I am using ACA 2011. I have a rectangular building with a standard 8" CMU wall pattern. I need to edit that pattern so it reflects a 10x8x8 CMU block. What is the proper procedure to set up a new wall style or can I just tweak the 16" length to show as a 10" length block in this file?
View 1 RepliesI am using ACA 2011. I have a rectangular building with a standard 8" CMU wall pattern. I need to edit that pattern so it reflects a 10x8x8 CMU block. What is the proper procedure to set up a new wall style or can I just week the 16" length to show as a 10" length block in this file?
View 3 Replies View RelatedI'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
Is there a way to create hatching for the slopes surface style instead of using solid colors?
View 2 Replies View RelatedI have two created wall styles, one is a stud wall with gyp bd each side, the other is a cmu wall with gyp bd each side. I want to use a solid hatch which I am able to do but the problem is one wall style the stud hatch is HATCH 1 and in the other wall style the CMU hatch is HATCH 2. It seems as though the two wall styles are tied together some how for if I turn on / off a hatch in one of the wall styles it turns on / off the hatch in the other wall style.
View 4 Replies View RelatedI use ACA 2012 for residential design - I have a wall style, 2x4 stud w/ 1.5" airspace and 3.5" brick (modified from the stock styles) - but whenever I insert a window, it makes it as wide as the wall (9") when it should be only the depth of the stud wall (2x4 or 2x6) - How can I fix this?
View 7 Replies View RelatedI have a wall tool whose style has a sweep attached, when I added the tool to the palette it drops the sweep. I know this was a wish list item a few years back. Has the feature been added that allows me to add the sweep to the tool so I dont have to manually import and add the sweep in every drawing?
View 2 Replies View RelatedAutocad 2013 (64 bit win 7) when selecting a migrated wall style (wall style used in previous version of acad) it shows in properties that it is BASELINE, tho clearly on screen the grips show a left or right justification... THEN when switching the style of the all to something else, it will make the wall BASELINE justification.. which makes the wall move.
View 1 Replies View RelatedIs there a way to compare a wall style in a drawing with the wall style in my library...
I ask you that in case where a property change in my library and a wall is already insert in a drawing...
ACA 2011. I would like to copy the "standard" wall style add a surface hatch and display that in an elevation (exterior) view. I have played around with this and due to many different places to edit the materials.
I have the elevations created. When I go back into the construct and edit the wall style do I have to re-create the elevations to see the hatch? Or I think I just have something set incorrectly in the style.
I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies View RelatedI can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedI am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.
View 9 Replies View RelatedI can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?
I simply want to convert an existing curtain wall to another wall type how is that done/
Can I hatch a 3D solid surface? Do I have to create a 3D face on top of it beforehand?
View 7 Replies View RelatedI have a surface made out of 3Dfaces as shown in the .jpg attachment i added. I would like to have it hatched. What are my options?
I use Civil 2012 and have experience with AutoCAD plain, but only try to learn Civil 3D at the moment.
ACA2011
So... Is it possible when drawing a line to snap to a 'grip'? I've got a drawing that has been converted from PDF to DWG and the wall outlines are gone. What is there is hatching that is the poche. That means I could re-trace the walls if I could snap to the outside grips of the solid hatching that is there.
I am in Civil3D 2012, and am trying to render a retaining wall we doing. I set up a corridor, surface, and profile, and have it working with plans and such, but when I try my hand at rendering it looks rather odd. The surface is fine, and I can choose materials on the vertical wall subassembly, but It just shows a paper thin object ever 25' and a large surface on top. Does the top of the wall need a feature line as well.
View 1 Replies View RelatedI used to be able to snap to the end of the linework that form the visual end or intersection of walls while grip dragging a wall of one style to another. For example, using a wallstyle as a countertop, I'd be able to drag it to the corner of a room and use object snap to the intersection. In ACA 2012, the object snap defaults to the justification plane of the wall even if that's not where the intersection snap is desired.
View 6 Replies View RelatedI quite often like to use the wall grips to adjust the length of a wall. This works really well accept for the occasional situation were I want to snap to the face of another wall rather than the justification line. I know that I can snap to the face of a wall rather than the justification line because I have some files that it works fine in and other files that it does not work in.
View 2 Replies View RelatedIn Revit there is a tool to convert lines to walls including lines of an xrefed AutoCAD file. Is this feature available in ACA?
View 3 Replies View RelatedI did a drawing in ACA2011 sent it to my remote office where I have ACLT for mac 2013 (trial). Worked on the file,
had to explode the couple of walls I was editing, saved as 2011 or 2010 file.
When I open the file in ACA2011 I can not execute the wall tool. This is the message received:
Command: _AecWallAdd Command not allowed because drawing contains objects from a newer version of this application.
The new objects would be lines.
My boss wants me to make the most outside line of a walltype to be the heaviest pen. If I go to the properties of the wall and changethe boundary it changes the boundary of the item in the wall, each boundary independentfrom the other. Such as a wall made of the following: BRICK, AIR SPACE, SHEATHING,STUD AND GYPSUM BOARD. In this wall theexterior face of the brick and gypsum board need to be heavy.
View 4 Replies View Relatedhave trouble moving doors or windows within a wall?
I am trying to move a door so that the door is flush with a face of wall. The prompts in acad do not match the instructions.
For instance; select door, okay. then from anchor panel select 'reposition within wall', okay a red line appears and prompt to 'select position on the opening'. okay so i click the face or side of door jamb then select a reference point. (guide says select point to measure to) and on and on. Door never moves.
it should be; select door, select reposition in wall, select reference point (interior, exterior, midpoint), select the desired location. Done.
Instead it is select this that and the other , measure from here, select, click.click click.
In AutoCAD Architecture 2012: when we insert standard windows in the wall, we usually get a wall break. After changing window size to small (2’ high), this wall break disappears in the plan, but still have it on isometric or perspective view.
View 1 Replies View RelatedIs it possible to create a wall in AutoCAD Architecture that will change in size along its length. At one end of the concrete wall the wall thickness is 12", at the other end the wall thickness is 24" thick. The wall will grow in size from one length to the other.
View 6 Replies View RelatedI have received some architectural models which were modeled in AutoCAD MEP and only have walls modeled as type Standard. Is there a way to transform Standard walls into cavity walls etc., giving wall makeup as you go - or do I have to re-model in order to get quality 2D cuts?
View 1 Replies View RelatedI'm just trying to put a wall under a stair and it seems like I can not succeed. Already tried with interference, body modifiers and trimming.
View 2 Replies View RelatedWhy would a window not go into a wall?
I have a client who is having this issue - when I open the file it works fine for me.
Is there a system variable or setting that could cause this?
I've got a wall style that has multiple components. I have changed one component so the bottom starts 12" below the baseline ht of the wall.The section window display reflects the change, but the wall style won't update.Is there a setting I'm missing somewhere.
View 2 Replies View RelatedHow to group wall types together when scheduling a drawing?
I have multiple wall types within a drawing but scheduling produces multiple entries per type depending on length, only grouping them together when lengths are identical. All I need is a total length per wall type within the drawing.