so to start with I have a building with 2 staircores. Everything is drawn in 3d and I have drawn the 2 staircores as elements and subsequently Xrefed these elements into the relevant constructs and subsequently a 3D model view.
When I view the elements as a live drawing (ie. when I open the individual elements) the drawing views okay in plan and in 3D wireframe, hidden mode etc... no problem so far!
When the drawing is Xrefed into a construct and subsequently a 3D model all of the windows and doors disappear... but in 3d only - ie. viewed in plan mode they are fine. I have checked the display configurations in the constructs and views and they are all set to display these objects in the medium detail and high detail for the model and plan modes.
In 3d wireframe mode the windows and doors can be seen within the wall but the opening which they should create is non-existent!This occurs in teh construct and view drawings.
Here's the catch.... I have a 'West Staircore' and and 'East Staircore'. Both are drawn as individual elements. The West staircore is giving trouble, but the East is perfect. They were both set up using the same DWT file which means that the default display configuration settings should be identical.This is backed up by the fact that they view correctly in the live element drawings.
When they are both Xrefed into the same construct, one is fine and the other will not display in the 3D model!
AutoCAD Architecture :: Multiple Open Windows Don't Retain Relative Ordering In 2014
Jun 13, 2013My problem is similar to the "send behind"/"bring to front" commands that you use when you're drawing. But my issue is this: what wastes a lot of time for me in the new program is when I try to work in multiple windows at once. (Btw, we don't have large screens to work with here.) Usually what I'll do is have, say, three or four windows up at a time, none of which are maximized, and usually have two that I'm working on side by side, with the remaining one or two sitting in the background. I also keep a lot of windows active, and minimized, so that's not the answer I'm trying to find. I work mostly in model space if that makes any difference, though I don't think it should.
Now, not only do the borders of each of my windows get all sorts of funky screen images on them when I move them around (mildly amusing but not annoying), but what really grinds my gears is that the orientation, or layering, or what-have-you, of the windows that I have active and open in the background is not retained. Let's say I have X-1 and A-1 up front and center, and I have A-3 and A-4 in the background. Let's say I had moved A-3 to sit on top of A-4 before I started working on the X-1 and A-1 sheets. Now, in the 2013 version, if I'd slide X-1 or A-1 out of the way, I'd see A-3 sitting right there on top, all happy and pretty where I left it.
AutoCAD Architecture :: Cannot Open Drawings From Previous Releases In 2013 Running On Windows 8
Jan 7, 2013I have ACA 2013 (student version) running in the Windows 8 environment. I cannot open anything drawn in a previous release nor can I open a drawing created in ACA 2013 that was installed on the Windows 7 platform.
I have tried to drag in the drawings through design center. That worked for a while now when I try that it causes ACA to crash. Also I have tried multiple drawings that were created in several different versions of ACA. (2004, 2006 and 2009)
As a side note I was able to open those files in ACA 2013 running on the Windows 7 OS.
AutoCAD LT :: Can't Pan With Wheel On New Microsoft 3500 Mouse
Oct 29, 2010My old microsoft mouse died and i replaced it with a new 3500. For some reason, i cant get it to pan when i use the wheel button. it zooms fine with the wheel... just wont pan. I tried changing the wheel function in Control Panel... unfortunately Pan isn't an option for "program specific" functions. The ACAD help section lists pan as the only function with the wheel button.
View 9 Replies View RelatedAutoCAD Civil 3D :: Export Created Surface From Civil To Revit Architecture
Dec 17, 2013Is it possible to export created surface from civil to revit architecture? If yes , How? And if its not possible - maybe i can somehow import cogo points to revit?
View 6 Replies View RelatedAutoCAD Map 3D :: Export Object Data To Microsoft Excel
Feb 28, 2012I have a object data table attached to many polygon. In this table i have 2 line of data. I want to export in a tabloid like microsoft excel. I know autocad have a command to do this...
View 7 Replies View RelatedAutoCad :: Microsoft Office Doc Will Not Display Correctly As OLE Object
Nov 22, 2013I have two identical computers (dell 745's) running windows 7 and Autocad 2012 (64bit). on one machine opening a drawing which has is a linked OLE document everything displays properly. On the other machine the same drawing is opened and only the top 1/4 or so of the OLE document is displayed in the area allocated to the OLE.
This drawing also displays correctly on a HP laptop running win 7 and autcad2012.
I have dumped the variables from all three machines using setvar and copy and pasting and can see nothing that is different between the machines.
I've used this method a lot in the past using acad2008/win xp pro and did run into a file occasionally the would mess with the OLE but it's been limited to one file once in a while. Now since I've upgraded this one machine refuses to handle any OLE's. I like the editing commands in word better the the limited commands in AutoCAD tables or Exel for that matter.
What variable or settings affect ole's?
Revit :: How To Create Dormer Windows In Architecture 2013
Dec 11, 2012How to create dormer window in revit architecture 2013
View 1 Replies View RelatedAutoCAD 2013 :: Link Microsoft Excel Data With Drawing?
Jul 24, 2013I want to link Microsoft Excel data with AutoCAD drawing (like dimension or values). When I made some changes in Excel data, value in AutoCAD drawing can be changes automatically.
View 1 Replies View RelatedAutoCAD Inventor :: Microsoft Visual C++ Runtime Library Error
Oct 20, 2003I randomly get a Microsoft Visual C++ Runtime Library error when working in Inventor. It points to Inventor.exe and says "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information." I have a Quadro video card, Win XP, plenty of RAM, no other programs running in the background.
View 5 Replies View Related
