AutoCAD Civil 3D :: Export / Import Surface Analysis

Sep 7, 2011

Within the UKIE Country Kit there is a lsp that exports/imports Surface elevation Analysis data (attached lisp file)

Is it possible to be modified so that a Slope analysis is exported/imported and how easy/difficult it is to do (or even make the alterations themselves!).

IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600

View 5 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Can't Use Import / Export Under Planning And Analysis

Aug 12, 2013

I get this message FDO provider 'OSGeo.SHP.3.8' everytime I try to import polylines into shapefile format.

View 2 Replies View Related

AutoCAD Civil 3D :: Surface Volume Analysis

Jan 3, 2014

I have a large 200+ acre site that I have created a volume surface and analyzed it using the elevation banding with color to show different levels of cut and fill.  The owner has broken this area into 10 different irregular zones.  Is there a way to do the elevation banding of a volume surface and have it color the individual parcels.  They don't all have to be at once.  I can do each one at a time and PDF the drawing.

View 2 Replies View Related

AutoCAD Civil 3D :: Exporting Surface Analysis

Jul 11, 2013

We have an "original" existing surface of a ditch, a massive ditch. dredging has taken place and now we have a new existing surface of the ditch. the client wanted to see the delineation between the areas that are now 3" lower, 6" lower and 9" lower (and so on). I was able to do this easily with elevation banding. now the client would like some sort of GPS uploadable based on the color map that shows the banding. How to accomplish this without having someone set there and set points along the different colors on the surface. that is going to be incredibly time consuming. is there an automated way to export the data that I am looking for?

View 7 Replies View Related

AutoCAD Civil 3D :: Surface Analysis And Transparency

Nov 6, 2013

It appears color transparency for surface analysis is now broke in 2013.  It used to work in 2011 because I use to bring in Lidar data and run elevation analysis over top of aerial photos. I never found any type of resolution.  Is Autodesk aware and are they working on this?

This issue reminds me of the Point Cloud issue with Lidar data right after 2013 came out.  It worked in 2011 just fine and then 2013 they broke it.  After calls to autodesk support and thread exchanges plus several months of waiting, service pack 2 for 2013 fixed the lidar classification issue.

View 3 Replies View Related

AutoCAD Civil 3D :: Surface Analysis By Elevation?

Feb 8, 2006

I've tried to create a surface analysis by using a point group reading xdata to set the elevations and when I set my surface properties to display the elevation shades it will only allow me to set the range to 5 or less. All of the other analysis settings for direction, slope, and slope arrows allow me to input the nuber of ranges I want, but I need the elevation analysis.

View 5 Replies View Related

AutoCAD Civil 3D :: Depth Analysis Between Two Surface

Feb 8, 2013

 I have two surface ( OG surface and Gravel LIFT ), i need to have a table that Show me Depths range between those two surface with a color range, in a table and also to be able to see it in the the top surface.

Basically, In every Spot of the surface, need to represent a Depth range between the OG and the gravel surface by a specific Color.

View 4 Replies View Related

AutoCAD Civil 3D :: Surface Analysis Range Colours

Oct 31, 2012

Is there a way to automatically adjust the cut range colours (REDS) in the attached scheme such that the lighter colours denote lower cut depths in the same way that the fill range does (Greens)

I know they can be manually adjusted but when the analysis is run again the colours revert back

(No connection with Autodesk other than using the products in the real world)

IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600

View 5 Replies View Related

AutoCAD Civil 3D :: Default Surface Analysis Type?

Jun 20, 2013

I am working on a commercial development with multiple large tenants with multiple standards.  To begin to verify the preliminary grading is in compliance, I use the slope arrow surface analysis type.

Due to my multiple standards, I find myself changing these values frequently.  My question : Is there a way to make the slope arrow the default analysis type when you are in the surface properties dialog box? 

I know it is not a major issue, but it is annoying and repetitive, having to go to the list box, and select slope arrow over and over again.  One workaround I have considered to avoid this maddening situation is to make two surfaces, with each criteria assigned to the surface properties and simply paste the main surface into each.  Then control which is visible based on what I need to look at.

View 1 Replies View Related

AutoCAD Civil 3D :: Cut And Fill Analysis / Values Different - Corrupted Surface

Jul 10, 2012

I was undertaking a cut and fill analysis but the values were very different. Evaluating spot levels the depth was given as 1.2m but the volume surface stated it was only .6m.

