Is it possible to export created surface from civil to revit architecture? If yes , How? And if its not possible - maybe i can somehow import cogo points to revit?
View 6 RepliesHow to best smooth a surface created from a DEM file? Contours produced from the surface, particularly in the flatter areas seem to be following the triangles, so you can see the rectangular nature of the grid.
I've attached a screenshot with the contours shown. Up to this point when creating the surface, all I did was add a data clip boundary, then add the DEM file (manually within the surface definition, not using the "create surface from DEM" feature). I had tried some of the options under surface edits & smoothing, natural neighbor interpolation, but the results were still all wonky.
I have a profile with an eg surface and a fg surface made from design tool. Now I want to import a proposed surface in there too.
View 4 Replies View RelatedI created a surface in 2013 for an old project by importing a TIN from LDD, which worked fine, but the survey crew recently went back to the same site and did an update (asbuilt) with updated elevations. A good portion of the survey is still accurate and has not changed, but there was an area of new construction. My question is what is the best way to remove the old TIN lines (that are actually still connecting some old, incorrect survey points) and incorporate the new elevations that will now reflect new TIN lines in certain areas. Basically, I need to get rid of some old TIN lines and replace with new and updated survey. The surface in LDD used a point group, which was fine then, but now some of those points in that point group are incorrect.
View 5 Replies View RelatedI am working on and manipulating the data may need to be done using the translate survey database command in the next couple weeks. The surveyors are waiting on some boundary info., which may not be available for a week or so. I have all the points inserted, and line work is done. How I go ahead and build a TIN surface, what tools ,if any are available to rotate a surface after it is originally built. The surface will have to adjusted to match the new location of the points when adjust the data.
View 4 Replies View RelatedI have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
how to import my alignment to google earth so that i can visualize how my alignment goes
as there is no link between google earth and civil 3d 2013
how to export surface to XML
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB
Possible to export a Civil 3d Surface to Agtek?
View 9 Replies View RelatedI extracted the points and TIN lines from a surface and tried to export, but got 0 elevation back.
I map exported the points, selecting points added object data and selected elevation, but upon map import all the points came in at elevation 0. Same thing with the 3d faces.
I have created some surfaces in Civil 3D ...the client wants to render them with Revit but isn't able to. Any way to make my surfaces compatible with Revit ? I'll admit, I don't know which version he is using.
View 4 Replies View RelatedWithin the UKIE Country Kit there is a lsp that exports/imports Surface elevation Analysis data (attached lisp file)
Is it possible to be modified so that a Slope analysis is exported/imported and how easy/difficult it is to do (or even make the alterations themselves!).
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I'm working in Civil3D 2011. How to export the data from the surface volume tables to excel, or any other format outside of Civil3D?
Or maybe a better question: how to create a stage storage table automatically within Civil3D? The elevations table gives volumes per elevation class, but I'm trying to get cumulative volume stored below various elevations in my reservoir.
I have several surfaces pasted to make a composite surface, and a poly line is added as a none destructive boundary.
The surface looks fine on the screen, but when it is exported to LandXML the boundary is ignored, This creates a 120MB XML file, which will not load into Windes for Drainage work.
I can trim the breaklines defining each surfaces, but there is 8 models and 8 different areas to trim in this manor. This would take far too long and would also create 64 surfaces!!!
I customized a surface style to show relative elevations, with lighter tones representing higher elevations, and darker tones representing lower elevations. With a single glance, I know the high and low spots in my project area.
C3d provides several default surface elevation styles. None of them comes close to providing the instant, data-at-a-glance information that my customized style does, which I use to design stormwater systems. Again, it's really useful to see, with one look, where the high and low spots are in my project area.
I can't figure out how to export, transfer, copy, whatever, my customized style from one drawing to a new drawing. If I want to see my customized style, I have to recreate it from scratch in each and every drawing where I want to use it.
How to transfer a surface style from one drawing to another? By the way, I tried opening up both drawings, with both toolspace/settings windows open. Tried dragging and dropping the customized style to the new drawing. Didn't work.
is it possible to export elevations from a surface at a given interval? i can easily export all the data i used to build the surface, but now I am wondering if its possible to export/extract the surface to a CSV or TXT file with a position and elevations, say, every 5 feet?
View 3 Replies View RelatedI was wondering is it possible to create a surface from a Revit model ? There are retaining walls etc in the revit model !
View 1 Replies View RelatedI want to extract contours with elevation labels from a C3D 2011 surface for use in another 2011 drawing without the surface, as polylines and labels. Is there a way to do this?
View 9 Replies View RelatedWe are using Civil 3d 2012 with Topcon Data Collectors. Topcon will not read a profile created by using "create surface profile" command but it will read a profile using "Profile Creation Tools" command. We are not sure if this a civil 3D, Topcon or a LandXML issue?
View 1 Replies View RelatedI need to output the contours my surface model to a genio for use in Mx. I have the Genio exporter tool installed but when i output the genio all that appears is the Boundary line without the contours, which when i think about it makes sense as the surface contours is more a display option rather than actual contours. Is there a way of exporting the contours via genio.
View 4 Replies View Relatedwith the Genio Exporter. I need to export the surface triangles from my job, but the Genio export dialouge box only gives me the option to export suface boundaries.
View 4 Replies View RelatedI need to export the surface lable table report into microsoft excel format.
View 5 Replies View RelatedI often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
Has instances where you set your tolerance for the maximum triangle lenth to say 50m to reduce the amount of triangles along the edge that run at long distances. When I do this I end up with multiple surface holes and I'm not sure why as there are points in the area.
I thought well maybe it's because i should've reduced my max triangles first then added breaklines. Would this matter? I also thought I could add a line to the surface to fix the holes vs. deleting surface lines along the entire edge of a surface for many many miles.
I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
My goal is coming up with the volume bounded by the design surface and the existing surface. I don't have the design surface modeled yet.
Do i need to create alignment offsets?. Alignment 1 profile view is also attached. Then Alignment2.
What about starting with alignment1 profile view? Since I have created a polyline as the design profile ?
how do I shrink labels? Where is it in the settings ; the Align folder had been check.
I am issues with DEM files that I am downloading from the USGS website.I download 24k, elevation for the area I need. I then choose staged 1 second, add a surface to a blank drawing, then upload the DEM files to the surface.
The surface imports correcty, but when I try to import points taken by a surveyor on the same drawing, they plot incorrectly.The DEM surface and the points from the surveyor do not correspond. Also, the DEM surface is in meters, not feet. I have tried changing drawing settings, datum types, coordinate types, etc.
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
I need to create a sub-set surface from my main surface. not sure what the vernacular is for a "subset surface" in c3d but i do have a feature line that bouinds the desired area, but that is as far as i can solve.
i did try creating a new surface - pasted the main surface in the edit definition, then deleted triangles until the boundary alighned wiht my featureline. This seemed to work, but when i view the properties of the smaller subset suface, it shows a mimum and maximum elevation that is incorrect.
Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
all of a sudden whenever I run audit on my corridor file the surface definition becomes a snapshot. To add to the drama, the corridor surface will not paste into an empty surface. Why?
View 2 Replies View Related