After a while I noticed that the master surface had been "corrupted" duing a recovery, all definitions to the controlling corridor and other objects had been removed and a snapshot added with the description "added during recovery".

I had to remove the surface and start from scratch re-building the definitions.

Civil3D 2013 / 2014
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB

View 3 Replies View Related

AutoCAD Civil 3D :: Import Surface Into Revit To Merge Surface And Buildings Together?

Jul 29, 2013

I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.

The questions:

Would it be better to import the surface into Revit to merge surface and buildings together?

Would it be better to import the buildings into C3D to merge entities?

Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?

View 6 Replies View Related

AutoCAD Civil 3D :: Export Created Surface From Civil To Revit Architecture

Dec 17, 2013

Is it possible to export created surface from civil to revit architecture? If yes , How? And if its not possible - maybe i can somehow import cogo points to revit?

View 6 Replies View Related

AutoCAD Civil 3D :: Export Parcel Analysis To Show Degrees Minutes And Seconds Instead Of Default Decimal Degrees

May 18, 2012

How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...

(running C3D 2012 sp4, Win7 64bit, 8GB)

View 1 Replies View Related

AutoCAD Civil 3D :: How To Export Surface To XML

Aug 7, 2012

how to export surface to XML

Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB

View 2 Replies View Related

AutoCAD Civil 3D :: Export A Surface To Agtek?

Jun 8, 2012

Possible to export a Civil 3d Surface to Agtek?

View 9 Replies View Related

AutoCAD Civil 3D :: Export Surface To GIS Revisited

Jun 22, 2012

I extracted the points and TIN lines from a surface and tried to export, but got 0 elevation back.

I map exported the points, selecting points added object data and selected elevation, but upon map import all the points came in at elevation 0. Same thing with the 3d faces.

View 1 Replies View Related

AutoCAD Civil 3D :: Export Surface Volume Tables?

Mar 7, 2012

I'm working in Civil3D 2011.  How to export the data from the surface volume tables to excel, or any other format outside of Civil3D?  

Or maybe a better question: how to create a stage storage table automatically within Civil3D?  The elevations table gives volumes per elevation class, but I'm trying to get cumulative volume stored below various elevations in my reservoir.

View 9 Replies View Related

AutoCAD Civil 3D :: Export To XML Ignores Surface Boundaries?

May 28, 2012

I have several surfaces pasted to make a composite surface, and a poly line is added as a none destructive boundary.

The surface looks fine on the screen, but when it is exported to LandXML the boundary is ignored, This creates a 120MB XML file, which will not load into Windes for Drainage work.

I can trim the breaklines defining each surfaces, but there is 8 models and 8 different areas to trim in this manor. This would take far too long and would also create 64 surfaces!!!

View 7 Replies View Related

AutoCAD Civil 3D :: How To Export Surface STYLE To Different Drawing

Feb 10, 2012

I customized a surface style to show relative elevations, with lighter tones representing higher elevations, and darker tones representing lower elevations.  With a single glance, I know the high and low spots in my project area.

C3d provides several default surface elevation styles.  None of them comes close to providing the instant, data-at-a-glance information that my customized style does, which I use to design stormwater systems.  Again, it's really useful to see, with one look, where the high and low spots are in my project area.

I can't figure out how to export, transfer, copy, whatever, my customized style from one drawing to a new drawing.  If I want to see my customized style, I have to recreate it from scratch in each and every drawing where I want to use it.

How to transfer a surface style from one drawing to another?  By the way, I tried opening up both drawings, with both toolspace/settings windows open.  Tried dragging and dropping the customized style to the new drawing.  Didn't work.

View 9 Replies View Related

AutoCAD Civil 3D :: Export Surface Elevation Values

Nov 15, 2013

is it possible to export elevations from a surface at a given interval?  i can easily export all the data i used to build the surface, but now I am wondering if its possible to export/extract the surface to a CSV or TXT file with a position and elevations, say, every 5 feet?

View 3 Replies View Related

AutoCAD Civil 3D :: Extract And Export Surface Contours And Labels

May 4, 2011

I want to extract contours with elevation labels from a C3D 2011 surface for use in another 2011 drawing without the surface, as polylines and labels.  Is there a way to do this?

View 9 Replies View Related

AutoCAD Civil 3D :: Export To LandXML From Create Surface Profile

May 8, 2012

We are using Civil 3d 2012 with Topcon Data Collectors.  Topcon will not read a profile created by using "create surface profile" command but it will read a profile using "Profile Creation Tools" command. We are not sure if this a civil 3D, Topcon or a LandXML issue? 

View 1 Replies View Related

AutoCAD Civil 3D :: Export Contours From Surface Using Genio Exporter

Nov 5, 2013

I need to output the contours my surface model to a genio for use in Mx. I have the Genio exporter tool installed but when i output the genio all that appears is the Boundary line without the contours, which when i think about it makes sense as the surface contours is more a display option rather than actual contours. Is there a way of exporting the contours via genio.

View 4 Replies View Related

AutoCAD Civil 3D :: Import Google Earth Image And Surface?

Nov 13, 2010

I am trying to import a surface and Image from Google Earth.  Basically my steps are as follows:

start GE and C3D find area that I need on GE and zoom in under C3D, insert GE Image and Surface (then it goes straight into select point, and rotation)

Like most discussions i've read.., the import slows down at 49%, and then it chugs for hours if I let it. So i have to cut the cord and re-start both programs.

I saw in a discussion that there are settings that we can change the rows and columns to something like 70x70.

however.... I cannot find where to update this.  I typed importgesurface, and clicked on the ribbon as well..., then tried to right click, but it does not take me to the settings. I also figured that I might have to run C3d as admin, but no luck either.

find these settings so I can change them to import a surface and image that is about 15acres?

Running:
Sony Vaio
intel core i7
8GB Ram
64bit Windows 7 Pro

View 5 Replies View Related

AutoCAD Civil 3D :: Import Google Earth Image And Surface?

Feb 4, 2013

I have no problem bringing my google earth image and surface into autocad civil 3d 2011...but when I do bring it in the elevations are not correct...I'm bringing in a google image that have an island over water.... the units are wrong even though i changes to units in autocad...what do I have to do in order for google earth to import the correct elevation into autocad civil 3d 2011 ?

View 5 Replies View Related

AutoCAD Civil 3D :: Exporting Surface Triangles Using Genio Export Extension (2013)

Mar 11, 2013

with the Genio Exporter. I need to export the surface triangles from my job, but the Genio export dialouge box only gives me the option to export suface boundaries.

View 4 Replies View Related

AutoCAD Civil 3D :: Export Surface Label Table Report Into Excel Format

Oct 16, 2012

I need to export the surface lable table report into microsoft excel format.

View 5 Replies View Related

AutoCAD Civil 3D :: Import Point File And Assign Elevation Based On Existing Surface

Apr 12, 2012

I have a bunch (hundreds, so manual input not an option) of X,Y points without elevation data that I would like to import into a DWG and assign an elevation that is based on an existing surface object.  Is there a way to do this for a point file? The command for inserting individual points would be the "Create points - Surface > Random" but I don't see a way to do this in a batch type method where i have my PNE formatted input file to just move the points to sit on the existing surface. 

View 2 Replies View Related

AutoCAD Civil 3D :: Import / Export Layer Filters?

Jun 20, 2008

Notice that the import / export Layer filters is missing in 2009?

View 9 Replies View Related

AutoCAD Civil 3D :: Import / Export Custom Assemblies Palette?

Apr 13, 2012

I recently made a custom Tool Palette that contains all of our most commonly used Assemblies in our office on my PC. I then exported the Paleette to a location on our network and tried to import it onto another workstation. The Palette imported correctly and all of the assemblies are visible. However, when an assembly is attempted to be inserted into a drawing nothing is inserted.

Upon insertion the properties menu box shows up indicating that it is closed or locked..."do you wish to continue".

Is there a step that I am missing on importing or exporting of assemblies or Palettes?

View 1 Replies View Related

AutoCAD Civil 3D :: Missing Import / Export Styles On Ribbon

Nov 8, 2013

I'm trying to import some label and table styles from another drawing and can't seem to do it. I followed the tutorial offered here until I got to the "Manag" ribbon in my Civil 3D and found that the Styles "import Export" option is not there.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved